Beli Mesin frais bentuk bekas (24)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, lebar meja: 1.520 mm, panjang meja: 6.200 mm, jarak pergerakan sumbu X: 6.821 mm, jarak lintasan sumbu Y: 1.963 mm, jarak gerak sumbu Z: 663 mm, produsen pengendali: BIESSE, model controller: XP600 PC-based control with Windows XP WRT, daya motor spindle: 9.000 W, kecepatan spindel (maks.): 22.000 rpm, jumlah slot dalam magazin alat: 22, jumlah sumbu: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a 22-position tool changer. If you are looking for a high-quality CNC machining center, consider the BIESSE Rover C 9.65, which we offer for sale. Contact us for further details. • X-axis drive system: rack and pinion • Y-axis drive system: ball screw • Z-axis drive system: ball screw • Guidance system: linear guides with ball carriage blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5-axis interpolating machining unit Isdpfx Anezugvroketn • Spindle power S1: 8 kW at 12,000 rpm • Spindle power S6: 9 kW at 12,000 rpm • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis rotational speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolating) • B-axis rotational speed: 13.5 rpm • Z-axis feed rate: 30 m/min • Vacuum system: multi-zone vacuum with dual-side connections • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Work table: ATS system with modular pads • Number of work supports: 10 • Number of modules: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Uniclamp clamping force: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Boring unit: BH 42 L • Vertical boring spindles: 29 • Horizontal boring spindles: 6 (double power) • Slot saw diameter: 120 mm • Boring spindle speed: up to 6,000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool pitch: 180 mm • Max. tool diameter (full load): 175 mm • Max. tool diameter (single): 250 mm • Max. tool length: 268 mm • Max. tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max. pick-up tool weight: 8 kg • Electrical connection: 380/400/415 V 50/60 Hz • Spindle inverter: up to 14 kW • Cooling system: liquid cooling for electrospindles (1600 W) • Lubrication system: automatic central lubrication • Safety system: CE-compliant with safety mats, guards and emergency stop • Chip removal: integrated chip conveyor In 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Mesin frais CNC, tahun pembuatan 2009. Mesin MECANUMERIC Pro 3015 ini hanya digunakan dalam waktu singkat dan memiliki total waktu operasi hanya 1.369 jam. Mesin ini berada dalam kondisi mekanis yang sangat baik, namun bantalan spindel perlu diganti. Saat ini, mesin ini terhubung ke jaringan listrik dan dapat diuji hingga sekitar akhir September 2026. Jika Anda mencari kinerja frais berkualitas tinggi, Anda sebaiknya mempertimbangkan MECANUMERIC Pro 3015 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kondisi: jarang digunakan • Total jam operasi: 1.369 jam • Kondisi mekanis: sangat baik Itedpfjz Arwkjx Ankon • Catatan perawatan: Bantalan spindel perlu diganti • Sumber daya/status pengujian: Saat ini terhubung ke sumber daya dan dapat diuji • Ketersediaan untuk pengujian: Pengujian diperkirakan dapat dilakukan hingga sekitar akhir September 2026

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Mesin Bor Bawah FAMOT TNFJ lignum Merek: Famot Model: TNFJ Deskripsi: Produsen: FAMOT Model/tipe mesin: TNFJ Tahun produksi: 1966 Iodpfxey Twqys Ankjtn MESIN MILIK KOLEKTOR, SETELAH RENOVASI UMUM MESIN BOR FAMOT SETELAH RENOVASI UMUM, INSTALASI LISTRIK BARU, SPINDEL YANG DAPAT DITUKAR UNTUK MESIN KERUCUT MORSE, KONDISI UMUM SANGAT BAIK, PENUTUP BARU DENGAN PELAT PENAHAN BARU, MESIN DAPAT DIGUNAKAN SEBAGAI PENGASAH Tahun: 2000

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, MESIN FRAIS VERTIKAL TECNOMAX MOD. ROUTER - Tahun 2006. Iedpfx Anex Rc Ncjketn

Tahun pembuatan: 1976, Kondisi: siap digunakan (bekas), I am selling a tenoning machine for parallel milling of grooves for pallet slats, etc. WACO T2-SL Year of manufacture: 1984 Groove width: 30 mm Motor: 3.3 kW Made in Germany. Iodsh Hp U Sepfx Ankotn Available immediately. Comes with documentation.

Kondisi: sangat baik (bekas), Mesin penggiling vertikal/mesin router kayu model MXS5115A untuk penggunaan industri, cocok untuk bengkel pengolahan kayu profesional. Ideal untuk membuat profil, alur, membentuk tepi, dan melakukan operasi pemotongan khusus pada kayu solid dan panel berbasis kayu. Spesifikasi: • Model: MXS5115A • Ukuran meja: 650 × 580 mm • Ketebalan kerja maksimum: 120 mm • Kecepatan spindel: 18.000 rpm • Ukuran collet: 6,3 mm / 12,7 mm • Daya motor: 2,2 kW • Catu daya: 380 V, 3 fase Fitur: • Meja kerja besi cor yang kokoh • Spindel berkecepatan tinggi untuk proses routing dan pembuatan profil yang presisi • Konstruksi untuk penggunaan industri • Cocok untuk produksi furnitur, pembuatan lemari, dan pekerjaan pertukangan • Penyesuaian dan pengoperasian yang mudah Kondisi: • Kondisi kerja yang baik. • Siap digunakan. • Pemeriksaan dan pengujian dipersilakan. Iodpfx Anszmukujketn

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kopierfras_und_schleifmaschine_balestrini_cp90_4 Iodpfx Anox A Hatoketn

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, MESIN FRAIS POROS VERTIKAL CAMAM MOD. FV-1T-1P - SESUAI STANDAR CE - Voltase: 380/50 Itsdpox Rdhtofx Anksn - Tahun: 1998 - DILENGKAPI DENGAN MANUAL DAN DEKLARASI CE

Kondisi: bekas, Tahun pembuatan: 2009, Berat 10 kg Ijdpox U A Nqjfx Ankjtn Tahun pembuatan sekitar 2009 Kepala SK50 x Dikemas dalam koper

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Mesin frais untuk membuat ujung perkakas Comec FT-CD-CA-650 Itjdpfx Asz D H Econksn Jumlah kepala frais per sisi: 1 Panjang benda kerja sekitar maks./min. 650-220 mm Pemuatan material otomatis dari pengumpan Pengoperasian berdasarkan templat

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, lebar total: 5.851 mm, jarak pergerakan sumbu X: 3.140 mm, jarak lintasan sumbu Y: 1.260 mm, jarak gerak sumbu Z: 245 mm, berat keseluruhan: 3.000 kg, produsen pengendali: BIESSE, model controller: HH660 PC-based control, daya motor spindle: 13.200 W, panjang produk (maks.): 7.116 mm, kecepatan spindel (maks.): 24.000 rpm, jumlah sumbu: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm on the X-axis, 1260 mm on the Y-axis, and a maximum travel on the Z-axis of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and accommodates a maximum tool diameter of 113 mm. If you are looking for high-quality CNC machining centers, you should consider the BIESSE Rover A 1232 we have for sale. Contact us for further details. • Supply voltage: 400 VAC • Full load current: 31.7 A • Number of supply phases: 3 • Installed power: 18.66 kW • Frequency: 50 Hz • Short-circuit protection: 10 kA RMS Sym • X working area: 3140 mm • Y working area: 1260 mm • Z working area: 245 mm • Maximum panel thickness: depends on vacuum module height (H74/H29) and tooling setup Isdpszugwpjfx Ankjtn • Workpiece support length: 1200 mm • Vacuum pump capacity: 90 m³/h • Vacuum pump capacity at 60 Hz: 108 m³/h • Vacuum system: dry pump • Electrospindle power: 13.2 kW • Electrospindle speed: 12,000 to 15,000 rpm S1 • Electrospindle speed: 12,000 to 24,000 rpm programmable • Tool holder: HSK F63 • Bi-directional spindle rotation (clockwise and counterclockwise) • Two separate tool magazines installed: • Tool magazine with 8 positions (rear/Y-axis) • Tool magazine with 13 positions (main/X-axis) • Maximum tool diameter: 113 mm • Maximum tool length: 110 mm • Maximum tool weight: 7.5 kg • Maximum total magazine weight: 32 kg • Vacuum system: Configurable vacuum pump system. Available configurations: • 2 × 90 m³/h • 2 × 100 m³/h • 1 × 250 m³/h

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tipe: OPTIMAT F 13 Tahun pembuatan: 2001 Kondisi: Diuji fungsinya, sangat baik, bekas - Ketebalan benda kerja: 16 hingga 55 mm - Lebar benda kerja minimal: 30 mm - Radius dalam minimal: 35 mm Itsdpfox Rrbzjx Anken - Ketebalan tepi maksimal: 3 mm - 2 motor frais 0,4 kW - Koneksi ekstraksi: 80 mm

Kondisi: bekas, 2-SPINDLE ROTARY SHAPING MACHINE (1 FOR MILLING, 1 FOR SANDING) - Complete with 3-sided enclosure Itjdpfxjwrh E Ej Ankjn - Max. workable diameter: 800 mm

Kondisi: bekas, Tahun pembuatan: 1995, nomor mesin/kendaraan: 1/95, 6-station CAMAM rotary profiling, milling, and sanding machine mod. GC6/4F/1L – used - With double clamping - 1 group for internal/external milling - 1 group for internal milling - 1 group for external milling - 1 group for external sanding - Voltage: 380/50 Itedpfxoqmnido Ankon - Serial no. 1/95 - Complete with four-sided enclosure and roof - Year: 1995

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 4.250 mm, jarak lintasan sumbu Y: 2.280 mm, jarak gerak sumbu Z: 150 mm, berat keseluruhan: 6.300 kg, daya motor spindle: 18.000 W, kecepatan spindel (maks.): 24.000 rpm, jumlah sumbu: 3, This 3-axis CNC milling machine, SCM Accord 20, was manufactured in 2010. It features a working area with dimensions of 4250 mm on the X-axis and 2280 mm on the Y-axis, making it suitable for nesting production and woodworking applications. The machine is equipped with a high-performance electrospindle, offering a speed range from 600 to 24,000 rpm, and a side-mounted tool changer with 10 positions. If you are looking for high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. • Typical applications: Nesting production; window and door manufacturing; stair component fabrication • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min • Lubrication: Automatic centralized lubrication system • Worktable: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly on the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in the working range (12,000–18,000 rpm); clockwise/counterclockwise rotation; fan-assisted air cooling; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max. 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, each 250 m³/h • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphical programming editor; DXF import; subprogram and macro management • Electrical: 400 V; 50/60 Hz • Construction: Heavy-duty welded gantry; high-strength industrial frame; aluminum matrix table mounted directly on the base • Safety: Fixed safety fencing on two sides; CE marking Itedpjzug Hwjfx Anksn • History/Condition: Single owner from new; continuously used in one company; regularly maintained; technical condition very good Additional equipment: • Automatic dust extraction hood

Kondisi: bekas, Machine cleaned, lubricated, made operational, function-tested, partially overhauled, adjusted, trial run performed Used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 3811 Column machine Chain gear set Door support Handle hole motor Faceplate motor Lubrication device Space required approx. 1200 x 700 x 2000 mm Weight approx. 300 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, Itjdpfxjvxr R Ho Anken without guarantee or warranty

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: 9813, FIXED SHAFT SPINDLE MOULDER SAC SUERI MOD. TS110 - CE COMPLIANT - USED Isdpfxewrh Hvj Ankstn - Extended tables 2400 mm - Volt. 400/50 - Serial no. 9813 - Year 1998 - *M42 - Complete with manual and CE declaration

Kondisi: bekas, Tahun pembuatan: 2002, nomor mesin/kendaraan: 02010, BERMAQ C.T.C. single-spindle copy-milling machine – CE marked – used - Boring unit - Spindle moulder (toupie) - Serial no. 02010 - Year 2002 Iedeua Aztepfx Anketn

Kondisi: bekas, Tahun pembuatan: 1997, FIXED SPINDLE MOULDER GRIGGIO MOD. T220 - CE - USED - Year 1997 - Complete with manual and CE declaration Itjdpfxjwrh Iye Anken

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, en-001 Itodpfx Aszbc Rtenken

Kondisi: bekas, used Manufacturer: Haffner Model: SL 100 Upright machine Door support Workpiece support Handle hole motor Faceplate motor Lubrication system Mechanical workpiece clamping Ijdpfsvxr R Tex Ankjtn Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without any warranty or guarantee

Kondisi: bekas, Tahun pembuatan: 2003, DOUBLE TENONING MACHINE BACCI MOD. TSD-E - CE CERTIFIED - USED - Working length: 1200 mm - Maximum tenon length: 100 mm - Hourly output: 2400 tenons (1200 pieces) - Cutter spindle speed: 9,000 rpm Itedpfx Ansmxktpjken - Cutter motor power (qty 2): 8 hp total (4 hp each) - CNC control - CSF automatic loader - Voltage: 380V/50Hz - Serial no.: 772 - Year: 2003

Tahun pembuatan: 1997, Kondisi: bekas, CAMAM GC6/4F-4L Edge Contouring Carousel - USED - No. 2+2 (internal + external) milling units - No. 2+2 (internal + external) sanding units - Workpiece holding pressure devices - No. 6 work stations Isdpehz Dlbofx Ankjtn - Three-sided soundproof enclosure with roof - Control panel - Voltage: 380V/50Hz - Serial no. 73 - CE marked (year 1997)

Kondisi: bekas, DOUBLE-END TENONING MACHINE BALESTRINI MOD. TTSA - USED - Equipped with loader - Control panel - Min/max working length: 240 / 1200 mm - Maximum tenon size: 100x30 mm - Hourly output: 1200 tenons (600 pieces) Itsdpjwrh N Defx Ankjn - Cutter rotation speed: 9,000 rpm - Total installed power: 9 kW