Pers tubuh

Ramarch PN31

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, I am selling a carcass press for assembling furniture elements, RAMARCH PN31. Year of manufacture: 1998. Material dimensions: 2500 x 1300 x 600 mm Electropneumatic operation. Knedsh Iahgjpfx Anxsc Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately.

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) Kodpfsiidm Nox Anxjnc - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 2.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G3158-0645, de Kodpfxsw Dcdye Anxenc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Longitudinal Flow Dryer - Heating by Electric Power or Hot Water Chamber length (internal): approx. 4500 mm Chamber width (internal): approx. 750 mm Chamber height (internal): approx. 600 mm Chamber volume: 2.0 m³ Top-loading - chest design Manual / fully automatic control Electronic Control C Longitudinal ventilation Fans: 1 unit Fan motor power: 0.55 kW, 400 V, 50 Hz Electric heating: 4.2 kW INCLUDES: Aluminium stacking strips Wood moisture probe Operating instructions, electrical wiring diagram, etc. Space requirement: approx. 5600 mm x 1200 mm x 1600 mm Knjdsy Emqgspfx Anxsc Weight: 400 kg Note for used machines: • Technical data subject to error and prior sale. • Prices stated are ex-works, loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are free to inspect the machines at their location. • Special agreements are only valid in written form. (Inquiries will only be answered if your address and telephone number are provided!)

Kondisi: bekas, Double-sided STOW Cantilever Racks – Used – Excellent Condition. The STOW wall-mounted cantilever rack is constructed from robust, solid steel profiles (I-beams) with high load capacity. It is equipped with 5 arms. The cantilever rack can be extended with additional sections (modules), allowing it to be adapted to evolving warehouse requirements. The offer concerns single-sided STOW cantilever racks, available as 1 or 2 modules: Item Code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 270 mm Net price: €1,069.00 per module/section. Item Code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 300 mm Net price: €1,239.00 per module/section. Item Code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Kjdpfx Asx Ig Hmonxsnc Beam section height: IPE 330 mm Net price: €1,569.00 per module/section. Item Code: MPP001699 Height: 750 cm Depth: 267 cm Bay width: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 270 mm Net price: €2,079.00 for 2 modules/sections. Item Code: MPP001700 Height: 750 cm Depth: 270 cm Bay width: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 300 mm Net price: €2,479.00 for 2 modules/sections. Item Code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 300 mm Net price: €3,139.00 for 2 modules/sections. Additionally, we stock large quantities of warehouse racking systems from various manufacturers such as MECALUX, STOW, MAGO, BITO, SCHÄFER, WDX, SLP, DEXION, PROMAG, etc. All units are high load capacity, available, undamaged, and in very good technical condition. We also offer a wide range of compatible accessories, including cross beams, mesh shelves, WEMA grating, bumpers, installation anchors, etc. Goods can be collected from our warehouse in Chmielów 39-441, Poland, either with your own transport or via arranged shipping. * Large quantities available. * Delivery possible across Europe. * Location: Poland.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, gaya penjepit: 1.200 kN, 1 Ksdpfx Asxyi Rvsnxonc

Kondisi: bekas, Tahun pembuatan: 2012, Mesin bekas Tahun pembuatan: 2012 Mesin dasar - Dynestic 7521 20.6 Meja Dynestic Untuk pengolahan nesting klasik dengan pelat aus Panjang pengolahan 6250 mm (DYNESTIC 20.6 sudah termasuk penahan ke-4 di sumbu Y) Rangka mesin dalam konstruksi las Knodpfxow I U Ecs Anxoc dengan rel prisma yang diasah dan ditempa untuk gantry, kepala agregat dan konsol Gantry dalam bentuk gantry Penggerak rak gigi, gigi miring, pada arah X dan Y, spindel sekrup bola untuk sumbu Z untuk posisi presisi Data teknis: Data teknis mengacu pada DYNESTIC 7521 - 20.6 Silakan lihat lembar data terkait. Ukuran pengolahan: Ukuran maksimum benda kerja untuk pemotongan tepi X = 6250 mm Y = 2100 mm Jangkauan gerak maksimum X = 7360 mm Y = 2720 mm Z = 325 mm Ketinggian lewatan maksimum meja DYNESTIC Z = Langkah ke-1 318 mm / Langkah ke-2 418 mm dari permukaan meja (tanpa alat, tanpa holder) Kecepatan maksimum yang dapat diprogram Kecepatan vektor: 128,0 m/menit X = 80 m/menit, Y = 100 m/menit, Z = 25 m/menit Kubah penghisap 4-tahap dengan penyesuaian ketinggian pneumatik dan jendela penglihatan Tegangan 400 V, 50/60 Hz KONTROL: Prosesor Dual-Core Sistem operasi Windows XP Harddisk 80 GB / RAM 1 GB Port jaringan RJ45 10/100 Base-T Fast Ethernet Keyboard AS dan mouse Microsoft InteliEye (optik) CD-ROM / drive CD-RW (pembakar CD) Remote maintenance Kartu jaringan terintegrasi untuk transfer data kontrol dan program. Transfer data melalui koneksi Internet berkecepatan tinggi Prasyarat: Koneksi Internet berkecepatan tinggi tersedia pada mesin. Meja DYNESTIC Meja pengolahan tetap, berkelanjutan dengan pembagian grid, groove kontinu di arah X dan Y, Jarak antara groove 50 mm dengan tali kedap 25 meter untuk penjepitan pelat aus 1 bidang pengolahan dengan rel penahan / penahan Tinggi 30 mm, dapat diturunkan secara pneumatik Masing-masing 2 rel penahan di arah Y dan 1 penahan di arah X kanan (dilihat dari sisi depan mesin) Bidang vakum Sistem vakum 1-sirkuit Unit bor 7976, 24 spindel Daya penggerak 3,0 kW 18 spindel vertikal dapat diaktifkan secara individual Penataan bentuk L, 10 di X dan 8 di Y Grid 32 mm Diameter mata bor maksimum: 35 mm Panjang total mata bor: 70 mm dari ujung drat (tergantung ketebalan panel) Stroke spindle: 70 mm Arah rotasi: kanan/kiri bergantian n(max.) 1000 - 5710 rpm, dapat diatur tanpa tingkat Holder: drat M 10 - presisi 11 mm tanpa alat, tanpa holder 6 spindel horizontal 2 spindel bor ganda di arah X (jarak 32 mm antara spindel bor horizontal pertama dan kedua) 1 spindel bor ganda di arah Y Holder: drat M 10, presisi 11 mm Panjang total mata bor maks. 70 mm dari ujung drat, tanpa alat, tanpa holder Slot 1 untuk: Pilihan spindel bor ganda di arah X atau adaptor vertikal dengan kekuatan pengumpan ganda Slot 2 untuk: Pilihan mata gergaji di arah X atau adaptor vertikal dengan kekuatan pengumpan ganda Unit milling 7831, 2-tahap Daya: 11,0 kW (S6) n(max.) = 1000 - 24000 rpm, stepless, dengan 2 tahap stroke Daya maksimum pada 12000 rpm hingga 24000 rpm Pendingin udara dengan holder alat HSK-F 63 (dll.)

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Hochleistungs-Doppellinien-Schalenschließmaschine. Wurde für das Verpacken von Schichtsalaten in runden Schalen eingesetzt. Ursprünglicher Neupreis über 300.000 £ im Jahr 2016. Knodeilfkgspfx Anxoc

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, de Knsdpfjx Tqkmox Anxoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, AMADA MODEL HFBE 170-3 170 ton x 3000 complet mit DELEM DA 58 Mehrachsen-CNC-Steuerung ERWIN SICK Maschinenmontierter elektronischer Sicherheits-Lichtvorhang Seitliche und hintere, verriegelte Schutzumzäunung Biegkraft: 170 t Biegelänge: 3.100 mm Kedpfx Anowcd Spsxjnc Abstand zwischen den Ständern: 2.650 mm CNC-Steuerung: DELEM DA 58 Ausladung: 410 mm Hub: 180 mm Arbeitshubgeschwindigkeit: 10 mm/s Anzahl Achsen: 6 inkl. Z-Achse Motorleistung: 13 kW Maschinengewicht: 10.500 kg Maschinenabmessungen (LxBxH): 3.200 x 1.700 x 2.500 mm