Beli Instalasi sabuk bekas (71)

Kondisi: bekas, materialbreite-320-mm-coilgewicht-2-6-t Iodpovuk Shsfx Adqsbc

Kondisi: bekas, Decoiler Line, Uncoiler, and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and insertion aids Required space for the entire system (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through width: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Roller diameter: Ø 40 mm Number of pull rollers: 2 pcs Pull roller diameter: Ø 80 mm Entry/exit height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, centrally supported - Pull rollers hardened, ground, and hard-chromed, with hydraulic lifting - Manual adjustment of straightening rollers - Infeed aid with hydraulically extendable tongue and hydraulically adjustable deflector roller - Adjustable lateral strip guidance - All straightening rollers driven via distribution gearbox and cardan shafts - Both pull rollers driven via gearbox and cardan shafts - Frequency-controlled drive via gear motors - Straightener opening stroke of 250 mm for cleaning or processing thicker material, stroke by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with loading saddle) Coil outside diameter: max. 2000 mm (without loading saddle) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expansion range: 460-520 mm Coil width, nominal: max. 630 mm Ijdpjif Sg Sefx Adqebc Spreader jaw width: 750 mm Mandrel height above floor plate: 1500 mm - Mandrel drive by hydraulic motor and gear - Pneumatic overrun brake at the mandrel TWINFLEX - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil loading saddle with 12 ton lifting capacity and 300 mm stroke - Uncoiler in above-floor travel frame with motorized cross-travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (freestanding) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (freestanding) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, Lg 33922 Decoiler-Straightener Combination SOPREM BRH 7-200-80U-1250 BAP Strip width max. 200 mm Iedjhuwacopfx Adqobc Coil weight max. 1,250 kg Expansion range approx. 380 to 430 mm Coil outside diameter max. 1,300 mm Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar gulungan: 1.250 mm, Lebar material: 1250 mm Berat gulungan: 5 ton Ibjdpfx Adswur Ebjqsc Tebal material: 0,5 – 1,5 mm Diameter dalam gulungan: 490 - 560 mm Jumlah rol pengumpan: 3

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Kohler Straightening Machine 30-400 - Year of manufacture 1980 Number of straightening rollers: 9 pieces Max. strip width: 400 mm Ibodpev Hrltefx Adqjc GSW Decoiler AHM 1500 - Year of manufacture 1999 Both units mounted together on one base frame Further data and photos available on request

Kondisi: baru, Tahun pembuatan: 2025, Bett aus hochfestem Schweißstahl Segmentierte Rauchabsaugung Ibjdpfx Adow A Ik Neqsc Vollautomatisches Einfettungssystem Arbeitsbereich: 6000 × 1500 mm X-Achsen-Verfahrweg: 1520 mm Y-Achsen-Verfahrweg: 6020 mm Z-Achsen-Verfahrweg: 80 mm Maximale kombinierte Positioniergeschwindigkeit: 170 m/min Beschleunigung: 2,8 G Maschinenabmessungen (L × B × H): 14.500 × 2.300 × 2.380 mm Stellfläche: 15.500 × 2.800 mm Eigengewicht: 6.000 kg Vollautomatisches Schneiden, materialschonend, hohe Geschwindigkeit

Kondisi: bekas, Tahun pembuatan: 1976, mat-001 Ijdpfjvzxq Eex Adqsbc

Kondisi: bekas, de Ibsdpfxew Dd Hps Adqsc

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Ibedpfxshigmbs Adqsc Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Abwickelhaspel Max. Bandbreite: 350 mm Spannbereich Coil-Innendurchmesser: mm Ijdpouqm Dnofx Adqjbc Coil-Durchmesser: 1500 mm Traglast: 1.000 kg Richtmaschine Bandbreite: 250 mm Walzendurchmesser: 30 mm Anzahl der Walzen: 21 Stück Arbeitsgeschwindigkeit: 40 m/min Max. Materialdicke: 6 mm bei 240 N/mm² Max. Materialdicke: 5 mm bei 400 N/mm² Abmessungen: Länge: 3.200 mm Breite: 2.000 mm Höhe: 2.100 mm

Tahun pembuatan: 2023, Kondisi: baru, Funktionen der FORSTNER COMPACT Längsteilanlagen: - Richten (Walzendurchmesser 70 mm) Iodpfsiy N I Ijx Adqebc - Schneiden/Längsteilen (maximal 7 Längsteilmesser) - Querschneiden (Guillotine oder Rollenschere) Verfügbare Coilbreite: 1.250 mm oder 1.500 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter luar koil: 1.500 mm, diameter dalam kumparan: 508 mm, tinggi produk (maks.): 200 mm, panjang pemakanan sumbu X: 1.520 mm, panjang umpan sumbu Y: 3.020 mm, panjang umpan sumbu Z: 80 mm, masa garansi: 24 bulan, tinggi total: 2.380 mm, panjang total: 8.900 mm, lebar total: 2.300 mm, kapasitas angkut: 1.300 kg, frekuensi input: 50 Hz, tegangan masuk: 380 V, berat keseluruhan: 180 kg, akurasi pengulangan: 0,02 mm, berat benda kerja (maks.): 15.000 kg, Perlengkapan: unit pendingin, Die GS-J-Serie bietet verschiedene Tischgrößen wie 3015, 4015, 4020 und 6015, um unterschiedlichen Bearbeitungsanforderungen gerecht zu werden. Geeignet für die Serienbearbeitung von Dünnblechen mit hohen Ebenheitsanforderungen von 0,6–3,0 mm. Abwickelmaschinen-Parameter: Maximales Coilgewicht (kg): 15.000 Coilbreite (mm): 200–1524 Außendurchmesser Coil (mm): Φ800–Φ1500 Innendurchmesser Coil (mm): Φ508–Φ610 (mit Gusseisenauflage) Coildicke: – 0,6–2,0 mm (Edelstahl) ≤1524 mm – 0,8–3,0 mm (Kohlenstoffstahl) ≤1524 mm Zuführlänge (mm): 0–Maximalhub der Anlage Abwickelgeschwindigkeit (m/min): 0–15 Verfahrgeschwindigkeit (mm/s): 0–8 Hubgeschwindigkeit (mm/s): 3,0 Hubweg (mm): 350 Planheitsgenauigkeit (mm/m²): ≤±3 Ibodpjv Awgusfx Adqjc Zuführlinienhöhe fest (mm): 870 Längenmessgenauigkeit (mm/m): Längsrichtung ≤±0,2 Diagonalrichtung: ≤±0,8 Revolutionieren Sie Ihre Coil-Verarbeitung mit einer Maschine, fünf Funktionen! Abwickeln, Richten, Zuführen, Schneiden und Ablängen – alles in einem vollautomatisierten System für maximale Effizienz. Intelligent, flexibel & vielseitig – Schneidet mühelos auch Sonderkonturen und erfüllt verschiedenste Produktionsanforderungen – Optional mit Touchscreen-Bedienung und international führenden Schneidsystemen – Hochwertige Energiekettenkabel – langlebig, biegefest und störungsfrei

Kondisi: bekas, Tahun pembuatan: 1998, Material width: 100 - 450 mm Material thickness: 1.0 - 14.0 mm Coil weight: 10.0 t Coil inner diameter: 470 - 520 mm Coil outer diameter: 1100 - 2000 mm Number of straightening rollers: 12 Straightening roller diameter: 2x70 / 2x96 / 8x127 mm Number of feed rollers: 2 Feed roller diameter: 160 mm Minimum material width: 100 mm Speed: 15 m/min Drive power: 75.0 kW Decoiler weight: 6.4 t Straightener weight: 12.8 t Space requirement decoiler (W x D x H): 3.1 x 1.4 x 3.7 m Space requirement straightener (W x D x H): 2.5 x 3.4 x 2.7 m Straightening Machine RMS Vario-12-70/96/127-450 with infinitely adjustable drive, driven straightening rollers, support rollers, upper straightening beam can be lifted hydraulically, hydraulic entry wedge, hydraulically extendable peeling wedge Decoiler HES 12-650 Isdpfx Adevuugieqebc with infinitely adjustable feed drive, pneumatic overrun brake, hydraulic presser roller (motor-driven), hydraulic central expansion hydraulic loading carriage hydraulically operated loop bridge Loop control by ultrasonic sensor Hydraulic cropping shear HSO 150-0450 Material flow direction: left to right As is/where is, not commissioned - video from the owner before dismantling available

Kondisi: belum diuji (bekas), Tahun pembuatan: 2001, tinggi produk (maks.): 6 mm, Parts of the machine line Manufacturer: EBU BURKHARDT Year of manufacture: 2001 1. Recoiler Load capacity: 7,500 kg Maximum sheet width: 800 mm 2. Leveling machine Maximum plate width: 800 mm Maximum plate thickness: 6 mm Iedpfot U Iy Sex Adqebc

Kondisi: baru, Tahun pembuatan: 2023, jumlah rol pelurus: 9, berat gulungan: 20.000 kg, diameter luar koil: 2.000 mm, diameter dalam kumparan: 508 mm, diameter rol: 126 mm, tinggi produk (maks.): 12 mm, jumlah rol pemakan: 2, diameter rol pengumpan: 126 mm, diameter rol pelurus: 84 mm, ketebalan pelat baja (maks.): 12 mm, tebal plat aluminium (maks.): 12 mm, lebar gulungan: 2.000 mm, panjang total: 6.000 mm, ketebalan pelat tembaga (maks.): 12 mm, ketebalan lembaran (maks.): 12 mm, kapasitas angkut: 30.000 kg, ketebalan lembaran kuningan (maks.): 12 mm, diameter dalam: 508 mm, tegangan masuk: 380 V, daya: 0,006 kW (0,01 hp), tinggi kerja pengumpan: 1.200 mm, Perlengkapan: 4-dalam-1 sekop, Abwickeln, Richten und Zuführen von Coils an Pressen Coil-Zuführanlagen sind ausgelegt für Bandbreiten von 30 mm bis 2.000 mm, Banddicken von 0,1 mm bis 12 mm und Coilgewichte von 750 kg bis 20.000 kg. Automatisierte Linie, berührungsloser Betrieb Automatisches Zuführen Hochpräzises Richten und Egalisieren Empfindliche, präzise Zuführung Verarbeitung von Edelstahl, Aluminium, Kupfer, Messing, Kohlenstoffstählen Abwickeln und Laden der Coils Arbeitsgeschwindigkeit 10 - 120 Meter/Minute Servoantrieb – Trigger / Getriebeantrieb Getriebeübertragungssystem Ibsdpfxjh Dzg He Adqec Abstandserkennung per Lasersensor Werkzeugspeicher – 250 Optionen speicherbar Mehrstufiges Zuführen durch Ein-/Ausgangskommunikation mit der Presse Mehrere externe Ausgangsoptionen Pressen-Automationssystem Automatische Anpassung der Zuführhöhe

Kondisi: bekas, Tahun pembuatan: 1990, en-GB-01 Ijdpfovuuduox Adqsbc

Kondisi: bekas, Tahun pembuatan: 1984, 1 Ibjdpfx Aevuk Icedqsc

Kondisi: bekas, Tahun pembuatan: 1971, mat_desc_180mm Isdpfjvuk H Sox Adqsbc

Kondisi: bekas, Tahun pembuatan: 2004, Material width: 250 mm Coil weight: 2 x 3.0 t Material thickness: 1.5 - 6.0 mm Coil inner diameter: 470 - 530 mm Coil outer diameter: 1800 mm Material cross-section: 6.0 mm² (for BB100) / 3.8 mm² Number of straightening rollers: 21 Ibedpfjvut Ulsx Adqjc Straightening roller diameter: 30 mm Number of feed rollers: 4 Speed: up to 20 m/min Drive power: 18.0 kW Weight: 4.2 t Space required (W x D x H): 2.4 x 2.7 x 2.6 m Weight: 2.40 kg Space required (W x D x H): 2.0 x 2.1 x 2.2 m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central expansion, automatic re-expansion, hydraulic pressing device, hydraulic swiveling Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual roller adjustment, quick-change device for the straightening rollers Loop control via ultrasonic sensor

Kondisi: bekas, Tahun pembuatan: 2000, Material width 600 mm Coil weight 5.0 t Material thickness 0.5 - 5.0 mm Coil inner diameter 360 - 660 mm Coil outer diameter 1500 mm Number of straightening rollers 9 Straightening roller diameter 80 mm Number of feed rollers 2 Material cross-section 1500 mm² Material thickness at 600 mm width 2.5 mm Material thickness at 300 mm width 5.0 mm Drive power 15.0 kW Weight of feeder-straightener 2.5 t Weight of decoiler 1.6 t Space requirements for the feeder-straightener 1.7 x 1.7 x 2.6 m Space requirements for the decoiler 1.8 x 2.0 x 2.3 m Iedpovut S Rjfx Adqjbc Feeder-Straightener VCRL 650, year 1994, general overhaul 2001 with infinitely variable drive, motorized height adjustment, hydraulic alligator opening, pneumatic intermediate ventilation Decoiler SM 5000, year 2000 with auxiliary drive, hydraulic expansion, hydraulic pressure device, band loop control via contact plate as is, without commissioning Price for commissioning (in current condition) on request

Kondisi: bekas, Tahun pembuatan: 1994, materialbreite-650-mm-technische-daten Iodpfx Adevut Sdsqebc

Kondisi: bekas, Tahun pembuatan: 1996, Material width 500 mm Coil weight 2.5 t Material thickness 0.2 - 3.0 mm Coil inner diameter 480 - 530 mm Coil outer diameter 1300 mm Material cross-section 1000 mm² Number of straightening rollers 10 Straightening roller diameter 80 mm Number of feed rollers 2 Roller diameter 120 mm Speed 20 m/min Drive power 4.0 + 1.1 kW Weight of straightening machine 2.3 t Space requirements for straightening machine (W x D x H) 1.4 x 2.2 x 2.0 m Weight of decoiler 0.95 t Space requirements for decoiler (W x D x H) 1.5 x 1.5 x 1.95 m Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor with constant speed, disengageable auxiliary drive, pneumatic pressure device Loop control via light barrier Can be offered either without commissioning or commissioned in current condition Video available from seller prior to disassembly Ibjdjvut Raspfx Adqjc

Kondisi: bekas, Tahun pembuatan: 1985, Material width: 500 mm Coil weight: 1.0 t Ibjdsvut Hzopfx Adqoc Material thickness: 0.4 - 5.0 mm Coil inner diameter: 420 - 520 mm Coil outer diameter: 1200 mm Material cross-section: 1500 mm² Number of straightening rollers: 9 Number of feed rollers: 2 Speed: 0 - 80 m/min Weight: 1.70 t Dimensions (LxWxH): 2.7 x 1.3 x 1.9 m Weight: 1.35 t Dimensions: 2.2 x 1.2 x 2.0 m Straightening machine with infinitely variable drive control, intermediate ventilation of feed rollers, hydraulic feed assistance Decoiler with auxiliary drive, hydraulic central expansion, pressure device

Kondisi: bekas, Tahun pembuatan: 1994, Material width 500 mm Coil weight 3.0 t Material thickness 0.2 – 2.5 mm Coil inner diameter 470 – 530 mm Coil outer diameter 1400 mm Number of straightening rollers 9 Straightening roller diameter 40 mm Number of entry and exit rollers 4 Material cross-section 1200 mm² Speed 1.5 – 30 m/min Required space decoiler (WxDxH) 1.9 x 0.6 x 1.7 m Weight of decoiler 1.1 t Required space straightening machine (WxDxH) 3.3 x 1.3 x 2.7 m Weight of straightening machine 3.0 t - Straightening machine RYD 40 x 500 with steplessly adjustable drive (lower straightening rollers driven), straightening rollers individually adjustable by motor, support rollers, outfeed roller basket - Decoiler DY 500 x 3000 Ibedpjvut Eqofx Adqec with hydraulic auxiliary drive, pneumatic overrun brake, hydraulic central expansion, hydraulic pressure device, hydraulic feeding aid, hydraulic loading saddle - Loop control system Can be offered either as-is or in operational condition

Kondisi: bekas, Tahun pembuatan: 1971, de-hu-001 Ibsdpfx Adevut Dtsqec