Beli Hydraulic double-column presses & four-column presses bekas (215)

Kondisi: bekas, Machine not operational – control unit is not functioning Special offer price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force 500 tons Distance between uprights (front/back): 2520 mm Table size: 2500 x 2500 mm Bdjdpfx Asdzqptoggei Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Max. installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1,000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guideway for the ram - Hydraulic ram locking at top dead center - Free-standing control cabinet (200 x 50 cm) - Electrical control: SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7”) - Free-standing two-hand control panel - Floor-level installation - Table plate: 2510 x 2530 x 135 mm (approx. 6,700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Space required for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition

Tahun pembuatan: 1999, Kondisi: bekas, Pressure 630 t Passage width 1390 mm Bjdpelp U R Sofx Aggjdi Stroke 400 mm Table size 1390x1250 mm Total power requirement 75 kW Machine weight approx. 36 t Space requirements approx. WxDxH 3200x2800x4000 mm Rapid traverse – working stroke Pressure and travel shut-off Ram locking

Kondisi: baik (bekas), Tahun pembuatan: 1989, Pressing force: 1,000 kN Table size: 800 x 750 mm Distance between uprights: 900 mm Ram: 800 x 600 mm Installation height: max. 800 mm Stroke: 480 mm Speeds: Rapid down: 300 mm/s Pressing: 30 mm/s Rapid return: 300 mm/s Total power: approx. 31 kW Weight: approx. 13,000 kg Footprint dimensions: approx. 1.6 x 2.90 x 3.8 m (D x W x H) Bdjdpfsd E U Nnsx Aggji • Hydraulic draw cushion, active, 400 kN, stroke 200 mm • Approved for manual loading operations • Equipped with oil-air cooler • Ram guided by 4 hard-chromed guide columns

Kondisi: baik (bekas), Tahun pembuatan: 1970, Pressing force 80 t Passage width 350 mm Stroke 600 mm Table dimensions - longitudinal 400 mm Space requirement approx. 1400 x 1050 x 2350 mm This press is still in very good condition and has seen little use. Bdedpfx Agevwgqrjgsi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Pressing force 300 t Stroke 500 mm Distance between columns 1250x1000 mm Installation height 1000 mm Rapid traverse 22 mm/s Working speed 2 mm/s Motor 7.5 kW Length 2000 mm Width 1500 mm Height 3300 mm 4-column guide Bdjdpfx Agjvgncnjgei Round ram guide Table and ram with T-slots Two-hand operation Operating manual Siemens touchscreen control and new electrical control cabinet 50 programs storable, programmable for: - Upstroke and downstroke ratio - Dwell time at bottom - Decompression time - Working pressure setting - Piece counter - Prestop in upward and downward motion - Setting for manual and automatic mode - Management of alarms and malfunctions

Kondisi: bekas, Press force: 1000 t Table length: 2110 mm Table width: 1755 mm Stroke: 500 mm Number of strokes/min: 18 min Working height: 380 mm Eccentric type: 4-point Machine weight approx.: 107.25 t Required space approx.: / m WILKINS & MITCHELL Deburring Press with Accessories Press force: 1000 t Bdsdpfx Aogrnaqeggei With ejection table and gearing component Table size: 2110 x 1755 mm Weights Frame: 47.1 t Table: 8.84 t Guides: 1.72 t Drive: 26.47 t Counterbalance cylinder: 1.65 t Motor mount and safety guard: 2.04 t Ram: 11.53 t Adjusting screws and bolts: 2.66 t Ram adjustment: 0.85 t Miscellaneous: 1.02 t Hydraulic ejector: 0.52 t Total weight: 107.25 t

Tahun pembuatan: 1984, Kondisi: diremajakan ulang (bekas), PRESSÃO 200t MESA SUBIDA/DESCIDA 1130x860mm CURSO 250mm ABERTURA (LUZ DO DIA) 500mm Bjdsdzp Ezspfx Aggjdi

Kondisi: bekas, 1 Bdedpfjv Srfwsx Aggei

Kondisi: bekas, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture: 1986 - Refurbished in 2000 Pressing force: 200 tons Distance between uprights (front): 2050 mm Clearance between uprights (lateral): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid advance speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Bedpfx Ajdzp Tceggodi Control pump motor power: 11 kW Power supply: 380 Volt, 50 Hz - 8-way flat guide for ram - Clamping plate with 22 mm T-slots on ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in top dead center - Travel measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - Two-hand control console, free-standing - Ground-level installation - Central lubrication system - Operating manual with circuit diagrams Space requirement (upright): L x W x H 3700 x 2900 x 5900 mm Total machine height with motor: 5900 mm Space requirement for horizontal transport: L x W x H 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition

Kondisi: bekas, Tahun pembuatan: 1952, Type of machine: Punch Press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of manufacture: 1952 Pressing force: 500 t Clear opening: 450 mm Location: Bdsdpewxw H Eofx Aggoi In Germany

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: 18282, Total pressing force: 140 t Stroke: 800 mm Installation height: 1,004 mm Distance between uprights L-R: 2,060 mm Table clamping area approx.: 2,000 x 520 mm Ram clamping area approx.: 2,040 x 520 mm Bdjdpjuqd Nuofx Aggoi Working speed: 4-20 mm/s Rapid traverse: 135 mm/s Return speed: 120 mm/s Machine weight approx.: 14 t Height above floor level approx.: 4,810 mm Oil capacity approx.: 700 l Standard equipment The press is equipped with a frontally extendable sliding table, which can be extended by 500 mm. Water cooler, SICK light curtains at the front and rear, SIEMENS S7-300.

Kondisi: bekas, Tahun pembuatan: 1991, hydr_stanz_praegepresse_angebot_1 Bodpfxotqqlco Aggjdi

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Pressure: 300 tons Distance between uprights: 1800 mm Side passages: Yes Installation height: 1000 mm Table: 1800 x 1000 mm Ram: 1800 x 1000 mm Bdodpfx Aegbvkvsggei Stroke: 600 mm Weight: 43 tons Height: 4700 mm Siemens S7 control system Floor-level installation Sick light curtain Blank holder cushion: Stroke 200 mm

Kondisi: bekas, Double Column Hydraulic Press SCHÖN Type SH 25 Machine No.: 4453 Year of manufacture: 1999 Pressing force: 25 t Column spacing: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection: 380 Volt, 50 Hz Equipment: - SICK safety light curtain, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid traverse and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press dwell extension 1-10 s (pressure holding time) - Time setting for return stroke speed - Blowing device prepared electrically, without air valve - Hydraulic tool safety, manually adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Bdjdpow A Amrsfx Aggei Weight: approx. 1,200 kg Good condition

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 160 t, HIDRALMAC Four-Column Press – 160 t – 1,200 × 800 mm – Tryout Press For sale is a hydraulic four-column press (tryout press) from HIDRALMAC with a pressing force of 160 t. This machine is ideal for tool testing, die fitting, and small batch production. Its compact design, precise controllability, and robust construction provide a reliable solution for workshop and production environments. ==== Bodefxyi Iepfx Aggjdi Technical Data + Information: Hydraulic Four-Column Press – Tryout Press – 160 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Tryout Press - Design: Four-Column Press - Pressing Force: 160 t - Machine Weight: approx. 7 t - Total Power Requirement: 7.5 kW - Main Cylinder: 1 piece ==== Working Area - Installation Height: 800 mm - Stroke: 600 mm - Table Height: 850 mm - Lateral Column Spacing: 400 mm ==== Table & Load - Table Surface: 1,200 × 800 mm - Max. Table Load: 5 t - Return Force: 16 t ==== Speeds - Approach Speed: 1–9.8 mm/sec - Return Speed: 1–9.8 mm/sec ==== Hydraulics & Operation - Oil Volume: approx. 220 l (AW 46) - Robust and low-maintenance hydraulic design ==== Construction & Features - Column Diameter: 160 mm - Compact design for flexible use - Suitable for die fitting and tryout work ===== Die fitting, tryout work, small batch production, toolmaking, forming technology Hydraulic press, hydraulic press, tryout press, four-column press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety directive NR 12, which is based on these standards. Our greatest strength is special-purpose machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are mainly equipped with components from leading European manufacturers.

Kondisi: bekas, Pressing force 400 kN, table 450x560 mm, ram 375x300 mm, distance table to ram 340 mm, stroke 160 mm, through-hole diameter 100 mm, lateral column passage 220x410 mm. Bdjdpfxjum Uuyo Aggoi

Kondisi: baik (bekas), Tahun pembuatan: 2000, lebar meja: 1.000 mm, panjang meja: 1.800 mm, lebar pelat tuas: 600 mm, panjang total: 25.000 mm, lebar total: 27.000 mm, tinggi total: 47.000 mm, berat keseluruhan: 43.000 kg, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Side walkways Bodpfx Aetiwgioggodi Floor-level installation

Tahun pembuatan: 1980, Kondisi: bekas, Press capacity 100 t Bdjdpfx Agsdlxctogei Frame gap - mm Stroke 350 mm Table dimensions 1150 x 700 mm Total power requirement 11 kW Machine weight approx. t Space requirements approx. m with ram shock absorber and drawing cushion Machine without control cabinet

Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0280, gaya penekanan: 160 t, en-001 Bjdpfxod Ap Udj Aggjdi

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 100 tonnes Frame clearance (front): 1,400 mm Stroke: 250 mm Side passages: 400 mm Table: 1,250 x 1,100 mm Ram: 1,250 x 1,100 mm Stroke: 250 mm Speed: - Rapid forward: 400 mm/sec - Rapid return: 330 mm/sec Bsdec Uwx Dopfx Aggsdi - Under load: 24–43 mm/sec Power requirement: 33 kW Weight: 10,000 kg Height: 3,300 mm Width: 1,700 mm Depth: 1,800 mm Table ejector force: 6 tonnes Cutting stroke damping Pressure, time and travel dependent control Two-hand operation

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, gaya penekanan: 400 t, Hidrobrasil double-column press – 400 t – 1,500 × 1,500 mm – Sliding table press with ejector For sale is a hydraulic double-column press with sliding table from Hidrobrasil, offering a pressing force of 400 t. This machine is designed for demanding forming and pressing operations and, thanks to its movable table and integrated ejector, provides high flexibility in tool handling. With modern controls, high precision, and comprehensive safety equipment, it is ideally suited for industrial series production and complex applications. ==== Technical Data + Information: Hydraulic double-column press – sliding table press – 400 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-column press - Machine type: Sliding table press - Construction: Double-column design - Pressing force: 400 t (4,000 kN) - Machine weight: approx. 28 t - Dimensions (L × W): approx. 3,800 × 4,475 mm - Height: approx. 4,300 mm - Number of operator sides: 1 ==== Working Area - Max. opening width: 800 mm - Stroke: 800 mm - Table height above floor: 1,100 mm - Minimum hall height: 5,500 mm - Parallelism deviation: ± 0.1 mm ==== Table & Ram - Table size: 1,500 × 1,500 mm - Ram size: approx. 1,600 × 1,500 mm - Table plate precision-milled with T-slots (DIN 650-22) - Ejector in table: 20 t / 350 mm stroke - Ejector moves outward with the table ==== Speeds - Closing speed: up to 100 mm/sec - Opening speed: up to 100 mm/sec - Pressing speed: 3–10 mm/sec ==== Hydraulics & Performance - Operating pressure: max. 300 bar - Main pump: Bosch Rexroth axial piston pump (approx. 145 l/min) - Auxiliary pump: Bosch Rexroth gear pump (10 l/min) Bedpfx Aoph Uk Neggedi - Pressure holding: up to 300 sec - Main motor: 40 kW - Oil volume: approx. 1,000 l - Oil temperature monitoring: warning at 55 °C, shutdown at 60 °C ==== Controls & Operation - Control: Siemens S7-1200 - Touchscreen: 9" monitor - Remote maintenance: SECOMEA Ethernet - Operating modes: setup, single stroke, automatic/cycle - Pressure adjustment: 60–400 t via touchscreen - Stroke limit via pressure or position - Free positioning of ram - Swiveling control panel - Two-hand operation with function selector ==== Safety & Equipment - Light curtains: SICK / PILZ (14 mm, up to 1,800 mm height) - Hydraulic and mechanical ram locking - Automatic lubrication - Recirculating oil cooling - Side doors with viewing windows (1,000 × 800 mm) ==== Construction & Features - Precise deflection: ≤ 0.2 mm/m - Robust construction for continuous operation - Suitable for demanding forming and series production processes ===== Forming, series production, toolmaking, pressing operations, sheet metal processing Hydraulic press, double-column press, sliding table press, industrial press, forming press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our great strength lies in special machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics are equipped predominantly with components from leading European manufacturers.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Pressing force: max. 630 t Installation height: max. 375 mm Stroke: max. 275 mm Weight: 4,500 kg. Bjdpfx Agsgwv S Uegsdi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are being placed on drive system components. Bdjdpfxjgtty Ts Aggsi Increased power transmission and higher torques with simultaneously smaller installation sizes are the key challenges. As a result of this development, demand for cold-formed splines has increased. With the Vertical Splines Press (VSP), Sack & Kiesselbach provides customers with a solution that offers both technological and logistical advantages compared to conventional technologies such as rolling or broaching. This relatively compact and highly user-friendly press can be configured for either manual or fully automated operation. In addition to the splines press, customers can also obtain the corresponding tooling system and relevant process technology all from a single source. 1 used Vertical Splines Press Make: Sack & Kiesselbach Model: VSP 50/30 Year of manufacture: 2015 Technical Data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between uprights: 530 mm Splines cylinder speed: 3–9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special Equipment: Digital position measuring system Spline tooling for internal toothing

Kondisi: bekas, nomor mesin/kendaraan: 4396, gaya penekanan: 200 t, en-GB-1 Bjdpfx Agsfxyh Aogsdi

Kondisi: bekas, MÜLLER 250 t Bsdpfx Ajrfxhkoggjdi Druckkraft: 250 t Hub: 550 mm Tischabmessungen: 2500 x 1400 mm