Mesin bubut tengah

🇧🇬 ZMM Bulgaria: Drehmaschinen CU-Serie (z.B. CU 400, CU 500, CU 580) C

Kondisi: bekas, Technical details: Maximum ram stroke: 250 mm Maximum workpiece diameter: 80 mm Maximum workpiece length: 900 mm Total power requirement: 1.5 kW Approx. machine weight: 2.1 t Fpodpjw Au I Iofx Adgob Various accessories *

Kondisi: bekas, various types available Fpjdpfxodc A Sbj Adgob

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Fjdpfxsxddvne Adgspb Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 2016, Technical Details: Swing over bed: 402 mm Swing over cross slide: 245 mm Turning length: 1000 mm Distance between centres: 1000 mm Centre height: 200 mm Faceplate swing diameter: 560 mm (with gap) Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper: ISO MK4 Tailstock quill stroke: 180 mm Total installed power: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.4 x 1.0 x 1.7 m Fpjdpovav Sdsfx Adgeb The lathe is not equipped with rapid traverse. Axis positioning: 2 axes Read-out: Pinacho Lathe Controller Multifix tool holder with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Fjdpskvnumjfx Adgjpb Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en-001 Fsdpjwl U Rhofx Adgspb

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, diameter rol atas: 200 mm, diameter roll samping: 150 mm, ketebalan lembaran (maks.): 6 mm, panjang kerja: 3.000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Top roller diameter 200 mm Fjdpfxjuzm Ays Adgepb Side roller diameter 150 mm Hydraulic drop-end

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: 01-15792, Offer 24194 Technical Specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 – 135° Fpjdpfx Ajtylguodgeb - Bending angle lockable with end stop - Upper beam operated via side handwheel - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by counterweight - Required space: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1620 kg

Kondisi: bekas, Tahun pembuatan: 1986, Sheet thickness 6.0 mm Fpodpfx Adjg Ip Efogob Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Required space approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Kondisi: baik (bekas), Tahun pembuatan: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Fpedovi Hryepfx Adgob Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5 - 180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further specifications, see data sheet. Machine documentation available. Machine dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.