Beli Mesin press briket bekas (101)

Kondisi: baik (bekas), Used, good condition. Technically inspected used machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (for example for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optional production of short briquette tablets possible Technical data: Throughput rate up to max. 750 kg/h (depending on material) (e.g. sawdust with a bulk density of 250 kg/m³) An exact statement on throughput can only be made after testing with your material, as this may vary significantly depending on bulk density. Customs tariff number: 84793010 Briquette diameter: 65 mm including 2 m press channel Gusdpfx Aofmqq Ejg Rek Main motor power: 37 kW Feed screw gear motor: 2.2 kW Compactor screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with operating hour counter in switch cabinet Machine bears CE mark Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3800 kg Options at extra cost: Temperature control unit for press tools For maintaining optimal temperature and briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch. Wired ready for operation – essential for functionality including corresponding control system + €7,850 net Guillotine or tablet breaker, For cutting briquettes to length + €6,900 net Connection to compressed air required! Silo for MAP series + €19,940 net – Storage silo above machine – Capacity approx. 6 m³, robust steel construction with agitator discharge and level indicator. Transport pipe / cooling section (nominal size: 4x2m) Every 2 meters €990 net Assembly / commissioning (nominal: approx. 2–3 days on site) Billed by time and material. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Saturday/night hours: 50% surcharge Sunday and holiday hours: 100% surcharge Per diem per technician: depending on country Per car/van and driven kilometer: €0.98 / km Travel and accommodation: reimbursed based on receipts or by flat rate, borne by the client. Testing with customer material: (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for raw material: – Moisture content (atro) must be at least 6% and no more than 15% – Chip length max. 18 mm – Installation temperature: heated space, at least +5°C – Feedstock must be free of metals and mineral impurities. Damage to press tools and/or increased wear may otherwise occur.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 109, diameter briket: 80 mm, berat keseluruhan: 1.450 kg, TECHNISCHE DETAILS Gusdexyi Ihepfx Ag Rek

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 37.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1653, lebar total: 2.000 mm, tinggi total: 2.100 mm, panjang total: 3.000 mm, berat keseluruhan: 5.500 kg, Hydraulic system: - Power-regulated axial piston double pump  Max. operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm ● Motor is an energy-saving type, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 V DC - Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5 µm filter unit, 2.2 kW drive - Large double return filter integrated in the tank, 10 µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch in the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 V DC - Freely programmable controller (PLC) SIEMENS S7-200 - With Siemens TP 177B operator and display panel • Display and modification of operating states and values • Operation input • Fault message display - Automatic start/stop control via light barrier integrated into the feed hopper - All initiators operate contact-free - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with an inlet area of 800 x 400 mm - Heavy-duty sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, 0.55 kW drive - Feed screw with 1.5 kW drive - Feeding time automatically controlled via PLC Pre-compactor: Vertical arrangement, hydraulically driven. Gedpfexxk D Uex Ag Rsuk - Pre-compaction pressure adjustable via TP 177B - Control system is dust-proof, using the patented RUF path measurement method Main compactor: Horizontally arranged, hydraulically driven. - Press pressure adjustable via TP 177B, up to 300 bar - Hydraulic cylinder 350, with a pressing pressure up to 300 tons Pressing capacity: - Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 – 110 mm; depends on the settings, type, and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 4.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BP 500 A, DESCRIPTION BRIQUETTING PRESS The press is designed for compressing secondary raw materials into briquettes. (Briquette shape: rectangular) Technical data of the press: Dimensions: - Length: 1800 mm (during transport: 2100 mm) - Width: 1800 mm (during transport: 2000 mm) - Height: 1900 mm (during transport: 2200 mm) - Net weight: 2945 kg Power supply: - 380 V, 50 Hz, 33 kW, 70–100 A Throughput: - 450 kg/h (+/-50 kg depending on raw material type and fraction) Noise level: - A-weighted sound pressure level at the operator’s workstation: 77.8 dB +/-5 dB Compression pressure: - Minimum: 1000 kg/cm² - Maximum: 1700 kg/cm² Hydraulic pressure: - Max. 300 bar Raw material moisture content: - Not more than 14% Guedpoxmav Nsfx Ag Rek Briquette dimensions: - Width: 150 mm - Thickness: 60 mm - Length: 40–105 mm Permitted ambient operating temperature: - From -20°C to +35°C (with additional cooling system: up to +50°C) The press consists of: Electrical system – controls the hydraulic system of the press. The system features four electric motors: 1. Main motor: 30 kW – drives the main hydraulic pumps 2. 1.1 kW – drives the hydraulic oil cooling pump 3. 0.55 kW – drives the oil cooler ventilation fan 4. 1.5 kW – drives the sawdust feed auger The operation of motors and hydraulic valves is controlled by a microprocessor with expansion modules via contactors and intermediate solid-state relays. For visualization and parameter adjustment, there is a liquid crystal display with control buttons. Hydraulic system – manages hydraulic cylinder operation via pumps, high and low-pressure valves, electromagnetic hydraulic valves, and hoses. There are three hydraulic cylinders: the main cylinder for sawdust compression, a vertical cylinder for initial sawdust compaction, and the form cylinder for pushing finished briquettes out of the mold. The system also includes an oil cooling system with a pump and air cooler. Oil filtration is provided by a main high-capacity filter, a cooler filter, and a fine filtration filter. The raw material feed is performed by an integrated feed hopper. Material entering the hopper is intermittently mixed to prevent bridging. The mixer is powered by the auger’s gear motor via a chain. The auger cyclically feeds material into the vertical cylinder shaft. The hopper includes two raw material level sensors (lower and upper). If the hopper is enlarged, the sensors can be repositioned as needed. Control – dual operational modes: manual and automatic. All control equipment is integrated into the electrical cabinet. Automatic mode is intended for normal press operation without operator intervention. Manual mode is intended for setup, troubleshooting, cylinder repositioning, and emergency situations. Operation is facilitated by the display on the electrical cabinet door, allowing parameter viewing and adjustment, and displaying press status and error messages.

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.000 mm, tinggi total: 1.800 mm, panjang total: 5.500 mm, berat keseluruhan: 6.500 kg, jenis arus masuk: tiga fasa, daya: 150 kW (203,94 hp), Stetson Ross 6-12-C1 mesin planer/moulding Dijual mesin pengolah kayu Stetson Ross 6-12-C1 yang terpercaya. Konstruksi kokoh, cocok untuk pekerjaan berat dan intensif. Sangat ideal untuk pemotongan, pemahatan, pemrosesan papan, kayu gelondongan, serta permukaan dalam jumlah besar. Mesin berfungsi dengan baik, dirawat secara teknis, dan siap pakai. Gjdexvn Tbopfx Ag Rsuk Ringkasan peralatan: Model: Stetson Ross 6-12-C1 Aplikasi: planer/profil kayu Konstruksi industri yang kuat Operasi mulus dan kualitas pemrosesan tinggi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 872 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 910-2265, lebar total: 1.350 mm, tinggi total: 1.410 mm, panjang total: 1.900 mm, diameter briket: 60 mm, berat keseluruhan: 750 kg, jenis arus masuk: tiga fasa, arus masuk: 16 A, frekuensi input: 50 Hz, kapasitas tangki oli: 100 l, tekanan: 160 batang, daya: 5,5 kW (7,48 hp), panjang bukaan pengisian: 1.044 mm, lebar bukaan pengisian: 1.044 mm, Diameter briket (mm): 60 Motor hidrolik (kW): 5,5 Pengaduk permanen (kW): 0,5 Gusdpfx Agsxwm Uto Rok Motor ulir (kW): 0,6 Kapasitas oli (sekitar l): 100 Berat (sekitar kg): 750 kg

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Guedeffh Atepfx Ag Rek Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2025, Hydraulic briquetting press with 4 kW main motor. 50 mm diameter briquette. Capacity: 30–50 kg/hour. 1 m³ hopper, oil cooler. Gusdef Hmi Espfx Ag Rjk

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, diameter briket: 60 mm, Refurbished machine suitable for smaller, single-shift joinery workshops. It offers a robust construction with good performance. Maximum briquette output: 70 kg/hour. Year of manufacture: 2003. Very good and well-maintained condition. Original warranty and post-warranty service directly from our company. Professional hydraulic briquetting presses PRODECO are ideal for small and medium-sized woodworking operations. They enable efficient processing of waste into environmentally clean and high-calorific fuel without the use of binders. They are characterized by compact dimensions, low energy consumption, and easy operation. Technical data: Motor power: 5.5 kW Briquette output: 35 to 70 kg/hour depending on material Briquette diameter: 60 mm Briquette stroke max.: 60 mm (so-called endless briquette) Hopper diameter: 1000 mm Weight: 650 kg Machine dimensions: 1170 x 1700 x 1510 mm Features: - Hydraulic unit with 7 pressing cycles/min Guedpovva Rpefx Ag Rok - Dual manometer for improved pressure control - Level sensor for briquetted material - Oil level sensor - Inspection window - CE safety standard - The processed material moisture content must not exceed 18% The machine is refurbished, adjusted, and tested.

Kondisi: baik (bekas), Tahun pembuatan: 2013, jam operasional: 37.400 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2110, lebar total: 2.000 mm, tinggi total: 2.100 mm, panjang total: 3.000 mm, berat keseluruhan: 5.500 kg, Hydraulic system: - Power-regulated axial piston double pump  Max. operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm ● Motor is an energy-saving type, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 V DC - Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5 µm filter unit, 2.2 kW drive - Large double return filter integrated in the tank, 10 µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch in the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 V DC - Freely programmable controller (PLC) SIEMENS S7-200 - With Siemens TP 177B operator and display panel • Display and modification of operating states and values • Operation input • Fault message display - Automatic start/stop control via light barrier integrated into the feed hopper - All initiators operate contact-free - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with an inlet area of 800 x 400 mm - Heavy-duty sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, 0.55 kW drive - Feed screw with 1.5 kW drive - Feeding time automatically controlled via PLC Gedpfoxwiziex Ag Reuk Pre-compactor: Vertical arrangement, hydraulically driven. - Pre-compaction pressure adjustable via TP 177B - Control system is dust-proof, using the patented RUF path measurement method Main compactor: Horizontally arranged, hydraulically driven. - Press pressure adjustable via TP 177B, up to 300 bar - Hydraulic cylinder 350, with a pressing pressure up to 300 tons Pressing capacity: - Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 – 110 mm; depends on the settings, type, and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2024, jenis perlindungan (kode IP): IP54, Mesin Briket RUF 400 GARIS PRODUKSI BRIKET LENGKAP TERSEDIA UNTUK DIJUAL: Pengering serbuk gergaji tipe drum Auger pengumpan Konveyor sabuk – 2 unit Gedpoxu Ryusfx Ag Rsuk Separator dengan hopper Konveyor sekrup – 6 unit Tangki penyimpanan serbuk basah Tangki penyimpanan bahan bakar Boiler limbah kayu Penghancur limbah kayu Kipas ekstraksi dengan siklon Mesin pengemas dengan kompresor Foto tambahan dan informasi tersedia untuk permintaan yang serius.

Kondisi: baik (bekas), Mesin Pembuat Briket Comafer Dinamic 85 Gedpexuq E Rsfx Ag Reuk Daya motor: 5,5 kW Diameter briket: 65 mm Kapasitas: sekitar 50 kg/jam Diameter tangki: 90 cm Berat: sekitar 900 kg Mesin berfungsi dengan baik, dapat diuji sebelum pembelian.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Mesin Press Briket untuk Kayu atau Material Sejenis Kayu Kapasitas: sekitar 80 - 100 kg/jam Briket: silinder 60 mm Motor: 7,5 kW Pemanas oli 6374 jam kerja Dimensi: sekitar 2150 x 1700 x 1400 mm Ukuran tangki: 1400 x 1400 x 920 mm Opsional: Unit ekstraksi debu dapat dipasang sebagai hopper tambahan. Gujdpfx Aew Hpizsg Rjk Persyaratan: Bahan baku sebaiknya berupa serpihan dengan panjang kurang dari 25 mm Kadar air 6-12% ATRO Mesin cocok untuk operasi tidak kontinu (mis. briket selama 2 jam, istirahat 1 jam, dst.) Jika mesin akan dioperasikan lebih dari 2 jam terus menerus, sistem pendingin opsional harus dipasang.

Kondisi: baru, Tahun pembuatan: 2025, Kleine hydraulische Brikettierpresse. Der Hauptmotor hat eine Leistung von 4 kW, der Brikettdurchmesser beträgt 50 mm. Die Presskapazität liegt bei 30–50 kg pro Stunde. Die Maschine ist neu und verfügt über ein CE-Zertifikat. Optional ist ein Ölkühler erhältlich. Für weitere Informationen besuchen Sie unseren YouTube-Kanal, unsere Webseite oder unsere Facebook-Seite. Gusdsfk N Tpepfx Ag Rsk

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Briket press yang masih dalam kondisi baik dengan filter tambahan untuk penggunaan dalam ruangan (tanpa pelapis pelat logam). Filter telah diuji BIA. Motor hidrolik 7,5 kW. Pipa ekstraksi juga dapat disertakan jika diperlukan. Guedsxuzp Hopfx Ag Rok

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 990-185, berat keseluruhan: 4.500 kg, arus masuk: 80 A, frekuensi input: 50 Hz, tegangan masuk: 400 V, kapasitas tangki oli: 1.000 l, tingkat kebisingan: 83 dB, Perlengkapan: henti darurat, unit pendingin, de-001 Gsdsxtm Ilepfx Ag Rjuk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Mesin briket Ruf model UMP BP600. Mesin briket dalam kondisi baik. Godpfx Agextf S As Rsuk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Gsdpfx Aswrp Emog Rouk Equipment shown in the last 6 images.

Kondisi: baik (bekas), refurbished_used_machine basic_machine_starts_at_a_price_of_147700_euros_net *Options_available_at_extra_cost_see_below with_full_1_year_warranty ready_for_delivery_approx_16_weeks_after_order Technical_data: Throughput_capacity_up_to_a_maximum_of_1200_kg/h_(depending_on_m aterial) (e.g._sawdust_with_a_bulk_density_of_180_kg/cbm) Briquette_diameter:_75_mm including_2_m_press_channel Main_motor_power:_45_kw Feed_screw_gear_motor:_2_x_2.2_kw Compressor_screw:_2_x_5.5_kw Distributor_screw:_2.2_kw Hydraulic_pump_motor:_0.37_kw Total_connected_load:_65_kw Control_panel_with_plain_text_display_for_operating_states and_load_display_for_main_drive_and_feed_screws PLC_control_Siemens_S7/300_with_operating_hours_counter_in_contr ol_cabinet Machine_has_CE_mark Automatic_start/stop_function_for_the_machine Dimensions:_3100x860x1800_mm_(LxWxH) Weight:_4500_kg Options: Silo_for_MAP_series_(suitable_only_for_one_press_of_type_MAP_120 0) -Storage_silo_above_the_machine- Capacity:_approx_6_cbm,_solid_steel_construction_with_agitator_d ischarge_and_level_sensor. 19,700_euros_net_plus_VAT -Temperature_control_unit_for_press_tools for_maintaining_temperature_for_optimal_briquette_quality. Temperature_controller_for_pump,_cooling_unit,_fan,_pressure_swi tch Wired_ready_to_connect_-_mandatory_for_operation including_matching_control_unit 7,850_euros_net -Guillotine_for_cutting_briquettes_to_length Compressed_air_connection_on_site_required 6,940_euros_net_plus_VAT -Conveying_line_/_cooling_section_(nominal_value:_4x2m) Per_2_meters:_990_euros_net Installation_/_commissioning_(nominal_value_per_press:~2-3_days_ on_site) Based_on_actual_hours,_separately_billed._The_following_rates_ap ply: Service_technician/mechatronics_per_installation_and_travel_hour :_129.00_euros Overtime:_25%_surcharge Saturday_and_night_hours:_50%_surcharge Sunday_and_public_holiday_hours:_100%_surcharge Daily_allowance_per_fitter:_depending_on_country Per_car/van_kilometer:_0.98_euros/km Travel_and_accommodation_on_receipts_or_flat-rate_to_be_borne_by _the_customer. Godpfxs E Dqus Ag Reuk Test_with_customer's_own_material:_(by_arrangement,_up_to_max_75 0_kg)_-_1,970_euros_net_fixed ---- Raw_material_requirements: - Moisture_content_(atro):_minimum_6%_to_maximum_18% - Maximum_chip_length:_20_mm - Installation_temperature:_heated_room_at_least_+5°C - Feed_must_be_free_of_metals_and_mineral_contaminants._Damage_to_ press_tools_and/or_increased_wear_may_result.

Kondisi: baru, 20-26-537/4 FALACH hydraulic briquetting press (baru) Gedpfx Agoxrn Uwj Rsuk Tipe: CUBE 20 Diameter briket: 30 x 30 mm Kapasitas tekan: 10-25 kg/jam Panjang briket: sekitar 6-50 mm Volume hopper: 0,28 m3 Daya motor pompa: 2,2 kW Konsumsi daya: 1,1 kW/jam Tegangan dan arus masuk yang diperlukan: 3x400V, 16 A Pendingin oli: tidak ada Operasi: kontinu Pembalikan otomatis roda penyangga: tidak ada Pemutusan otomatis: tidak ada Kadar kelembaban maksimum: 15 % Berat jenis briket: 900-1100 kg/m3 Tingkat kebisingan maksimum: 62 dB Dimensi transportasi: 1300-740-1120 mm Berat: 233 kg Harga: 8190 EUR (EXW Jonava, Lituania)

Kondisi: baik (bekas), Tahun pembuatan: 1990, masih dalam kondisi baik, mesin press briket Motor hidrolik 5,5 kW Kontainer serbuk di bawah 120 x 120 cm dengan atas tambahan miring (bagian atas 2 m), tinggi 85 cm filter tambahan tersedia jika diinginkan (dengan biaya tambahan) Guedpfx Agoxdlhro Rsk atas tambahan kayu yang lebih kecil juga dapat dibuat

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit Guedpfxofhql Te Ag Rek RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Kondisi: baru, 20-26-537/3 FALACH mesin press briket hidrolik (baru) Tipe 100 Diameter briket: 70 mm Kapasitas press: 90 - 120 kg/jam Panjang briket (dapat diatur): sekitar 45 mm Volume hopper: 0,75 m3 Daya motor pompa: 11 kW Konsumsi daya: 8,2 kW/jam Tegangan & arus masuk: 3x400V, 32 A Pendingin oli: ya Operasi: kontinu Putar balik otomatis roda penyangga: ya Pemutusan otomatis: ya Kadar kelembaban maksimum: 15 % Berat jenis briket: 900-1100 kg/m3 Gjdpfexrn Ukox Ag Rjuk Tingkat kebisingan maksimum: 68 dB Dimensi transportasi: 2220 - 1200 – 1510 mm Bobot: 810 kg Harga: 26.230 Eur (EXW Jonava, Lithuania)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) Gsdpfx Agjd Nnwls Reuk - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baik (bekas), Tahun pembuatan: 2001, Good, used condition Few operating hours (1,675 h) Motor: 11 kW Throughput: up to max. 220 kg/h Gusdewcc D Ropfx Ag Rjk Briquette size: 150x60 mm Press dimensions: approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: approx. 500x1250x2120 mm (LxWxH) Weight: approx. 3,000 kg