Beli Mesin pres pelurus & mesin pres tekuk bekas (76)

Kondisi: baru, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Minimum bending radius: 190 mm Round steel 18.0 mm Machine weight: approx. 33.0 kg. Features: Hnodpfx Aoxcux Rog Rji - For precise cold and hot bending of flat, round, and square steel - Robust design for bench mounting - Infinitely adjustable bending stop with locking pin - Equipped with quick-release eccentric clamp for efficient operation - Readable bending angle up to 120° - High repeat accuracy thanks to bending angle stop - Ideal for repair shops and metalworking shops Bending capacity cold / hot Flat steel 100 x 5 mm 100 x 15 mm 65 x 10 mm 75 x 20 mm Round steel 18 mm 27 mm Square steel 16 x 16 mm 25 x 25 mm Angle steel 60 x 8 mm 100 x 12 mm Scope of delivery: - Sharp/Round bending plate - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric fastener - Material stop

Kondisi: bekas, Technical Details: Pressure: 200 t Stroke: approx. 200 mm Table size: L:1200 x H:450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press, Eccentric-type Bending Machine - Jaw holder (LxW): 1200 x 220 mm - Jaw adjustment: 200 mm travel Hnsdpfx Asu Nfrpog Roi - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, inserts, stop angles, and scribers as per inventory.

Kondisi: baru, Tahun pembuatan: 2024, it_en_001 Hnjdpfefh R N Dsx Ag Roi

Kondisi: baru, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH RAPID FUNCTION, 20 TON CAPACITY Maximum Capacity: 20 tons Approach Speed (rapid): 1,700 mm/min Hnjdpfervz A Sex Ag Roi Working Speed (slow): 440 mm/min Cylinder Stroke: 300 mm Cylinder Rod Diameter: 45 mm Rod End Diameter: M14 Tank Capacity: 30 liters Maximum Pressure: 350 bar Voltage: 400 V Frequency: 50-60 Hz Motor Power: 1.5 kW Maximum Absorbed Current: 3.8 A Weight: 200 kg

Kondisi: baik (bekas), Profile bending machine, bending machine, flat bar bender, horizontal bending / straightening press - Bending / straightening press: hydraulic profile bending machine - Base frame: heavy-duty construction, mobile Hodpjt Hmhlefx Ag Reni - Hydraulic unit: unfortunately without type designation - Piston rod: Ø 55 mm / stroke: 200 mm - Individual components: see photos - Overall dimensions: 1180/1060/H1000 mm - Weight: 445 kg

Kondisi: bekas, Tahun pembuatan: 2008, Detail teknis: Tekanan: 6 t Langkah: 1020 mm Kebutuhan daya total: 3,5 kW Hanya dapat meluruskan di antara ujung-ujungnya Hedpfjw Ng D Tsx Ag Roni

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.900 mm, panjang meja: 10.000 mm, lebar total: 3.660 mm, panjang total: 10.200 mm, tinggi meja: 900 mm, lebar meja: 2.545 mm, gaya penekanan: 100 t, berat keseluruhan: 26.000 kg, kecepatan operasi: 9 mm/dtk, kecepatan mundur: 14 mm/dtk, tekanan: 320 batang, daya: 4 kW (5,44 hp), MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT SHEETS TECHNICAL DATA Force T 100 Motor power kW 4 Main disconnect motor capacity kW 0.37 Bridge travel motor capacity kW 0.75 Working speed mm/s 3 Approach speed mm/s 9.2 Return speed (Velocidad retorno) mm/s 14.4 Max. pressure Bar 320 Work area available mm 10,000 x 2,545 Max. ram stroke mm 450 Max. open height mm 600 Side movement mm 2,120 Gantry travel mm 9,140 Working height mm 900 Overall length mm 10,200 Overall width mm 3,660 Height mm 2,900 Weight kg 26,000 The TL-100/10000E hydraulic press is part of the T/NC series and was specifically designed for straightening welded structures and cut sheet metal. As with all of our hydraulic presses in this series, its construction simplifies the loading and unloading of large workpieces. Thanks to the cylinder’s lateral movement and the bridge’s longitudinal travel, it is possible to access various pressing points without having to move the workpiece. The machine conforms to all essential safety and health requirements according to CE regulations. FRAME AND TABLE • Electro-welded frame made exclusively of S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Designed and calculated using finite element software. Hnjdpfx Aewkvmnsg Roi • The longitudinal movement of the bridge is achieved via a frequency inverter and toothed belt drive. • The head’s lateral movement is motorized. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with honed bore, chrome-plated piston, and maintenance-free anti-wear guides. • Fitted with a removable and interchangeable pad to prevent piston wear, machined at the end to suit tooling. • Equipped as standard with a cylinder anti-rotation device and a calibrated front face with limit switches to set the ram stroke. • Motorized hydraulic unit with two speeds and automatic high-speed shut-off. • Cylinder decompression valve. • Pressure regulator. • Glycerin-filled pressure gauge with tonnage indication. ELECTRICAL INSTALLATION AND SAFETY • Control panel includes a selector switch to choose between manual and semi-automatic operation. • There is also a selector switch to choose between fast approach and slow working speed. • Operation is via a pendant control with emergency stop and low-voltage control circuit. • Includes a cycle confirm button.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SH-250, tinggi total: 1.700 mm, lebar total: 2.000 mm, panjang total: 3.000 mm, gaya penekanan: 250 t, kecepatan operasi: 4 mm/dtk, kecepatan mundur: 8 mm/dtk, panjang langkah: 450 mm, Perlengkapan: dokumentasi / manual, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal hydraulic ram press is designed with a range of three different force ratings from 100 up to 250 tonnes. The horizontal hydraulic presses are especially designed for straightening and bending operations on profiles, bars and beams. The machine’s horizontal design allows easy handling of large size beams and profiles. The latest generation HS series horizontal hydraulic press has evolved towards versatile use, allowing the integration of a wide variety of tooling options. These machines operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES Hsdewk Hkqjpfx Ag Rjni The SH series horizontal straightening hydraulic presses feature a

Kondisi: bekas, Tahun pembuatan: 1991, de-001 Hnedpfx Ajx Ni E Isg Rsi

Kondisi: baik (bekas), Tahun pembuatan: 2007, Merek: SCHIAVI Model: HFBs 100/3 Gaya nominal: 100 ton Hnsdpfjxaz Igsx Ag Rji Panjang meja: 3110 mm Lebar meja kerja: 90 mm Tinggi kerja tanpa tambahan: 910 mm Jarak maksimum antara meja: 450 mm Langkah maksimum nominal: 250 mm Kedalaman leher angsa: 405 mm Jarak antara dudukan: 2700 mm Tekanan maksimum: 303 MPa Kapasitas oli: 126 dm³ Panjang maksimum (ruang yang dibutuhkan): 4000 mm Daya motor: 7,5 kW

Kondisi: baru, Condition: new Delivery time: approx. 4 months from order Country of origin: Italy Price: €66,700 Lease rate: €1,260.63 Pressing force: 150 t Stroke: 500 mm Table: 1,550 x 2,000 mm Installation height: 800 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Length: 2,350 mm Width: 2,000 mm Height: 2,500 mm Weight: 4,100 kg Cylinder fixed or horizontally movable Clear stand width: 1,550 mm Horizontally movable cylinder: 1,000 mm Hydraulically movable frame: 1,300 mm Hjdpfswirpiex Ag Rjni Horizontally movable cylinder Hydraulically movable frame Operation via hand lever and control panel Equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: Work table welded to the subframe, with drilled surface Control panel on swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Wireless control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8, or 10 pcs.) Anti-twist device for the ram 2 speeds for frame and cylinder movement Oil cooler and decompression valve

Kondisi: baru, Tahun pembuatan: 2025, OMCN P30/SA hydraulic press with dual-speed hand pump, 30 tons. The OMCN P30/SA hydraulic press features a manual drive via a dual-speed hand pump and a robust base frame that ensures maximum stability with minimal floor space requirement. Thanks to the perforated frame, the support base can be height-adjusted in 9 different positions, allowing the press to handle workpieces of various sizes. The integrated winch facilitates easy and quick adjustment of the worktable height. + Rapid approach + Precision Hsdpfxsklyvts Ag Roni Essential in workshops and industrial settings, this press is ideal for metal pressing tasks such as assembly operations for mechanical components, fitting of bearings or pulleys onto shafts. Manufactured in Italy and CE certified, the press is constructed from durable materials to ensure long-term reliability, and it can generate a pressing force of 30,000 kg. Dimensions: 2180 x 1300 x 600 mm Weight: 280 kg Pressing force: 30 tons Distance between uprights: 695 mm Piston stroke: 190 mm Piston diameter: 60 mm

Kondisi: baru, Tahun pembuatan: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Hodpfjfh R Nysx Ag Rsni Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with fast motor, equipped with a pressure gauge and double-speed hydraulic unit, featuring a vane pump for rapid approach and retraction and an axial piston pump for the working phase. Fitted with a pressure adjustment valve and a three-position control distributor (advance – neutral – return). The machine is supplied with oil. Equipped with a winch for raising the work table. The ram is made of special treated and chromed steel. The machine is equipped with two-hand control and simultaneous operation in accordance with current regulations. Complete with protective panels at the rear and sides. CE certified with full electromagnetic compatibility. Piston stroke: 310 mm Clearance: 1,010 mm

Kondisi: sangat baik (bekas), Data teknis: Gaya tekan: 500 ton Jarak antara kolom: 4300 mm Dimensi (P x L x T): sekitar 5100 x 900 x 4300 / 5600 mm Hjdpfxsxgblle Ag Rsni untuk transportasi (dua bagian): Dimensi: 2 x 5.100 x 900 x 3.050 mm Berat: 1x 15.700 kg – 1x 13.200 kg (total 28.900 kg) Penjual tidak bertanggung jawab atas kesalahan penulisan atau transmisi data. Mesin dijual dalam kondisi visual, teknis, dan keausan sesuai usianya; mesin bekas dijual tanpa jaminan apapun.

Kondisi: diremajakan ulang (bekas), PORTAL-RICHTPRESSE DRUCKKRAFT: 450 t Hnedpfx Agsfcnu Ij Rsi HUB: 50 mm LICHTE WEITE: 1.000 mm ARBEITSBEREICH: LÄNGE: 5.200 mm BREITE: 2.300 mm HÖHE: 1.000 mm GEWICHT: 45.000 kg SCHRAUBENABSTAND LINKS-RECHTS: 1.000 mm

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Total power requirement: 15 kW Machine weight approx.: 4 t Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Hnedpfst Hw Amox Ag Rji Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Hjdot Hwwdepfx Ag Rjni Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: sangat baik (bekas), Pressure 6.3 t Reach 200 mm Stroke 200 mm Maximum installation height 500 mm Table clamping surface 450 x 420 mm Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.6 x 2.0 m Two-hand control, various attachments Hnsdpfx Agowuu A Ao Roi

Kondisi: baik (bekas), TABLE PRESS WITH POWER UNIT Hnodpfok Adfnex Ag Rei

Kondisi: baru, Pressing force 500 t Clearance between uprights 600 mm Stroke 600 mm Table area 3500 x 1500 mm Distance from cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision milled with a CNC milling machine - Chrome-plated cylinder - Working plate with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold block according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement by remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button Hnjdsfv Awhopfx Ag Roi - Safety cable with switch all around the press 4. TRANSPORT AND INSTALLATION – Price includes transport, installation and training at the customer’s plant. – Hydraulic oil is not included in the price. – All handling costs (e.g. crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine comes with a 2-year manufacturer’s warranty. – This warranty includes the supply of all spare parts required for repair and servicing the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged by improper use.

Kondisi: baru, Pressure 300 t Working speed 3–8 mm/sec Stroke 500 mm Return speed 15 mm/sec Hodpfevxw Hmex Ag Rsni Table size 3000 x 1500 mm Tank capacity 45 l Travel x / y 2600 x 1000 mm Passage 500 mm Total power requirement 18.5 kW Machine weight approx. 18 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are machined precisely on a CNC milling machine - Chromed cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydrapack or Badeston hydraulic valve - Hydraulic manifold block according to EN standards - Hydraulic oil tank (xxx liters) - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z axis movement by remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive and EN ISO 16092-01, 16092-03 - Two-hand control buttons - Reset and emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION - The price includes transport costs, installation, and training at the customer’s site. - Hydraulic oil is not included in the price. - All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer’s warranty. - This warranty covers the supply of all spare parts required for repair and service calls for the machine. Damaged parts are to be returned to the manufacturer after replacement with new parts. - This warranty does not cover parts damaged due to improper use.

Kondisi: baru, Tahun pembuatan: 2025, Hydraulic horizontal straightening and bending press - Manufacturer: ZOPF - Model: T 800 - Pressing force: 80 tons - Equipped with semi-automatic control Control system (99 programs, each with up to 16 steps) Includes bending mandrel (without punch) Includes tool adapter for dies and foot pedal - Continuously adjustable stroke setting: 0–300 mm - Adjustable working speed Maximum working stroke: 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure Hnjdsd A Nc Dopfx Ag Rei - Maximum tool height: 300 mm - Motor power: 7.5 kW - 400 Volt, 50 Hz, 3-phase - Working height: 940 mm - Closed table - Interchangeable wear plate - Weight: 2,100 kg - Bending capacities: Flat material: 300 x 32 mm with Vmax Round tube: 3/8" – 3"

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with straightening beam, 1500 mm length - Pressing force: 50 t - With semi-automatic control Control unit (99 programs, each with 16 steps) Incl. bending pin (without punch) Incl. tool holder for dies and foot pedal - Infinitely variable stroke adjustment 0-300 mm - Adjustable working speed Working stroke max. 10 mm/sec Hedpfx Aedk H A Ieg Rsni Return stroke 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 900 mm - Enclosed table - Replaceable wear plate - Weight: 1,300 kg - Bending capacities: Flat bar: 300 x 15 mm Flat bar upright: 60 x 15 mm Round pipe: 3/8" – 2 1/2"

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 700 mm, gaya penekanan: 16 t, tinggi kerja: 1.050 mm, tinggi pusat: 1.050 mm, Mesin perata otomatis, telah diperbarui secara mekanis, dilengkapi kontrol baru SIMATIC S7-1500, Drive Controller CPU 1504D TF. Jarak puncak maksimum 500 mm, gaya perata 16 ton, langkah perata 20 mm, langkah bebas 95 mm, tinggi kerja 1050 mm, konsumsi daya 10 kVA, konsumsi rata-rata 1,3 kW. Opsi: Mesin dapat dilengkapi dengan konveyor balok angkat (melalui mesin) serta sabuk pemasukan/pengeluaran sesuai permintaan pelanggan, juga dengan pagar pengaman. Saat ini mesin dilengkapi dengan 1 area perata, perluasan dimungkinkan. Hodpfxsxldiqe Ag Rsni

Kondisi: bekas, Tahun pembuatan: 1989, Sheet width: 150 mm Number of straightening rollers: 4 Hjdpfocxxvmox Ag Rsni Number of feed rollers: 2 front + 2 rear Roller diameter: 60 mm Required space approx.: 1.8 x 0.7 x 1.4 m