Beli Ekstruder dan lini ekstrusi bekas (226)

Tahun pembuatan: 2025, Kondisi: baru, Our compact extruder model EX30-28d is designed to be used in all extrusion processes. Iisdpfxoby Rfps Aahek We offer this extruder both as a co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, tubes, or for granulation with hot die-face or strand pelletizers. Other machine sizes are also available on request—please contact us. Our standard extruder with a nitrided screw and barrel is suitable for processing most polymer raw materials. Optionally, we also offer this extruder with a wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, fiber-reinforced plastics, etc.

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran),

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD – THREE-LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for producing pipes with diameters of 250 mm, 315 mm, and 400 mm The pipe head was in operation for approximately 1 year due to business closure. Condition: Not new, but in very good condition Ijdpfjwqgitex Aahjik Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Tahun pembuatan: 2023, Kondisi: baru, Nitrogen generation plants for the production of a wide range of purities, pressures, and flow rates. The systems are composed of high-quality components such as filters, adsorbers, and nitrogen separation units from Parker Hannifin, as well as compressors from Kaeser. If you require high-pressure compression, we collaborate with Bauer Kompressoren. To date, more than 400 systems have been installed at our customers’ facilities. Iodenq Di Tjpfx Aahjik All systems are configured and tailored by us to suit your site conditions and specific requirements. We also design and implement containerized plants for both outdoor and indoor installation. We look forward to receiving your inquiries...

Tahun pembuatan: 1993, jam operasional: 281 h, Kondisi: bekas, Fungsionalitas: belum diuji, Extrudex ekstruder sekrup tunggal ED-N45-25D, tahun 1993, kondisi bekas (diremajakan total tahun 2014) Iijdpfxjxw Tumo Aahsk Tipe: ED-N-45-25D Tegangan nominal: 3x400V 50Hz Tegangan kontrol: 230V 50Hz / 24VDC Sekring maksimum: 200A Motor penggerak tahun: 2004 tipe: EFG EF132 M Opsional termasuk: - Haul-off belt - Meja kalibrasi Untuk informasi lebih lanjut silakan hubungi kami. Harga atas permintaan.

Tahun pembuatan: 1993, jam operasional: 2.466 h, Kondisi: baik (bekas), nomor mesin/kendaraan: 330,2135,01, Brand: Leistritz AG Model: Micro 27/40 D Screw type: Twin-screw Year of manufacture: 1993 Screw diameter: 27 mm L/D ratio: 40 Iedpfx Aaeu Aqdkshjik Operating hours: 2,466

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3.04-00054, Perlengkapan: Pelat tipe tersedia, Used Bellaform Extruder BH45-30D with barrier screw and mixing section. 45 mm extruder with 30 L/D screw length. The extruder is equipped with a new control system. Fully operational. Multiple extruders of the same type available! Ijdpfx Aasuxa Abjhoik

Kondisi: baik (bekas), Ekstruder untuk produksi pipa plastik Isdpfxjxcwxys Aahsik Mesin dapat diperiksa dengan janji terlebih dahulu! Video tentang cara kerja dapat dilihat di situs produsen!

Tahun pembuatan: 2023, Kondisi: baru, Lini ekstrusi Coperion ZSK 27 MV Plus Aplikasi: Farmasi batang gigi Tahun: 2023 belum pernah digunakan, masih dalam kemasan asli Ijdpoxr Hgxefx Aahjik

Kondisi: bekas, - Lini ekstrusi film tiup 3 lapis pada platform berputar - Perubahan dan penyesuaian terkait produk memungkinkan (dikenakan biaya) - Sekrup cadangan, silinder cadangan, dan berbagai suku cadang tersedia tambahan untuk lini ini Iiodpjxq Hcdsfx Aahok Dasar pengiriman: dari lokasi Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% di muka sebelum pengambilan mesin, bersih

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Iijdpfeu Ttf Nsx Aahek Net weight: 1150 kg Flat die: Films up to max. 330 mm width Calender Roller width (gross): 1200 mm Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Tahun pembuatan: 2005, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Parallel twin-screw extruder WEBER DS 8.5 - Manufacturer: WEBER - Model: DS 8.5 - Year of manufacture: 2005 - Parallel twin screws ø85mm 17 L/D - 5 heating zones on the barrel + 2 cooling zones - 5 die heating zones - Motor power: 56 kW - Up to 150 kg/h for profiles – 230 kg/h for pipes Very good condition Isdpfxjuziyhs Aaheik

Tahun pembuatan: 2022, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, - Mill for e.g. lumps Isdpfxsp E Anvs Aaheik - New / Unused machine - Open rotor - Grinding chamber 650 mm x 550 mm - Control unit Spare parts can be supplied (screen, knives, etc.).

Kondisi: baik (bekas), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina výroby: Západné Nemecko (Kelberg / Eifel) Typ: jednozávitovkový plastový extrudér Dokumentácia: Súčasťou dodávky (pôvodný nemecký manuál a korešpondencia z roku 1987) Stav: Použitý, ale kompletný a funkčný Miesto uloženia: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer závitovky: 30 mm Iedpfxsxu E E Sj Aahjik L/D pomer: 25 D Hlavný motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot/min) Napájanie: 3 × 380–420 V / 50 Hz Riadiace napätie: 220 V Chladenie: Vzduchom chladený valec s vykurovacími zónami Riadiaca skriňa: Súčasťou dodávky, vrátane relé, ističov a analógových meradiel Popis: Kompaktný, jednozávitovkový laboratórny alebo malosériový extrudér od spoločnosti Plastik-Maschinenbau GmbH vyrobený v Západnom Nemecku. Určený na spracovanie termoplastických materiálov, testovanie materiálov alebo pre menšie extrúzne linky (napr. výroba hadičiek, profilov alebo na poťahovanie). Obsahuje originálny elektrický rozvádzač, manometer a kompletnú dokumentáciu. Po mechanickej aj elektrickej stránke je kompletný, vyžaduje už len štandardné uvedenie do prevádzky.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 39.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, A used and fully functional profile extrusion line, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hrs Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely variable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Barrel heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control system: conventional control with digital temperature controllers Degassing: rotary vane vacuum pump Busch (1.5 kW) Maximum output rate: 120-150 kg/h for rigid PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: melt temperature sensor and melt pressure sensor Adapter between extruder connection and extrusion tool Used tooling kit for a window profile (re-extension), consisting of: Iedpsxu U Trefx Aahjik - Extrusion die "re-extension", incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 inserts for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 units, Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 units, Calpeda (each 1.1 kW) Belt haul-off, incl. integrated saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Belt width: 250 mm Max. pulling force: approx. 25,000 N Speed range: up to approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1/10/2025, tinggi kabinet kontrol: 1.000 mm, pl-hu-001 Iiedjxtf Hgepfx Aahek

Tahun pembuatan: 2009, Kondisi: sangat baik (bekas), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering of PVC, PE, PP PIPES With chip extraction fan Min. diameter: 40 mm Max. diameter: 400 mm Year of manufacture: 2009 Accessories: Various clamping jaws Machine location: Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Iijdpfx Aevbvznjahjk The machine is my property.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Manufacturer: IDE Model: 45/4 Isdpfx Aasuhpiyohsik Year of manufacture: 2001 Single screw extruder Ø45mm, 25 L/D Analog control panel on right side Screw profile: PVC 4 heating zones on barrel 4 heating zones on tooling Motor power: 8.5 kW Throughput: up to 60 kg/h Good overall condition, very clean machine.

Kondisi: sangat baik (bekas), Granulasi eksentrik EGR digunakan dalam produksi plastik yang peka terhadap suhu dan geseran. EGR dirancang khusus untuk penggranulan PVC lunak, PVC keras, formulasi HFFR, atau senyawa untuk kabel tegangan rendah, menengah, dan tinggi berbasis elastomer. Ijdpfx Aaew Iu T Tsheik

Kondisi: bekas, diameter sekrup: 35 mm, Na predaj: SJ35 jednozávitovkový extrudér na plasty, výrobca Zhang Jia Gang Friend Machinery Co., Ltd. Kompaktná a spoľahlivá extrúzna jednotka vhodná pre malovýrobu až stredné výrobné objemy – ideálna na laboratórne testovanie alebo extrúziu plastových rúr, profilov alebo vlákien. Stroj je plne funkčný, pravidelne udržiavaný a k dispozícii na okamžitú obhliadku. Technické špecifikácie Model: SJ35 Výrobca: Zhang Jia Gang Friend Machinery Co., Ltd. (Čína) Priemer závitovky: Ø35 mm Pomer L/D: 35:28 Výkon hlavného motora: 7,5 kW Stredová výška: 1000 mm Reduktor: ZLYJ112 (pomer 16:1, 2017) Vyhrievacie zóny: viac samostatne riadených zón Pohon: frekvenčný menič ABB Súčasťou balenia je sušič násypky a podávač Elektrické napájanie: 400 V / 3 fázy / 50 Hz Stav: plne funkčný a otestovaný Stav zariadenia Vo veľmi dobrom technickom a vizuálnom stave Vybavené digitálnymi regulátormi teploty a riadením otáčok hlavného motora Obsahuje kompletný elektrický rozvádzač s frekvenčným meničom ABB a elektroinštaláciou Pravidelne servisovaný, žiadne chýbajúce komponenty K dispozícii na obhliadku a testovanie v Ivanke pri Nitre Cena Iedpfx Aoxuczqsaheik 5 000 € (dohodou) EXW Ivanka pri Nitre Vhodné pre Plastovú extrúziu malých profilov, trubiek a vlákien Laboratórne testovanie a vývoj materiálov Vzdelávacie či pilotné výrobné prevádzky

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), 1 Iiodpsxq Exqsfx Aahok

Kondisi: bekas, Twin-screw extruder Manufacturer: COPERION (Werner & Pfleiderer) Gearbox manufacturer: P.I.V Type: ZSK 170 W 1920/1750 Year of manufacture: 2021 / 2002 / 1986 Screw diameter: 172 mm Screw speed: 4.9 – 49 rpm Max. torque: 17,500 Nm Main drive: 216 kW Over the past 3 years, more than €420,000 has been invested in new components and factory overhauls (some parts remain unused). The extruder was in operation until August 2023 and has already been dismantled for transport. Some components are available redundantly and originate from the years 1986 to 2021. Scope of delivery includes: Coperion DSE 180 twin-screw degassing unit: - 1 x year 2021 (€180,000) Main gearbox P.I.V: - 1 x year 2002, factory-overhauled (€233,000) in 2021, unused - 1 x year 1986, factory-overhauled in 2016, used from 2021–2023 Main drive motors Siemens, 212kW, 460V: - 1 x year 2002, factory-overhauled (€8,000) in 2020, unused - 1 x year 1986, factory-overhauled in 2015, used from 2020–2023 Screw barrels: - 16 various, new and used, with and without openings Screw shafts: - 2 x approx. 4,600 mm Miscellaneous: - Supports - Screw tips - Thrust discs Iiodpfx Asxqg Tcoahjk - etc. Sale does not include electrical and control systems and does not include screw segments. Further technical details and data sheets available upon request or see photos/PDFs.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, diameter sekrup: 85 mm, Complete extrusion line. Individual components can also be offered upon request. The line has been used for the production of pipes made from PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws replaced in 2019) Iiodpfou Rda Iex Aahjk - Side feeder - Complete control system for dosing units and extruder - Single oil temperature control unit - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250-4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Tahun pembuatan: 2006, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Starlinger Extruder Iijdpfshgq Ahox Aahsk - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die For technical data, see photos. Optional with water bath & strand pelletizer, etc. If you have any further questions, we are always available. Commissioning and testing can be arranged upon request. Available for immediate delivery.

Tahun pembuatan: 2020, Kondisi: baru, Dispenser for granulate and powder Iiodpfx Aasfmn Ufehsk - Material: stainless steel