Beli Gergaji bundar manual dari logam ringan / aluminium, diameter mata pisau 300-369 mm bekas (19)

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.000 mm, lebar total: 700 mm, tinggi total: 1.500 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 250 kg, tegangan masuk: 380 V, hentian panjang: 3.000 mm, tinggi angkat: 250 mm, Kami menawarkan gergaji bundar logam/aluminium OZ MACHINE METEOR - II 420 bekas ini, buatan tahun 2021. Model: METEOR - II 420 Nomor Seri: 018/210023 Tahun Pembuatan: 2021 Daya Total: 3 kW Frekuensi: 50–60 Hz Tegangan: 400 V AC 3P 1N PE Arus: 6,4 A Dimensi (P×L×T): 3760×1080×1325 mm Berat: 264 kg Tekanan Udara: 6–8 bar Konsumsi Udara: 38 l/menit Gelhozy Upkjcdwxeug Kecepatan Tanpa Beban: 3000 rpm Diameter Mata Gergaji: 420 mm Termasuk sistem penyedot debu dan kompresor Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 350 mm, Motor gergaji: 1,5 / 1,8 kW Ukuran mata gergaji: 350 mm 2 Kecepatan putar mata gergaji: 1400 / 2800 rpm Gelhszzvwrscdwxjug Sudut gergaji tak bertingkat: ± 45°

Kondisi: bekas, Diameter mata gergaji 350 mm Rentang pemotongan pada 90 derajat: sekitar 120 mm (bentuk lingkaran) Rentang pemotongan pada 90 derajat: 110 mm (bentuk persegi) Rentang pemotongan pada 90 derajat: 200 x 88 mm (bentuk pipih) Rentang pemotongan pada 45 derajat: 115 mm (bentuk lingkaran) Rentang pemotongan pada 45 derajat: 110 mm (bentuk persegi) Rentang pemotongan pada 45 derajat: 150 x 80 mm (bentuk persegi) Total kebutuhan daya 1,5/1,8 kW Berat mesin sekitar 0,4 ton Dimensi P x L x T 1,2 x 0,9 x 1,5 m Mesin pameran - Tidak pernah digunakan - Pemotongan miring kiri/kanan 45° - Pemotongan miring kepala hingga 45° (dengan pengubah) Guelhcdwjzyva Roxsg - Perangkat penjepit cepat pneumatik ganda - Termasuk sistem penyemprotan mikro - Termasuk mata gergaji logam keras

Kondisi: bekas, Metall- und NE-Metall-Kreissäge MÖSSNER MK/14 Drehzahlbereich: 80 bis 3000 U/min Tischgröße: 900 x 700 mm Max. Sägeblattdurchmesser: Ø 315 mm Max. Schnitthöhe: 85 mm Motor: 2-Gang Ideal zum Sägen von Aluminiumplatten, Bronze usw. Spannung: 380 V Länge: 1100 mm Tiefe: 900 mm Gslhezzv Rrecdwxeug Gesamthöhe: 1300 mm Gewicht: ca. 500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Straight cut, Range 105 x 105 mm, round = 120 mm Motor 1.7 / 2.2 kW Gjlhcdoznc Svswxoug Saw blade size 350 mm Saw blade speed 1400 / 2800 rpm pneumatic clamping

Kondisi: baik (bekas), Aluminium crosscut saw, aluminium circular saw, semi-automatic aluminium circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and mitre saw, aluminium-metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, Velox 350 aluminium-metal circular saw with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double mitre: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm Guslhor A H R Tjcdwxeg -Weight: 198 kg

Kondisi: baru, Saw blade diameter 420 x Ø 40 mm Cutting diameter 170 mm Cutting length 410 mm Saw blade dimensions 420x3.2/2.4x40 mm Speed 3,500 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 120 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting applications * Drive motor 3.0 kW - 400 Volt - Double-sided mitre adjustment (60° / 45°) with fixed stops - Compound mitre cuts on both sides at 45°, with fixed stops - Robust cast iron construction - Precision recirculating ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Continuously height-adjustable saw blade - Port for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound mitre adjustment via handwheel, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative, for aluminium and plastics - Continuously adjustable hydraulic feed brake - Pneumatic material clamping from above, standard equipment: * 2 vertical clamping cylinders, adjustable, with manual lever valve - 1x machine stand - More powerful drive motor (3.0 kW) Golhexabztocdwxoug

Kondisi: baru, Circular saw blade diameter 520 x Ø 50 mm Cutting diameter 200 mm Cutting length 420 mm Cutting height at 45° 140 mm Saw blade dimensions 520x3.6/3.0x50 mm Speed 2,800 rpm Extraction nozzle diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 310 kg Dimensions L-W-H 1400 x 900 x 1650 mm - Crosscut and mitre circular saws for crosscutting operations - Double-sided mitre adjustment (60°/45°) with fixed stops - Compound cuts possible on both sides (60°/45°) with fixed stops - Stable grey cast iron construction - Precision linear ball bearing guide for the tool carriage on hardened and ground steel shafts - Manual feed - Saw blade infinitely height-adjustable - Connection for optional dust extraction Standard equipment: - 3.0 kW motor for aluminium cutting - Saw blade tiltable via handwheel and worm gear (compound cuts) - Saw blade diameter 520 mm - Saw blade arbor diameter 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic star-delta starter - Machine weight approx. 250 kg Cutting data: - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm Guolhcexaaxdjdwxsg - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM (carbide-tipped) saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, steplessly adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable via lever valve - Pneumatic saw blade mist lubrication system - Saw head tiltable from the front on both sides via hand crank - Machine stand - Powerful drive motor (3.0 kW)

Kondisi: baru, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Gslhjxabqzocdwxoug Space requirement approx. 1300 x 800 x 1600 mm - Crosscut and mitre circular saw for crosscuts - Mitre adjustment to both sides (60° / 45°) with fixed stop - Mitre cut on one side up to 45°, with fixed stop - Robust cast iron construction - Precision ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade height infinitely adjustable - Connection for optional extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x carbide-tipped circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastic - Steplessly adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: 2 vertical clamping cylinders, adjustable with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Kondisi: baru, Tahun pembuatan: 2023, BERG+SCHMID Gergaji Melingkar Aluminium Model VELOX 350, Manual, Kecepatan: 1800+3.600 RPM • Pemotongan miring kiri + kanan 45° • Pemotongan kepala miring hingga 45° (dengan pengatur) • Meja putar dengan bantalan bola • Alas mesin • Kualitas pemotongan tertinggi melalui penyerapan getaran • Pemotongan sangat halus Gslhcder Ilktjwxeug • Mulai pemotongan dan kinerja yang sangat baik • Rangka mesin dengan laci serpihan Dimensi mata gergaji: 350x32mm Aksesori tambahan seperti mata gergaji, konveyor rol, penghenti ukur, pelumasan jumlah minimal, dll., tersedia berdasarkan permintaan! Waktu pengiriman: dari gudang Waiblingen Beinstein

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 818 h, nomor mesin/kendaraan: S-MD 315, diameter mata gergaji: 315 mm, panjang pemakanan sumbu X: 100 mm, panjang umpan sumbu Y: 100 mm, panjang umpan sumbu Z: 80 mm, tebal plat aluminium (maks.): 100 mm, tinggi total: 100 mm, Rentang pemotongan baja bulat pada 45°: 80 mm, ketinggian potong (maks.): 315 mm, berat keseluruhan: 350 kg, tegangan masuk: 380 V, tahun perombakan terakhir: 2026, Rentang pemotongan baja persegi pada 45°: 80 mm, Kisaran pemotongan baja persegi pada 90°: 100 mm, diameter pemotongan: 315 mm, lubang pisau gergaji: 32 mm, daya: 380 kW (516,66 hp), Perlengkapan: Penandaan CE, Mesin Pemotong Profil dan Logam dengan Ragum Ganda Pneumatik Gujloy Aw Spehcdwxsg

Kondisi: baru, Tahun pembuatan: 2026, Aluminium Circular Saw UK 300 M, manual The UK 300 M is a manual table circular saw featuring simple and safe operation. This machine enables double mitre cuts to the right and left up to 45°. Mitre adjustment is achieved by rotating the fence. The UK 300 M boasts a compact design with user-friendly controls. The cutting action is performed manually, moving the saw blade upward through the workpiece. Material clamping is manual. A fixed guard protects the cutting area. Guslhcdwoidqahjxsg Equipment - Compact, fully enclosed design with intuitive operation - Manual clamping device - Fixed guard in the cutting area - Saw blade diameter: 300 mm - Manual feed for cutting - Mitre adjustment: left 45°, 90°, right 45° - Integrated manual length stop - Ideally suited for mobile use - Optimal for profile cutting Working sequence: 1) Set the cutting angle 2) Place the material 3) Manually clamp the material 4) Press the start button to start the saw blade 5) Perform the cut manually using the hand lever 6) After completing the cut, switch off the machine! Supplied without base frame (optional accessory)! You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, UK 300 P – Manual Table Circular Saw with Pneumatic Clamping The UK 300 P is a compact, manually operated table circular saw equipped with a pneumatic clamping system for simple and safe operation. Thanks to the double mitre cut function, cuts to the right and left up to 45° are possible. Mitre adjustment is conveniently performed by rotating the fence tray. Features: ✔ Enclosed, compact design with user-friendly controls ✔ Two pneumatic clamping cylinders for secure material fixation Gujloidqbbshcdwxeg ✔ Fixed blade guard for the cutting area ✔ 300 mm saw blade for precise cuts ✔ Manual feed for maximum control ✔ Minimal quantity lubrication for clean cutting ✔ Mist spray system for air-oil cooling Work Process: Set the cutting angle Insert and pneumatically clamp the material Activate the saw using the start button Manually perform the cut using the hand lever Switch off the machine after cutting Technical Data: ✔ Motor power: 1.4 kW / 400 V / 50 Hz ✔ Cycle control: manual (pneumatic clamping) ✔ Rated speed: 3,000 rpm ✔ Saw blade dimensions: 300 x 32 mm ✔ Machine dimensions: 700 x 500 x 900 mm ✔ Weight: 80 kg Cutting Capacity: 90° Cut: max. 100 mm / 85 x 85 mm / 120 x 50 mm / 75 mm 45° R/L Cut: max. 80 mm / 60 x 60 mm / 75 x 45 mm / 65 mm Optional Accessories: 🔹 Machine base (Art. No. 30002) 🔹 Material roller conveyor 🔹 Length stop (MD 50 series) 🔹 Material roller stand (Art. No. 10002) 🔹 High-performance lubricant for aluminum (Art. No. 80004) The UK 300 P provides a simple, safe, and flexible solution for precise cuts in various materials. Plantec Maschinen GmbH

Kondisi: baru, Saw blade diameter 350 mm Cutting capacity at 90°: round 100 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: flat 100 x 195 mm Cutting capacity at 45°: round 100 mm Cutting capacity at 45°: square 100 mm Cutting capacity at 45°: rectangular 100 x 135 mm Saw blade speed 2800 rpm Total power requirement 1.5 kW Machine weight approx. 250 kg Guolhcdeupxaxewxog Dimensions (L x W x H) 0.7 x 0.7 x 1.4 m ATTENTION: SPECIAL OFFER PRICE - Mitre left/right 45° - Fixed locking points at main mitre angles - Pneumatic double clamping device - Safety motor brake - Complete with mist spray unit and machine base

Kondisi: baru, Tahun pembuatan: 2026, Aluminum circular saw UK 350 M, manual The UK 350 M is a manual table circular saw with simple and safe operation! This machine allows for double miter cuts to the right and left up to 45°. The miter adjustment is achieved by rotating the fence jaw. The UK 350 M features a compact design with clear, user-friendly controls. The saw cut is performed manually from below into the workpiece. The material is clamped manually. A fixed guard protects the cutting area. Equipment - Compact closed design with clear, straightforward controls - Manual clamping device - Fixed guard in front of the cutting area - Saw blade diameter: 350 mm Work sequence 1) Set the cutting angle 2) Insert material 3) Manually clamp the material 4) Press the start button to run the saw blade 5) Perform the saw cut manually using the hand lever 6) After completing the cut, switch off the machine! Supplied without stand (optionally available)! You are welcome to inspect the desired unit at any time in our production/demo hall. Please feel free to contact us. Plantec Maschinen GmbH Gjlsidqk Sohcdwxeug

Kondisi: baru, Diameter mata gergaji: 400 mm Rentang pemotongan pada 90 derajat: sekitar 130 mm Rentang pemotongan pada 90 derajat: datar 160 x 130 mm Rentang pemotongan pada 45 derajat: sekitar 110 mm Rentang pemotongan pada 45 derajat: datar 110 x 125 mm Kecepatan putar mata gergaji: 3000 RPM Total kebutuhan daya: 1,75 kW Berat mesin: sekitar 140 kg Dimensi P x L x T: 1,0 x 0,65 x 1,5 m Gergaji miter aluminium - Miter kiri/kanan 45° - Perangkat penjepit ganda pneumatik - Dilengkapi dengan sistem penyemprotan kabut - Dilengkapi dengan rangka dasar mesin - Jalur rol 3 m dengan penghenti material Guelhcdweuay Dloxog - Kaki mesin

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 mm left Cutting capacity at 45 degrees: round 110 mm right Cutting capacity at 45 degrees: square 100 mm left Cutting capacity at 45 degrees: square 95 mm right Cutting capacity at 45 degrees: flat 135 x 60 mm Saw blade dimensions 350 x 32 Speed 1700 / 3400 rpm Cutting capacity at 45 degrees: round 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 210 kg Space requirement approx. 1170 x 860 x 1600 mm Description: Manual high-performance circular saw for cutting from 45° right to 45° left in aluminium and light metal alloys, with 2 speeds Equipment: - With pneumatic clamps - Saw head can be tilted 45° to one side - Heavy cast iron construction - Ensures vibration-free operation and maximum precision - Head can be additionally tilted up to 45° - Powerful two-speed drive with double V-belts - Large bearing-mounted turntable - Lubrication system with mechanical diaphragm pump - Suction connection for chip extraction Scope of delivery: - Adjustable length stop 600 mm - Tool kit - Operating instructions with wiring diagram - Lifting eyes for transportation * Machine is supplied without saw blade Optional accessories: - Including base frame Guslhexaai Nscdwxjg

Kondisi: baru, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 110 mm Cutting range at 90° (flat): 200 x 88 mm Cutting range at 45° (round): 115 mm Cutting range at 45° (square): 110 mm Cutting range at 45° (rectangular): 150 x 80 mm Total power requirement: 1.5/1.8 kW Machine weight approx.: 0.22 t Dimensions (L x W x H): 0.7 x 0.9 x 1.9 m ATTENTION: SPECIAL PROMOTIONAL PRICE!!! - Mitre cutting left/right 45° - Head tilting cuts up to 45° (bevel cuts) - Pneumatic double quick-release vices Vices close automatically when lowered Golhcdjd Iin Dowxoug - Ball-bearing table - Machine base - Powerful and high-performance - High-quality construction

Kondisi: baru, Tahun pembuatan: 2026, The UK-350-P is a manual table circular saw featuring straightforward and safe operation! This machine enables double mitre cuts to the right and left up to 45°. Mitre adjustment is made by rotating the stop jaw. The UK-350-P boasts a compact design with clear, user-friendly controls. Sawing is performed manually from below into the workpiece. The material is pneumatically clamped. A fixed guard protects the cutting area. Features • Precision aluminium circular saw • Two-hand safety control system • Mitre adjustment: left 45º / 90º / right 45º • Max. cutting height: 125 mm • Manual saw blade feed, adjustable • Includes 2 vertical pneumatic clamps • Ideal for profile cuts • Includes maintenance unit with pressure regulator • Ergonomically positioned control panel Guslsgcbuwshcdwxeg • Adjustable stop rail for slotting operations Supplied without base frame (optional)! You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us to arrange an appointment. Plantec Maschinen GmbH