Printer 3D

3D Systems Projet 3500 HD Max Printer

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, 3D Systems ProJet 3500HDMax 3D printer – purchased in 2013, good condition, fully operational. Hfedewnbd Hjpfx Abhsc

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 937 h, 3D printer, manufacturer: 3D Systems, model: Projet 2500 Plus Year of manufacture: 2021 Hfedpfx Aouvingsbhoc Total print time: 937 hours.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Passage width: 170 mm Speed: approx. 25 m/min Direction of operation: optional Working roller diameter: 120 mm Bale length: 150 mm Hfodpfxjp E Egls Abhjc Support rollers: support block/chain

Kondisi: baik (bekas), Tahun pembuatan: 2003, panjang pembubutan: 1.505 mm, Turning and Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Hodpswzbq Tsfx Abhsfc Control system: Sinumerik Power line Technical Specifications: Main spindle ISM 90 drive power: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Magazine capacity: 120 slots Milling spindle tool holder: HSK 63 Counter spindle ISM 90 drive power: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed for driven tools: Number of turret stations: 12 Tool holder: VDI 40 Equipment: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D touch probe - Tailstock function for counter spindle - Automatic sliding doors

Kondisi: bekas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar diameter: 90 mm - Max. machinable diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260/795 mm - Travel Y: +/-50 mm - Tool type: BMT - Driven tool speed: 10000 rpm - Driven tool power: 5.5 kW Hfodpfx Aox H Atysbhsc ELECTRICAL SUPPLY - Supply voltage: 400 V - Total installed power: 41 kW MACHINE HOURS - Power-on hours: 21392.8 h - Operating hours: 13797 h ACCESSORIES - Control: CELOS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-colour status light - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool measuring probe - Parts removal unit - Parts conveyor belt - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of fixed tool holders: 10 - Collet chuck

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Opsi: Persiapan lunette Hfjdpfoxyf Udsx Abhoc Lunette SMW K4 Konveyor serpihan Pompa tekanan tinggi 15 bar Tool Eye Center tailstock EIA/ISO Detektor kelebihan beban Tap sinkronisasi Peralatan

Kondisi: bekas, Tahun pembuatan: 1991, Press force 500 t Upright width 1910 mm Stroke 500 mm Distance table/ram, max. stroke upper position, adj. upper position 700 mm Table area without shear impact damper 1910 x 1360 mm Table area with shear impact damper 1600 x 1360 mm Table height above floor 800 mm Ram area 1600 x 1270 mm Side frame opening 600 mm Hfedpovuuiqjfx Abhec Downward speed 400 mm/s Upward speed 330 mm/s Working speed 10 - 28 mm/s Oil capacity 1200 l Drive power 60.0 kW Weight 40.0 t Space requirement (LxWxH) 3.6 x 2.5 x 5.0 m Total height above floor 4.5 m Approved for manual loading operations according to German accident prevention regulations (UVV) with hydraulic drive system, shear impact damping, ram locking, two-hand control Table size depending on shear impact damper: - Without: approx. 1910 x 1360 mm - With: approx. 1600 x 1360 mm Can be offered as-is, ready for operation as currently equipped, or alternatively with new Siemens S7-1500 F control system

Kondisi: sangat baik (bekas), 3D Systems We are offering a 3D printer for sale. Solid-State Nd: YVO4 with frequency tripling Wavelength: 354.7nm Rated power at the laser head: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ Coating System: Hedponkalgsfx Abhefc Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Build layer thickness: Minimum 0.05mm, maximum 0.15mm ProScan™ Scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Large line detection, nominal: 0.76mm Maximum drawing speed Edge detection: 3.5 m/sec Large line detection: 25 m/sec Build volume: RDM 750F: 650mm x 750mm x 550mm; 414 liters Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Packed weight (without RDM): 1590kg Model: iPro 8000 Condition: used Scope of delivery: (See photos) (Changes and errors in technical details and information reserved!) If you have any further questions, we are happy to answer them by phone.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, panjang total: 3.000 mm, tinggi total: 2.000 mm, en-industrial-3d-printer-sinuprint-3000 Industrial 3D Printer – Sinuprint 3000 A state-of-the-art solution for large-format 3D printing, ideal for mold making, design elements, composite parts, and structural components. The Sinuprint 3000 combines the flexibility of a robotic system with the precision of CNC control, making it the perfect choice for companies seeking a robust and scalable additive manufacturing solution. Areas of application range from mold and shipbuilding to interior construction and customized large-scale structures. Technical Specifications: Printing System: CEAD E25 or S25 extruder (optional, as per customer requirements) Robotic Arm: COMAU N-170, 3 m reach, 160 kg payload Control System: Siemens SINUMERIK ONE – complete CNC control for maximum precision Software Compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Hfodowgkqtepfx Abhsc Condition: New machine Optional Equipment: Heated print bed for optimized adhesion and print quality Note: The standard configuration includes the CEAD E25 extruder. Software is not included but can be offered as an option.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to standard plastics such as ABS, PLA, TPU, and Carbon PA, high-performance polymers like Ultem, Peek, CarbonPeek, and Helios-Peek are also available. Hsdpfsibikwex Abhsfc The hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware/software and service. Four material dryers are included in the scope of delivery. Payment terms: Advance payment, excluding transport and commissioning – these costs depend on the delivery address and will be invoiced accordingly.