Beli Ekstruder dan lini ekstrusi bekas (211)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 39.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, A used and fully functional profiling line for rigid PVC profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Model: DS 7.22 Year of manufacture: 1995 Serial number: DS70-043 Operating hours: 39,000 h Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely variable Drive motor: DC low-voltage motor, thyristor controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control system: conventional with digital temperature controllers Degassing: rotary vane vacuum pump Busch (1.5 kW) Max. output: 120–150 kg/h with rigid PVC, depending on material Connected load: approx. 50 kW (without tooling) Special accessories: melt temperature and melt pressure sensor Adapter between extruder outlet and extrusion die Used tooling set for a window profile (extension), consisting of: - Extrusion die “extension”, incl. heating bands - Dry calibrator - Vacuum tank approx. 2 m long, with 8 holders for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Model: CAL VAK 4P Year of manufacture: 1992 Serial number: K9209590 Total length: 6,500 mm Kledpfx Aeyx Dwkocgsw Vacuum pumps: 4 units Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 units Calpeda (each 1.1 kW) Caterpillar take-off, incl. integrated saw Manufacturer: Uniplast / Greiner Model: CAT PUL 2D Year of manufacture: 1992 Serial number: R 9204546 Take-off: Effective contact length: 2,000 mm Pad width: 250 mm Max. pulling force: approx. 25,000 N Speed range: up to approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tilting table Manufacturer: Ide Model: ME N 52/2 Year of manufacture: 1994 Length: 6,000 mm Support width: 270 mm Note: The complete line was overhauled in 2020 and has been in operation for only 325 hours since.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, 2 unit GERGAJI PIPA HEIN 160 Tahun pembuatan: 1995 dan 1996 Dengan rahang pengikat serutan Aplikasi: pemotongan dan chamfering Diameter terkecil: 30 mm Diameter terbesar: 160 mm Untuk pipa PE, PP, dan PVC Juga cocok untuk panjang pendek mulai dari 10 mm Kondisi: Sangat baik, gergaji siap digunakan Gergaji milik pribadi saya Lokasi: Sachal Extrusionsmaschinen, Bahnhofstr. 6 Klsdpfsyxqlnox Acgjw D-26345 Bockhorn-Grabstede, Jerman

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Dibuat oleh Euro-Stel, Belgia Kodpfxswivdks Acgjlw Tahun Pembuatan 2013 Ekstruder: diameter 75x28 D - dengan neck sweder dan hopper granulat Mould tidak termasuk KONDISI SANGAT BAIK

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, 3 unit mesin pemotong pipa ROHRSÄGEN HEIN TVP 160 tersedia di stok Tahun pembuatan: 1995 Dilengkapi rahang penahan serpihan Aplikasi: Pemotongan dan chamfering pipa PE, PP, dan PVC: Diameter terkecil: 30 mm Diameter terbesar: 160 mm Juga cocok untuk pemotongan pendek mulai dari panjang 10 cm Ksdpfxevwm N Ue Acgjlw Kondisi: mesin pemotong pipa siap pakai Mesin ini adalah milik saya pribadi Lokasi: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Jerman

Kondisi: baik (bekas), SEKRUP GANDA untuk EKSTRUDER WEBER DS105.17D Aplikasi: PIPA PVC Nomor sekrup: 014.185605 r.920 S Kjdsywr Tdepfx Acgslw

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, warna: hijau, The calendar consists of the following assemblies: - Roller assembly: 4 rollers - Roller drive assembly - Frames - Travel system - Control cabinet The roller assembly comprises 4 rollers of different diameters. The rollers are mounted on a common frame allowing adjustment of their relative positions (gap adjustment between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven via worm gears type MRA-63. The gap between rollers 2 and 3 is adjusted manually using adjustment screws. Each roller is individually driven, allowing for independent speed adjustment. Roller speed and sheet thickness settings are controlled via the operator panel on the calendar’s control cabinet. Kodpowcxufjfx Acgslw Above the final roller (No. 4), there is a pressure roller and circular knives for trimming the sheet edges. The spacing of the knives is adjustable, enabling the production of sheets in different widths. Roller diameters: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Circular knife 6 – 200.00 mm - Roller width: 230 cm - Working width of rollers: 210 cm - Total width: 300 cm - Height: 250 cm - Distance to extruder (calendar-extruder): 70 cm - Total length with approach: 350 cm Power supply: - 3 x 400 V (32A) - Motors: 4 x 0.75 kW - Fans: 2 x 0.25 kW - Pumps: 2 x 1.1 kW - Travel motors: 2 x 0.25 kW - Central pump: 1 x 0.5 kW - Roller pressure motors: 2 x 0.25 kW - Circular knife motors: 2 x 0.15 kW

Kondisi: baik (bekas), Tahun pembuatan: 1994, Model: NE 12 Tipe Sekrup: Sekrup tunggal Tahun pembuatan: 1994 Diameter sekrup: 130 mm Rasio L/D: 30 L/D Kedpfx Acjyxpbuegolw Daya penggerak: 350 kW Termasuk: • Mesin masih beroperasi saat dibongkar • Mesin memproduksi pipa 710 mm • Output pada HDPE sekitar 1.000 kg/jam • Kepala ekstrusi 800 mm

Tahun pembuatan: 2013, Kondisi: baik (bekas), Merek: Krauss Maffei Technologies GmbH Model: KME 38-30 Tipe sekrup: Sekrup tunggal Tahun pembuatan: 2013 Diameter sekrup: 38 mm Rasio L/D: 30 Ksdpfoyxn U Tex Acgolw

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), graewe-sandern-2-kamrás-víz-alatti-vákuum-kalibrálótartály-v-32- 2-3-3-méter-hosszú-maximális-átmérő-63-mm-2-kamrás-tartály-2-db-b ypass-szűrővel-gyártási-év-2004-permetezés-nélkül-teljes-fürdős-k alibrálótartály-elektromos-előtolás-előre-és-hátra Kodeyc E Nnepfx Acgolw

Tahun pembuatan: 2000, Kondisi: bekas, Allgemeine technische Beschreibung: Die Macchi 3-Layers ist eine dreischichtige Blasfolien-Coextrusionsanlage, die für die Herstellung hochwertiger Schlauch- und Flachfolien konzipiert ist. Die Anlage kann LLDPE, LDPE, mLLDPE, MDPE und HDPE verarbeiten. Die Folienproduktion erfolgt nach dem aufwärts gerichteten Blasenverfahren (Upward Bubble-up). Die Maschine ist mit einem 3-Schicht-Werkzeugkopf mit 350 mm Durchmesser ausgestattet und erreicht eine Ausstoßleistung von bis zu 450 kg/h. EXTRUSIONSGRUPPE: Extruder: 65 mm + 80 mm + 65 mm Infrarot-Heizzonen Hydraulische Siebwechsler Die Coexflex-Extrusionsgruppe Größe 3 umfasst: • Zwei Hochleistungsextruder 65/30D (Schichten A und C) • Einen Hochleistungsextruder 80/30D (Schicht B) • Bimetallzylinder • Nitrierte, hochmischende Schnecken • Wasserkühlte, genutete Einzugsbereiche • AC-Motoren mit digitalen Frequenzumrichtern (74 kW für 65 mm, 100 kW für 80 mm) WERKZEUGKOPF: • Modell TE502 • Durchmesser 350 mm, Düsenöffnung 1,8 mm • IBC (Internal Bubble Cooling) • Chemisch vernickelte Materialkanäle • 4+4 Keramik-Heizzonen • Montiert auf einem Werkzeugwagen mit integriertem Luftverteilungsverteiler KÜHLSYSTEM: • Doppel-Lippen Plast-Control Luftkühlringe • Coexflex-Version mit Double Flux Kühlring ASR3, frequenzgeregeltem Gebläse und austauschbaren Einsätzen ABZUGSEINHEIT: • Abzugsbreite: 1800 mm • Oszillierende Abzugwalzen • Seiteneinfaltungseinrichtung WICKELBEREICH: • Doppelter, vollautomatischer Gegenwickler • Vollautomatischer Rollenwechsel • Maximale Wickelbreite: 1750 mm • Papphülsendurchmesser: 76 mm FOLIENSPEZIFIKATIONEN: Erzielbare Folienbreiten mit 350–400 mm Düse: 1300–1700 mm Stärkenbereich: 18–200 μm Beispiel für Ausstoß bei Coexflex-Ausstattung: 1600 mm Breite, 100 μm LDPE → 400 kg/h ANLAGENSPEZIFIKATIONEN: Gesamthöhe der Linie: 10 m Mechanische Wickelgeschwindigkeit: 7–110 m/min Installierte elektrische Leistung: 320 kW, 415 V, 3-phasig + Neutralleiter Kühlwasserverbrauch: 6 l/min Klodoyt Ikvjpfx Acgjw Druckluftbedarf: 6 bar ZUSATZAUSSTATTUNG: • Turm • E+L Bahnlaufregelung • Piovan gravimetrische Wägedosierung • Piovan Quantum Dosiergeräte • Plastic-Control automatische Dickenregelung • Kalibrierkorb • Corona-Vorbehandlung (Ferrarini & Benelli) • FBF Kalt-Nadel-Mikroperforation • Luftwellenschäfte (8 Stück)

Tahun pembuatan: 2009, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: P251001170, pl-hu-001 Kjdpfxexiu Npo Acgolw

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Screw diameter: 59 mm, screw speed: 25–250 rpm, complete with full documentation, control cabinet, screen changer, side feeder, granulator, and additional accessories. Kledpfx Ashtvmhecgew

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Throughput capacity: 140–180 kg/h, screw diameter: 50–103 mm, screw length: 1300 mm, max. screw speed: 43 rpm, connected load: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, cylinder cooling unit, and screw temperature control. Kljdpfehz Dyajx Acgjw

Tahun pembuatan: 2006, Kondisi: baik (bekas), de2hu-01 Ksdjpaiaijpfx Acgslw

Tahun pembuatan: 2011, Kondisi: baik (bekas), The extrusion line No. 1 was designed for the production of cast film. Processing of thermoplastics within a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - Monolayer film - 3-layer (A-B+C-A) - 5-layer (A-B-C-B-A) LINE DATA: Maximum total extruder output: 2230 kg/h Extruder A: 90/33 L/D, max. 330 kg/h Extruder B: 135/33 L/D, max. 950 kg/h Extruder C: 135/33 L/D, max. 950 kg/h Net film width range: 1600 - 2110 mm Two-roll slitting possible (2x 800 - 2x 1055 mm) Thickness range: 25-580 μm Production speed: 10 - 150 m/min Roll width: 2500 mm Max. roll weight: 2000 kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness measurement system for automated cross-web (TD) profile measurement with dual-side Corona treatment (max. 12,000W) Ksdspah U Tepfx Acgslw Optical inspection system, including marking system for defect detection, transmitted and incident light system INFRASTRUCTURE (ADDITIONAL UNITS): Dryers 1-4 each with 4500-liter volume; heating capacity 48 kW Dryer 5 with 2500-liter volume; heating capacity 20 kW Dryer 6 with 1500-liter volume; heating capacity 15 kW Each extruder equipped with gravimetric batch dosing system (3 stations) Each extruder equipped with melt pump and 2-piston screen changer system MAIN COMPONENT MANUFACTURERS: SML: Extruders; frame, rollers, winding unit GWK: Cooling extruder KREYENBORG: Screen changer Cloeren: Feedblock, wide slot die PIOVAN: Dryers, dosing system SERVE: Edge trim cutting device MATHO: Extraction system RAPID: Edge trim granulator KONGSHILDE: Edge trim handling, start-up rollers INFSTAUB: Bagging station SMK: Chillers SIEMENS: Control system OCS: Camera system SEMET: Labeling system AFS: Corona station BETA CONTROLL: Radiometric thickness measurement SML: Automatic flying splice winding unit, BECKOFF control SIMCO: Antistatic equipment ALTEK: Automatic roll manipulator (transfer cart)

Kondisi: bekas, Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, BARMAG extrusion line consisting of: 1x Extruder BARMAG BA KEP 90-26.3-S 1x BARMAG Gearbox 9E4-11-103/Z 1x Drive Motor AEG G 16.04 with forced ventilation, 460V, 112A, 46.7kW, 3150rpm, excitation 330V, 2.21A 1x Metering Unit SCHOLZ incl. feed hopper 1x Control Unit Machine features: - Single-screw extruder, year approx. 1970 - Output 200kg/h - Retrofitted with new screw geometry in 2016 - Screw diameter 90mm Kledpfxsuakzzj Acgew - Screw length 2769.5mm - Process length 26.3D - Geometry: intake – barrier – mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation included This system is available 3 times. Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle the system and arrange transport themselves. This is not included in the offer price.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ZSK27mV, The following items and quantities are available for sale: 4x Conveying element 22/11 – 8027-05.21-022/011-24 10x Conveying element 22/22 – 8027-05.21-022/022-24 6x Conveying element 22/33 – 8027-05.21-022/033-24 6x Conveying element 33/16.5 – 8027-05.21-033/00165-24 Kledpfsvytdksx Acgsw 10x Conveying element 33/33 – 8027-05.21-033/033-24 10x Conveying element 44/22 – 8027-05.21-044/022-24 10x Conveying element 55/27.5 – 8027-05.21-055/027,5-24 10x Kneading element KB30/7/22 SAM – 8027-05.27-307/022-27 12x Kneading element KB30/5/11 – 8027-05.26-305/011-24 12x Kneading element KB30/5/22 – 8027-05.26-305/022-24 6x Mixing element SME 22/22 – 8027-05.92-388/022-64 Material: 1.2379 - X153CrMoV12 (CPPU) Available for immediate delivery.

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Flat die: Films up to max. 330 mm width Calender Roller width (gross): 1200 mm Kledpfx Acju Ttf Njgew Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Tahun pembuatan: 1970, Kondisi: siap digunakan (bekas), extrusion-line-01 Kodpfxow R Dhrs Acgjlw

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Control panel: Siemens SIMATIC HMI, connected load: 80 kW, weight: 1.85 t, operating hours: approx. 4,500 h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Complete documentation is available, on-site inspection possible. Kodpfjv Uz Awex Acgelw

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), 1 Kodpfx Acexq Exqogelw

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), A complete Artec recycling and extrusion plant is available. Materials: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145 mm, L/D ratio: 42, extrusion output: 700 kg/h, degassing: double vented, drive power shredder/extruder/screen changer: 55 kW/609 kW/55 kW. Overall plant dimensions (L/W/H): approx. 20,700 mm/3,000 mm/3,400 mm. Control system: Siemens. Includes shredder, conveyor units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot-cut pelletizer, bag filling and weighing station, and bagging station. Documentation is available. On-site inspection is possible. Kljdpfjv Ip S Hsx Acgjw

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), A total of three extruders are available, including throughput measurement units (scales), almost new cylinders (2018), and refurbished screws. Total extrusion capacity: approx. 100 kg/h. 1) DC smooth barrel extruder, motor power: 17 kW, machine dimensions (L/W/H): approx. 2300 mm / 600 mm / 1100 mm. 2) DC smooth barrel extruder, motor power: 32 kW, machine dimensions (L/W/H): approx. 3000 mm / 700 mm / 1200 mm. 3) DC grooved barrel extruder, motor power: 49 kW, machine dimensions (L/W/H): approx. 3000 mm / 700 mm / 1200 mm. An on-site inspection is possible. Ksdpjvw Aqhefx Acgjlw

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A complete Artec recycling and extrusion line is available. Suitable materials: PE/PP/PS/ABS/LDPE/HDPE/MDPE. Screw diameter: 125 mm, L/D ratio: 42, extrusion output: 650 kg/h, degassing: double venting, drive power for shredder/extruder/screen changer: 55 kW/512 kW/55 kW. Total system dimensions L/W/H: approx. 20,700 mm/3,000 mm/3,400 mm. Control system: Siemens. Includes shredder, conveyor units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot die-face pelletizer, bag filling and weighing station, and bagging station. Documentation available. On-site inspection possible. The system has extensively documented faults. Ksdpfx Acjv Ip Syegjlw

Tahun pembuatan: 1982, Kondisi: siap digunakan (bekas), de-1 Klodpfx Aox Hifvecgew