Beli Mesin pembengkok horisontal 0–25 t bekas (58)

Kondisi: baru, Tubend Horizontal Bending Machine HP 20 Description - Pressure: 20 t - Stroke: 200 mm - Max. tool height: 200 mm Prodoi Elvhspfx Ab Ijd - Flat bar on edge: 200 x 12 mm - Working speed: 10.0 mm/sec - Return speed: 10.0 mm/sec - Table: 550 x 1100 mm - Total connected load: 2.2 kW - Motor: 400 Volt 50 Hz - Weight: 640 kg - Dimensions (LxWxH): 1220 x 600 x 1220 mm - Oil capacity approx.: 12.0 l Features: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel - Machine constructed from hardened and ground forged steel - NC touch screen control - 1x tool set - Double foot switch

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm—either stationary or directly at the assembly site. A robust three-phase motor and precision gearbox ensure powerful drive performance. Position detection directly on the bending axis provides optimal bending accuracy. Setting the bending angle is quick and easy via a user-friendly, menu-driven touchscreen interface, ensuring even more intuitive operation. For more complex bending operations, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction controller allows variable adjustment of the bending speed for forward and return movement, and features a programmable overbend function to compensate for material springback. Utilizing four material characteristic curves, the system automatically overbends the material to the required bending angle, delivering highly accurate bending results. The “stationary tube, rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to produce bends with minimal deformation in materials such as stainless steel and copper. With the PB20 profile bending attachment, flat, square, and round bars can be easily bent. The KBV small-radius bending device allows for extremely tight bend radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Min./max. bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with 0.1° angle adjustment • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Roller bender RB43 – mounts on the hex shaft of the bending axis. By switching to continuous bending mode, the bending system acts as a drive unit. • Small-radius bending device KBV • Special tools available on request OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and information session at your premises • Advice and processing of leasing/financed purchases • Trade-in of your current machine Pjdeng Ax Sspfx Ab Ierd • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 480x1060 mm Working height: 900 mm Oil tank: 10 liters Maximum workpiece height: 200 mm Flat capacity: 200x12 mm Tube capacity: 48x4.0 mm *not with standard tooling - Digital limitation of stroke and return. Psdpfxehgib Ne Ab Isrd - NC control. - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows quick tool changes without loss of precision - The hydraulic cylinder is mounted on the heavy-duty machine table to prevent any loss of accuracy even under heavy load. - With the universal tool holder and various tools, you can work extremely flexibly.

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values Psdong A R Sjpfx Ab Iord • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop Pjdpfeng Amkox Ab Ierd OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: The compact bending machine enables precise and repeatable bending up to an external diameter of 100 mm, both in stationary operation and directly at the installation site. Transport can be carried out using a pallet truck or with the optionally available rollers. A robust three-phase motor and precision gearbox ensure powerful drive performance. The machine stands out due to its compact and slim design as well as the exceptionally open bending area. Direct position detection on the bending axis guarantees optimal bending accuracy. Bending angle adjustment is quick and simple via a user-friendly, menu-driven interface available in 14 languages with touchscreen control, ensuring even more intuitive operation. Up to 100 bending programs can be stored for complex bending tasks, each supporting a sequence of up to 8 bends per geometry. The multifunctional control system allows variable adjustment of bending speed for forward and reverse motion, with a parameterizable overbending function to compensate for material springback. Using the four material characteristic curves, the machine automatically overbends the material to the required angle, thus ensuring highly precise results. The “stationary tube and rotating tool” principle minimizes the machine’s footprint. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to make bends with minimal deformation, for example, in stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square, and round iron profiles can be bent with ease. The KBV small radius bending device attachment allows extremely tight bending radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Serpentine bending Prodpfx Abondk N Aj Ied • Prototyping • Plumbing and heating installations • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase current 400 V • Bending radius up to 500 mm • Multifunctional machine control, bending angle setting (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii from 45 mm, incl. 40 mm hex shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small bending device • Special tools according to specifications • Software adaptations for special applications OUR SERVICE: • You are welcome to visit our demo room for test production • Consultation and information meeting at your site • Consulting and handling of lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction Prodpfx Abonfvx No Iod • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location Pjdpfx Abenh R Ekj Ijrd • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility