Schreinerei und Küchenwerkstatt

Kondisi: bekas, Tahun pembuatan: 2024, Exhibition machine Garbsen – new, complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted design - Lamella press beam at the TOP with 6 elements, lamella press beam on the SIDE with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) consist of 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromechanical adjustment of both press beams via precision trapezoidal screw spindles (with increased thread pitch and concentricity accuracy), and high-performance lead nuts with grease reservoir - Pressing occurs electromechanically, via 2 separate helical geared motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and regulated by frequency converters, providing completely wear-free press force control Itjdpfexy Tl Djx Aahor - Pressing force for horizontal press beam: min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press beam: min. 300 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, adjustable by 3-stage selector switch 5 / 10 / 25 mm/sec - Extremely easy operation via 6 individual push buttons, 8 movement sequences selectable via control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories Machine feet Surcharge for rapid traverse positioning per piece, for fast positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts Set of machine feet for working height 500 mm per piece Location: Garbsen

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, LAMELLA BODY PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration including: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly clamped carcass joints - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates with a thickness of 38 mm - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance travel nuts with grease reservoir - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and controlled by frequency converters, making the pressing force regulation completely wear-free - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/loading height: 300 mm Itodpoxvitiefx Aahjr - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Completely overhauled by Ganner, 6 months spare parts warranty Location: ex stock 54634 Bitburg - immediately available -

Kondisi: bekas, Tahun pembuatan: 1989, Dimensi kerja 3000 x 1250 x 650 mm Langkah silinder 110 mm Dimensi mesin 3240 x 2120 x 770 mm Itsdoxu Egvopfx Aahsr Berat sekitar 900 kg

Kondisi: bekas, Tahun pembuatan: 1993, bekas, kondisi sangat baik Itodpfxjxuv N Ue Aahsr Merek: Hess Tipe: Express Tahun pembuatan: 1993 No. Mesin: 100914/28 Jumlah silinder per elemen pres: 2 – langkah 110 mm Jumlah elemen pres horizontal: 3 Jumlah elemen pres vertikal: 3 Lebar kerja: 2500 mm Tinggi kerja: 1350 mm Kedalaman pres: 600 mm pneumatis Pengaturan tinggi secara elektrik Kebutuhan ruang sekitar 3600 x 800 x 2450 mm Berat sekitar 1200 kg Lokasi gudang: 97447 Gerolzhofen, bebas bongkar, tanpa kemasan Penyerahan dalam kondisi apa adanya seperti dilihat, tanpa garansi dan jaminan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 941, tinggi kerja: 1.350 mm, lebar kerja: 600 mm, panjang kerja: 2.500 mm, DETAIL TEKNIS Panjang tekan: maks. 2.500 mm Tinggi tekan: maks. 1.350 mm Kedalaman kerja: maks. 600 mm DETAIL MESIN Data listrik Tegangan nominal: 3/N/PE/400 V Arus nominal: 11 A Daya nominal: 4,7 kW Frekuensi: 50 Hz Isdpfxsxnyg Ro Aahjtr PERLENGKAPAN Balok tekan vertikal dan horizontal digerakkan secara elektromekanis Pembentukan tekanan melalui motor gearbox yang dikontrol frekuensi Tekanan tekan vertikal dan horizontal dapat diatur secara terpisah Waktu penekanan dapat diatur

Kondisi: baik (bekas), Tahun pembuatan: 2014, Mesin press badan bekas - GANNOMAT Concept 70 Eco Iodpoxhc T Tefx Aahotr - Tahun pembuatan: 2014 - Tersedia Desember 2025

Kondisi: sangat baik (bekas), hess-korpuspresse-export Itodpfoxgvwpjx Aahor

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LGMATECH KORPUSSPRESSE, Press kerangka dalam kondisi siap pakai langsung. Press dapat dilihat setiap saat dengan janji temu. Isdpexf Dvwjfx Aahjtr

Kondisi: bekas, Tahun pembuatan: 1982, Ukuran press: 3500 x 2600 mm Unit elektrohidrolik untuk 4 pengeboran engsel cawan lengkap, 4 unit bor engsel cawan Pelat sudut kiri atas dengan 2 silinder tekanan melintang 4x penahan kayu hidraulik Sisipan tengah untuk pengepresan kecil dengan unit bor Balok tekanan tengah 2600 mm Silinder tekanan memanjang dengan penahan balik 4x bor engsel cawan Lokasi penyimpanan: di pelanggan Iodexftcaepfx Aahotr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Itjdpfxjw Td A Ie Aahor Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Iedpfx Aasw Tdymohotr - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Penjepit pneumatik untuk furnitur. Dimensi kerja: 3000x1200 mm. Pengangkatan palang atas bermotor. Telah diuji dan berfungsi. Iodpfx Asw S A Erjahotr

Kondisi: baru, Tahun pembuatan: 2025, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process Ijdpfew Sgnkex Aahetr - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: bekas, Tahun pembuatan: 1999, tinggi total: 2.200 mm, panjang total: 5.200 mm, lebar total: 800 mm, de2multi-001 Isdpfx Aaowyn Najhetr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Completely in standard configuration with: - Stable, torsion-resistant steel frame, welded and bolted construction - Side-mounted pressing beam with continuous pressure surface, equipped with a 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, floor) are continuous support plates, 25 mm thick and coated Iedpfxjwx Nfge Aahetr - Electromechanical adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance nuts with grease reservoir - Pressing operation is electromechanically actuated via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely adjustable via potentiometer and controlled by a frequency inverter, providing entirely wear-free press force regulation - Press force for the vertical pressing beam: min. 300 daN (kg) up to steplessly adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - User-friendly operation via 2 separate push-buttons, two movement modes (open/close) selectable via control unit - Freely adjustable pressing time preselection with automatic opening 0–30 min. (switchable to seconds or hours) - Working height/loading height: 200 mm - Working dimensions: Length min.: 150 mm, max.: 1300 mm Height min.: 150 mm, max.: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar perataan: 630 mm, jenis penyesuaian ketinggian: mekanis, berat keseluruhan: 1.100 kg, tinggi penyerutan: 200 mm, lebar kerja: 630 mm, kecepatan rotasi (maks.): 5.500 rpm, Thickness planer Manufacturer: Dornburg Model: DD 63 Heavy-duty thickness planer (cast iron), table length approx. 1050 mm Planing width approx. 630 mm Maximum workpiece height: 200 mm Iedpfowtqzrex Aahotr Cutterhead equipped with 4 strip planing knives Motor output: 5.5 kW Speed: 5,500 rpm Feed rate: 18 m/min Dimensions approx. 1100 x 1300 x 1600 mm (LxWxH) Weight approx. 1,100 kg

Kondisi: sangat baik (bekas), Hydraulic Assembly Press Italpresse Program/30 for Window and Door Joinery The Italpresse Program/30 is a vertical hydraulic press designed for precision assembly and gluing of wooden components such as window frames, door frames, and furniture carcasses. Its robust construction enables accurate fitting and secure bonding of parts, which is essential in the manufacture of joinery and furniture elements. Technical specifications: Itjdpjwkf Stsfx Aahsr • Maximum working dimensions: 3000 × 1700 mm • Vertical cylinder stroke: 800 mm • Horizontal cylinder stroke: 1200 mm • Adjustable lower beam: can be set in three positions • Hydraulic cylinders: • 2 vertical (Ø 100/60 mm) • 2 horizontal for frame adjustment (Ø 50/35 mm) • Hydraulic unit power: 2.2 kW • Overall dimensions: 3600 × 1000 × 2650 mm • Weight: approx. 1200 kg Applications: The Italpresse Program/30 is ideal for: • Gluing and assembly of window and door frames • Assembling furniture carcasses • Mounting wooden panels and other construction joinery components

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Gannomat Concept 70 Eco Carcase Press Year of Manufacture: 2025 including the following options: - Rapid traverse speed, adjustable movement speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections during carcase pressing, as well as for drawer manufacturing. Brief Overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless adjustment of pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and movement speeds: 5 / 10 / 25 mm/sec (with fine positioning / crawl mode) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: extremely simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: extremely simple operation via LCD display Universal Application Range: • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with overhanging top panels • Drawers • Pressing of multiple carcases/drawers simultaneously Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical carcase press with frequency-controlled geared motors Iedsvxgrrepfx Aahetr • Independent vertical and horizontal pressure beams • Long service life due to tried-and-tested, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Very simple operation thanks to a practical operating panel • Fast thanks to pressure beam positioning speeds of up to 50 mm/sec (option) • Efficient due to precise pressing of various carcase sizes • Flexible thanks to adjustable parameters such as pressing force, pressing time, and movement speeds • Precise thanks to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a state-of-the-art carcase press

Kondisi: baik (bekas), 0024 Isdpfxovv Ul Us Aahotr

Kondisi: bekas, Tahun pembuatan: 1992, Dimensi: 5700 x 1300 x 2400 mm Itodpfx Ajvvkl Doahor Lokasi penyimpanan: Nattheim

Kondisi: baik (bekas), ZIM Hülsta Case Clamp NOW Easy Manufacturer: ZIM Hülsta-Werke Model: NOW Easy Serial no.: 380125028 Maximum cabinet size: 260 x 1100 mm Iedpfx Asvdbv Asahetr 2 lower supports, adjustable 2 upper pressing beams, adjustable Beckoff control panel Roller conveyor: 4500 x 600 mm Roller width: 500 mm Overall dimensions (W x D x H): 3300 x 1800 x 3600 mm You can find more items – both new and used – in our shop! International shipping costs available upon request!

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine! List price: €32,665,- complete in standard configuration including: Sturdy, torsion-resistant steel frame, welded and bolted construction – Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements – Lamella pressure beams with proven gap compensation (Ganner system) for tightly compressed carcass joints – Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support plates – Continuous pressure surface with 95 mm height on the lower vertical pressure beam – Electromotoric adjustment of both pressure beams via precision trapezoidal lead screws (with increased lead and run-out accuracy) and high-performance travelling nuts with grease reservoirs – Pressing action performed electromotorically via 2 separate worm gear motors (2 x 0.75 kW) – Pressing force for the pressure beams is infinitely variable electronically via 2 potentiometers and regulated by a frequency inverter, making the pressing force control entirely wear-free – Horizontal pressure beam pressing force min. 500 daN (kg), steplessly up to max. 2200 daN (kg) – Vertical pressure beam pressing force min. 300 daN (kg), steplessly up to max. 2200 daN (kg) – Press and adjustment speed of the pressure beams with fine positioning selectable by three-stage switch: 5 / 10 / 25 mm/second – Extremely simple operation via 6 separate push buttons, 8 motion sequences selectable via controller – Freely adjustable pressing time preselection with automatic opening, 0-30 min (switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm; Weight: approx. 1800 kg net; Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: Rapid-traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid-traverse speed 50 mm/sec. Sensors can be disabled for special components. 1 set of machine feet (working height 500 mm) Location: Isdpsuf Hx Hefx Aahjtr

Kondisi: bekas, Length: 2,300 mm Iodpfxjt H Tuxe Aahetr Width: 800 mm Height: 2,700 mm Workpiece size: max. 130 x 70 x 145 cm Pneumatic case clamp or gluing press for pressing furniture carcasses or similar items.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Gannomat Mod. 260 case clamp Clamping capacity: 2500 x 1250 x 650 mm Working pressure: 0–10 bar Cylinder stroke: 110 mm Required space: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 CE compliant The machine is currently being serviced, and additional photos will follow shortly. Iedpjrfbnbofx Aahjtr

Kondisi: baik (bekas), Tahun pembuatan: 1995, nomor mesin/kendaraan: 0243 / 25634, tinggi total: 2.600 mm, panjang total: 100.000 mm, lebar total: 1.000 mm, gaya penekanan: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer: OCMAC S.p.A., Italy (ACIMALL) S/N: 0243 / 25634 Year of manufacture: 1995 Hydraulic, self-adjusting, electronic carcass press for assembling furniture components. Automatic infeed of workpieces. Technical specifications: Iodpfeqai H Tjx Aahotr Max. working dimensions: Length: 2300 mm Width: 600 mm Height: 1500 mm Min. working dimensions: Length: 500 mm Width: 300 mm Height: 200 mm Feed rate of conveyor belt: 2.4–12 m/min Press closing time: 20–40 seconds Installed power: 11.5 kW Max. pressure: 120 bar Voltage: 380 V, 50 Hz Net weight: 4,500 kg