Pers tubuh

Gannomat Concept 70 Eco

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) Nodpfx Abjw Td A Io Eodd - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baik (bekas), Tahun pembuatan: 2014, Mesin press badan bekas - GANNOMAT Concept 70 Eco Njdjxhc T Topfx Ab Esdd - Tahun pembuatan: 2014 - Tersedia Desember 2025

Kondisi: bekas, Tahun pembuatan: 2024, nomor mesin/kendaraan: 1300.448, New exhibition machine! List price: €32,665 Complete in standard configuration with: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Lamella pressing beam TOP with 6 elements, lamella pressing beam SIDE with 5 elements - Lamella pressing beams with field-proven tolerance compensation (Ganner system) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are continuous, 38 mm thick, coated support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotive adjustment of both pressing beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance drive nuts with grease reservoir - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely adjustable electronically via 2 potentiometers and regulated by frequency converter, ensuring absolutely wear-free pressing force control - Pressing force for horizontal beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for vertical beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Very easy operation via 6 separate push buttons, 8 movement sequences selectable via the control system - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours) - Working height / loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm - Weight: approx. 1,800 kg net - Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m Nedpfsuf Hx Hsx Ab Ejdd - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Optional equipment: - Rapid traverse feed rate for fast positioning of the pressing beams, controlled by automatic workpiece detection via sensors in the pressing beams; pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing of special parts. - 1 set of machine feet (working height 500 mm)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Ndodpfx Absw Tdyme Eed Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Ndjdpoiidm Nofx Ab Ejd Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -