Mashtronics D.O.O

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GA0500VBG1780, lebar kerja: 1.600 mm, Diameter kawat (maks.): 8 mm, jenis arus masuk: tiga fasa, daya nominal pada siklus kerja 50%: 100 kVA, tegangan masuk: 400 V, tekanan udara: 6 batang, sekring listrik: 800 A, We are offering this used Ideal GAE 516/07-07-20 mesh welding machine, year of manufacture 2017. Manufacturer: Ideal Model: GAE 516/07-07-20 Year of manufacture: 2017 Condition: used Machine type: Mesh welding machine For resistance welding in single-phase DC technology of shopfitting and industrial grids, wire grates, reinforcements, and other wire products. Gsdpfx Aeym Aqdsh Robi Special features: - Expansion for automatic feeding of lower cross wires (4 - 8 mm) for the production of double rod mesh panels - Loading magazine for flat bars (max. 2,000 mm) - 2 nibbler units for shearing protruding cross wires on the welded product The machine is fully operational and can be inspected in operation. A total of only approx. 80,000 meshes have been produced with the machine. Mesh width: 250 - 1,600 mm Mesh length: 450 - 2,200 mm Welding width: 1,600 mm Longitudinal wire diameter: 2.5 - 8 mm Cross wire diameter: 2.5 - 8 mm Minimum longitudinal wire spacing: 25 mm Minimum cross wire spacing (clear distance): 10 mm Pneumatic welding cylinders: 7 units Three-phase current 400V / 50 Hz Protection: 800 A / phase Air pressure: 6 bar Air consumption: 20.0 Nl/cycle Cooling water consumption, 4 bar, 21-25°C: approx. 80 l/min. If you have any questions or need further information, feel free to send us a message or give us a call.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.700 mm, daya pengelasan (maks.): 600 kVA, Diameter kawat (maks.): 6 mm, jenis arus masuk: tiga fasa, MG950 Lebar kisi-kisi (panjang kawat melintang) Gsdpfx Aoym An Aoh Rsbi untuk pemasukan bawah, 1 jalur: 200 – 900 mm untuk pemasukan atas, 1 jalur: 200 – 1700 mm untuk pemasukan atas, 2 jalur (lebar efektif) maks. 1530 mm Panjang kisi-kisi maks. 3200 mm min. 350* mm Jarak antar kawat memanjang terluar maks. 1600 mm Pitch kawat memanjang min. 20 mm Pitch kawat melintang min. 10 mm dapat diprogram tanpa tahapan Jarak bebas kawat memanjang min. 15 mm Jarak bebas kawat melintang min. 8 mm Diameter kawat memanjang 2,0 – 6,0 mm Diameter kawat melintang untuk pemasukan bawah 1,5 – 4,0 mm untuk pemasukan atas 2,0 – 6,0 mm Kelebihan kawat memanjang maks. 300 mm min. 10 mm Kelebihan kawat melintang maks. 300 mm min. 5 mm Jumlah kelompok pengelasan individu ESG 12 Jumlah kelompok pengelasan portal PSG18 12 Jumlah kawat memanjang maks. 12

Kondisi: bekas, EVG Mesh Welding Line | Model SLW 12/94 – RV Gjdpfx Aoymcp Tsh Rjbi Technical Data: - Max. mesh width: 2,600 mm - Max. mesh length: 8,000 mm - Cross wire pitch: min. 50 mm, then variable - Longitudinal wire pitch: 100 mm, 150 mm, 200 mm, 300 mm - Cross wire diameter: min. 4 mm, max. 8.5 mm - Longitudinal wire diameter: min. 4 mm, max. 12 mm - Maximum welding capacity: (D=100 mm) E + F = 20.5 mm - Machine speed (see operating diagram): max. 130 cycles/min - Wire coil weight: max. 3,000 kg - Stacking height: max. 650 mm - Stacking weight: max. 4,000 kg Electrical Data: - Rated power of welding transformers: 1,500 kVA at 50% duty cycle - Drive power: 355 kVA - Mains voltage: 3 x 400 V - Mains frequency: 50 Hz Condition: Line currently in production. Max. mesh width: 2,600 mm Max. mesh length: 8,000 mm Min. cross wire pitch: 50 mm, then variable Longitudinal wire pitch: 100 mm, 150 mm, 200 mm, 300 mm Cross wire diameter: 4 – 8.5 mm Longitudinal wire diameter: 4 – 12 mm Max. welding capacity: (D=100 mm) E + F = 20.5 mm Machine speed (see diagram): max. 130 cycles/min Wire spool weight: max. 3,000 kg Stacking height: max. 650 mm Stacking weight: max. 4,000 kg Rated power of welding transformers: 1,500 kVA at 50% duty cycle Drive power: 355 kVA Voltage: 3 x 400 V Frequency: 50 Hz

Kondisi: bekas, Automatic Reinforcement Mesh Welding Machine MCC001 This machine is designed for welding steel reinforcement meshes from pre-cut rebars that comply with EN 10080. Technical Specifications: Rebar diameter: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3,000 mm Minimum spacing between longitudinal bars: 100 mm Distance between transverse bars: 10 mm – 999 mm Length of transverse bars: 100 mm – 1,250 mm Screen movement speed: 0.1 m/s – 1 m/s Pressing force: 60 kg – 190 kg Productivity: 1 cycle/min Electricity: Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Gbodpfxjymcpys Ah Rei Power: 100 kVA Maximum motor power: 0.8 kW Single welding transformer power: 35 kVa Pneumatics: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum inlet coolant temperature: 35°C Coolant consumption: 60 l/min — All technical parameters and terminology have been adjusted for use in industrial/engineering publications and professional machinery marketplaces.

Kondisi: bekas, EVG G95 Mesh Welding Line 2.5 x 6 m Mesh welding lines for efficient production of standard reinforcement mesh in medium to large batches. - Automatic and ultra-dynamic wire feeding from coils - Very high production speeds with single-pass welding lines - Utilization of double spot welding as the ideal technology for the thick wire diameter range Scope of supply: Complete machine with supports. Optional: Fixed coils up to the discharge conveyor belt. Technical data: Longitudinal and cross wire diameter: 5 – 12 mm Longitudinal wire spacing: 100, 150, 200 mm 36 horizontal longitudinal wire holders for 3-ton coil Cross wire switch with double horizontal decoilers Blank tying and lifting machine not included. Maximum welding width: 2,600 - 3,200 mm Longitudinal and cross wire diameter: 5 – 12 mm Gsdpfx Ajymb Unsh Rjbi Longitudinal wire spacing: 100, 150, 200 mm 36 horizontal line wire holders: for 3-ton spool

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 2.000 mm, Diameter kawat (maks.): 6 mm, jenis arus masuk: tiga fasa, kecepatan operasi: 142 mm/dtk, ukuran mesh: 9.999 mm, daya semu kontinu: 833 kVA, Kami menawarkan mesin las jaring bekas Schlatter MG600/MG24.4/10Sp-AC, model tahun 2016. Tipe: MG600/MG24.4/10Sp-AC Nomor seri: 4885.31609 Tahun produksi: 2016 Tegangan primer nominal U1N: 400 V Gbjdoyaqzqjpfx Ah Rsi Tegangan sekunder nominal Ua: 230 V Jumlah fasa primer: 3 ~ Jumlah fasa sekunder: 1 ~ Frekuensi: 50 Hz Daya nominal Sp: 833 kVA Arus nominal primer I1,p: 1202 A Arus hubung singkat primer I1cp: 50 kA Arus hubung singkat sekunder I’acp: 10 kA Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: baru, Tahun pembuatan: 2025, lebar kerja: 2.500 mm, Diameter kawat (maks.): 12 mm, ukuran mesh: 100 mm, 6-12 mm Panjang jaring: 6 m Gbodexyqg Ejpfx Ah Roi Lebar jaring: 2,5 m 24 titik las Kecepatan pengelasan: 40-70 kali/menit

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, VOLLautomatische EVG G55/102 Schweißanlage für Bewehrungsmatten Baujahr: 1999 Die Anlage wurde vor 4–5 Jahren generalüberholt. Der Schaltschrank wurde im DEZEMBER 2018 vollständig mit neuer Software, PLC S7-405 und elektrischen Systemen modernisiert. Automatische Linie + Querdrahtzuführung von Coil Mattenbreite: min. 1200 mm bis max. 2500 mm Mattenlänge: min. 2000 mm bis max. 6000 mm Abstand AT (Abstand der Querstäbe): 50 mm – 1000 mm stufenlos Abstand AL (Abstand der Längsstäbe): 100 mm, 150 mm und Vielfache Durchmesser AT: min. 3,8 mm bis max. 8 mm Durchmesser AL: min. 3,8 mm bis max. 8 mm Maschinengeschwindigkeit: max. 150 QD/min. Coilgewicht: max. 3.000 kg Stapelhöhe: max. 700 mm Tafelgewicht (Panelgewicht): max. 150 kg Nennleistung der Schweißtransformatoren bei 50 % ED: 960 kVA Antriebsleistung: 153 kW Netzspannung: 3 x 400 V Netzfrequenz: 50 Hz Abmessungen (ca. mm): Maschine: L x B x H Gewicht: G55L/102-RV: 4.900 mm x 1.800 mm x 2.300 mm 15.000 kg T6B/102: 7.500 mm x 2.200 mm x 1.800 mm 6.000 kg T6B/102: 5.200 mm x 1.700 mm x 2.200 mm 4.200 kg Hauptspannung: 3 x 400 V Frequenz: 50 Hz Anschlussleistung: 960 kVA (bei 50 % ED) 192 kVA (Antriebsleistung) Ausstattung: - 24 Längsdraht-Richtstationen - Längsdraht-Einzug mit Lars-Loop - Längsrichtapparate - Längsstabdrahteinzug - Schweißkopf - Schere Gedpfjxvmamox Ah Robi - Mattenauslauf - Wendetisch/Stapelaggregat - Auslaufrollbahn (7 m) - Querzuführungen - Querdrahteinzug

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya pengelasan (maks.): 180 kVA, Schlatter Posiweld tipe Libra. Mesin dibuat pada tahun 2005, kontrolnya ditingkatkan oleh Schlatter pada tahun 2022. Gbsdpfexlvn Eox Ah Rsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, QRP26 Portal Pengelasan Mesh Otomatis berikut: • Perlengkapan untuk 49 kawat memanjang • Elektroda atas dan bawah serta distribusi arus • Press pengelasan pneumatik x 25 (Paralel/Langsung Triplex) • Transformator 250kVA x 13 • Pengendali pengelasan • Panel listrik • Komputer pemrograman • Lebar 2500mm (100”) Gbodpfx Ahoxgg T Us Roi Termasuk sistem otomatis PLL 26 untuk pengambilan dan pemuatan kawat memanjang.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, de Gbsdsxgg Rtspfx Ah Roi

Kondisi: diremajakan ulang (bekas), SCHLATTER MG24 Welded Wire Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Minimum spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Adjustable via cutting device (0–1) Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Maximum number of longitudinal wires: 24 MG 24.1/8C MESH WELDING MACHINE – Basic configuration including: - 1 Machine base frame - 1 Upper support for reception of press units, continuously adjustable by handwheel - 1 Magnetic support unit with holding magnets and cross wire monitoring - 1 Row of pneumatic solenoid valves for operation of the press units - 1 Air and water installation - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front section: 25 – 250 mm, adjustable via cutting device (0–1) - 1 Feed trolley with panel lifting device - 1 Tool kit for machine adjustment WELDING SECTION including: 8 Type C transformers Rated power per transformer: 100 kVA Secondary open-circuit voltage: 7.1 V Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal wire current bridges for wire spacing: 50–100 mm 12 Longitudinal wire current bridges for staggered wires: 100 mm 10 Longitudinal wire current bridges for wire spacing: 100–150 mm 8 Longitudinal wire current bridges for staggered wires: 150 mm 6 Longitudinal wire current bridges for wire spacing: 150–200 mm Gbodpfx Ahjwu Tu De Roi 6 Longitudinal wire current bridges for staggered wires: 200 mm 24 Bottom copper electrode holders with standard angled electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire clamping jaws Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 – 1,600 mm Max. spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Min. spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Max. number of longitudinal wires: 24

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Welded Mesh Line JAGER U-Gsa-st Fully refurbished, "as new" Technical data: - 24 pay-offs for longitudinal wire coils, longitudinal wire straightening unit - Longitudinal wire feeding system - Longitudinal wire looping system - Longitudinal wire straightening equipment - Cross wire magazine - Number of line wire feeders: 24, up to 10 mm - Line wire diameter: 4 to 10 mm - Cross wire diameter: 4 to 10 mm - Line wire spacing: 100, 150, 200, and 300 mm - Cross wire spacing: min. 30 mm, continuously programmable Gbodowu Dcxspfx Ah Rsi - Maximum cross wire length (mesh width): 2500 mm, max. welding width: 2400 mm - Mesh length: min. 3000 mm, max. 6000 mm - Transformers: 8 x 160 kVA - Number of feeder lines: 24, up to 10 mm - Line cable diameter: 4 to 10 mm - Cross wire diameter: 4 to 10 mm - Line cable spacing: 100, 150, 200, and 300 mm - Cross cable spacing: min. 30 mm, continuously programmable - Maximum cross wire length (mesh width): 2500 mm - Maximum welding width: 2400 mm - Mesh length: 3000 – 6000 mm - Transformers: 8 x 160 kVA

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Komplette Gitter-Schweißanlage Die Anlage besteht aus: 1. Gitter-Schweißlinie SCHLATTER Modell MG-230 Gjdpowr Tk Hofx Ah Rsbi Min./Max. Drahtdurchmesser: 3,5 – 14,00 mm Maximale Gitterbreite: 2.500 mm Längs- und Querdrahtzuführung: aus vorgeschnittenen Drähten/Stäben Baujahr: 2007 2. Kombinierte Walz-/Rippungs-/Richt-/Schneidlinie COMBO-Linie – Draht walzen, rippen, richten und schneiden Baujahr: 2023 3. Richt- und Ablängmaschine WAFIOS Modell R-41-L Min./Max. Drahtdurchmesser: 3,00 – 10,00 mm Maximale Schnittlänge: 10.000 mm Baujahr: 1990 Für weitere Informationen kontaktieren Sie uns bitte. VIDEOS auf Anfrage verfügbar.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Hersteller: EVG Typ: TSD 7-25 Maschinennr.: 958 Baujahr: 1993 Arbeitsrichtung: L > R Trägertypen: KT 8… Gjdpfewp Ilysx Ah Rjbi Trägerhöhe (mm): 90-250 Trägerlänge min. (mm): — Trägerlänge max. (mm): 14.000 Fixlängen: Ja Teilung (mm): 100/200 Abwickler (Stk.): 5 LAR: Ja Drahtdurchmesser: 5-12 mm glatt/gerippt Diagonale: 4-7 mm glatt/gerippt Stapelhöhe max. (mm): 500

Kondisi: bekas, Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D34E/8218, Nomor penawaran: D34E/8218 Jenis mesin: Mesin las kawat jala Merek: SCHLATTER Tipe: PG8 Gbsdpfx Ahowi Thmo Rei Tahun pembuatan: 1970 Diameter kawat: 1,5-6,5 mm Lebar kerja: 850 mm Jarak kawat memanjang: 20-60 mm Jarak kawat melintang: 10-100 mm Lokasi: Di Eropa

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, SCHLATTER-Modell MG 316 Gitter-Schweißanlage Technische Daten – • Verwendungszweck: Zur Herstellung von Standardgitter • Hersteller: Schlatter Gbsdpev Unt Njfx Ah Rsi • Zustand: Außer Betrieb • Längsdraht-Ø min: 3 mm • Längsdraht-Ø max: 8,5 mm • Querdraht-Ø min: 3 mm • Querdraht-Ø max: 8,5 mm • Takte (Querdrahtzuführung) max.: ca. 120 • Maximale Mattenbreite: 2.500 mm • Max. Anzahl Längsdrähte: 26 • Längsdrahtzufuhr: Von der Spule • Querdrahtzufuhr: Von der Spule • Längsdrahtabstand: 100/150/200 mm • Querdrahtabstand: 100–400 mm • Baujahr: 2002 • Gewicht: ca. 30.000 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 2.450 mm, Diameter kawat (maks.): 12 mm, jenis arus masuk: AC (pendingin udara), generaluberholte-schlatter-mg903-pg24 Gjdpov Ed Anefx Ah Rsbi

Kondisi: baik (bekas), Tahun pembuatan: 1991, Mesh-Schweißanlage EVG Modell G95/102 Min. / max. Drahtdurchmesser – 4,00 – 12,00 mm Max. Gitterbreite – 2.750 mm VOLLautomatisch – Längs- und Querdrähte werden von Coils / Spulen zugeführt. Gbodevxq Eiopfx Ah Rji Bitte beachten Sie das beigefügte Dokument!

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.200 mm, Schlatter MG900, lebar 1.200 mm, dengan 4 x 100 kVA trafo, kontrol diperbarui dengan Siemens S7-300 PLC dari tahun 2016. Secara mekanis telah direkondisi total dan semua kabel kontrol baru. Godpfxsvvf T Ao Ah Robi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, de-Maschinen-Meshschweißanlage Hersteller – Schnell Italy Baujahr – 2020. Min./Max. Drahtdurchmesser – 4,00 – 12,00 mm Maximale Breite der Gittermatten – 2.500 mm Maximale Länge der Gittermatten – 9.000 mm Gbjdpfxovuhvqs Ah Rji Längsdrahtzuführung – aus vorab geschnittenen Drähten Querdrahtzuführung – aus vorab geschnittenen Drähten Zustand – AUSGEZEICHNET!!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.240 mm, Diameter kawat (maks.): 12 mm, jenis arus masuk: AC (pendingin udara), en-Schlatter MG900 ZG12 Machine Overview The Schlatter MG900 is a high-performance, fully refurbished resistance welding system, specifically designed for the production of wire mesh panels. With a working width of up to 1250 mm and a length of 3000 mm, the machine processes wire diameters up to 12 mm. The system has been extensively modernized to ensure maximum efficiency and flexibility in production. Technical Specifications 1. Main Machine Components: Longitudinal Wire Feed (LV) - Converted to a high-precision servo axis. - Hopper magazines for longitudinal wires up to 3000 mm. MG12.4 Mesh Welding Machine - Equipped with 3 transformers (expandable if required) - Four (4) Schlatter welding presses, 5kN each Gbodpfxjvtg Sbs Ah Rsi - Expandable up to 12 welding presses and 6 transformers in final expansion stage Cross Wire Feeder (QFD34) - Enables double wire insertion for two different longitudinal wires - Note: Second insertion level shown in photos is not yet installed. Mesh Extraction (MVL) - Driven by an MS2N servo motor with CtrlX from Bosch Rexroth - Equipped with three Schlatter mesh grippers (expandable on request) Mesh Stacker (MS) - Automatic stacking of mesh panels (travel distance 3100mm) Control and Power Cabinet - Siemens S7 TIA machine control - Rexroth ControlX components for high-dynamic motion control Longitudinal Wire Charger (LFE) - Not included, available on request. Highlights and Advantages: - Complete refurbishment: The machine has been thoroughly reconditioned and modernized - Maximum flexibility: Expansion options up to the final configuration - Precision: Servo motors and state-of-the-art control technology deliver high production accuracy - Efficiency: Automatic processes via the mesh stacker and servo-driven longitudinal wire feed - Future-proof: Utilizes the latest automation and control systems Fields of Application - Production of reinforcement mesh - Manufacturing of industrial mesh panels - Flexible operation for various wire gauges and formats Specification: - Mesh width (cross wire length): max. 1250mm / min. 200mm - Mesh length, manual loading: max. 3200mm / min. 300mm - Distance between outermost longitudinal wires: max. 1200mm - Longitudinal wire spacing: 20 - 150mm - Cross wire spacing: min. 12.5mm, infinitely programmable - Longitudinal wire diameter: 2.0 - 10.0mm - Cross wire diameter: 2.0 - 8.0mm - Number of longitudinal wires: max. 24 Flat Bar - Upright 3 x 25 mm - Quantity: 6

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, de Godpfsudipfjx Ah Rjbi

Kondisi: sangat baik (bekas), Produktionsanlage zur Herstellung von 3D-Zaunpaneelen Die Anlage besteht aus: - Vollautomatische Schweißgitteranlage für 3D-Zäune (Marke: PRATTO) - Pulverbeschichtungsanlage für 3D-Zaunpaneele (neuwertig – nur montiert und getestet) Für weitere Informationen kontaktieren Sie uns bitte. Gbodpotywvusfx Ah Roi

Kondisi: bekas, Tahun pembuatan: 2000, Schlatter Maschenschweißanlage Bitte kontaktieren Sie uns für weitere Informationen. Vielen Dank! Gsdpfx Ahetmw Nye Rsbi