Beli Mesin bubut otomatis tipe panjang bekas (232)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Data Umum Berat mesin: 2200 kg Tinggi: 1700 mm Kedalaman: 1200 mm Hedpox D Dwfsfx Ag Roni Dimensi Panjang mesin: 2200 mm Star SR 20 R III 3-sumbu ini diproduksi pada tahun 1996. Memiliki diameter pembubutan maksimum 20 mm, kecepatan spindle hingga 8.000 RPM, dan kecepatan pergerakan cepat 35 m/menit. Ideal untuk pembubutan presisi, mesin ini dilengkapi enam stasiun alat tetap dan lima stasiun alat radial bertenaga. Jika Anda mencari kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin Star SR 20 R III yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Bubut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Data Umum Berat mesin: 2.200 kg Tinggi mesin: 1.700 mm Kedalaman mesin: 1.200 mm Dimensi Panjang mesin: 2.200 mm Star SR 20 J Type C ini diproduksi pada tahun 2011. Mesin ini memiliki diameter putar maksimum 20 mm, kecepatan spindle hingga 8.000 rpm, dan daya spindle 2,2 kW. Mesin dilengkapi dengan enam posisi alat bubut tetap dan lima alat radial bermotor. Ideal untuk pekerjaan bubut presisi tipe Swiss, mesin ini memiliki area kerja yang ringkas sebesar 2,20 × 1,20 m. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hnodpfxjx D Dwls Ag Rji Tipe Aplikasi Pembubutan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 6.797 h, Steuerungseinheit Marke: FANUC Modell: 21i-TB Hnodpfjx D Sm Ujx Ag Roi Zusätzliche Ausstattung Türüberwachung / Spannvorrichtung für Hauptspindel / Hauptspindelindexierung 15° (nicht anwendbar für 480S) / Maschinenleuchte / Trennschalter (Steuerstrom: 30mA, optional erhältlich für 480A) Werkzeugsatz Diese Star SB-16 wurde 2005 gefertigt. Sie ist mit einer leistungsstarken FANUC-Steuerung, separatem Kühlmitteltank, automatischer Zentralschmierung und einem 6-fach Werkzeughalter ausgestattet. Ideal für Präzisionsdrehteile, verfügt sie über einen 4-fach Bohrhalter sowie ein umfassendes Werkstück-Austragsystem. Nutzen Sie die Gelegenheit, diese Star SB-16 Swiss-Type-Drehmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Drehen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. 2 similar machines available! Additional information: • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders Hodpjx D Dlijfx Ag Reni • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Extensive set of measuring devices

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 2.200 kg, tinggi total: 1.700 mm, jumlah sumbu: 2, Swiss-type lathe from the year 2000. This Star SR 20 R was designed for precision turning with a maximum turning diameter of 20 mm and a spindle speed of 8,000 rpm. It features 6 fixed turning tool stations and 4 radial, motorized tooling stations, providing great versatility for various applications. Take advantage of this opportunity to purchase this Swiss-type lathe Star SR 20 R. Contact us for further details. • Capacity • Maximum turning diameter: 20 mm • Maximum travel of moving tailstock (single clamping): 205 mm • Maximum workpiece diameter / bar capacity: 20 mm • Maximum workpiece length (front ejection): 80 mm • Spindle • Spindle bore diameter: 20 mm • Rapid traverse • Linear axes: 20 m/min • C-axis: 90,000°/min • Maximum feed rate (linear axes): 10 m/min • Maximum feed rate (C-axis): 10,000°/min • Tooling • Fixed turning tool: M8 × 1.25 • Turning tool on gang slide: M6 × 1 • End mill on gang slide: Ø 10 mm • Fixed turning tool stations (standard/optional): 6 • Tool shank diameter (standard/optional): 12 mm • Radial motorized tool stations: 4 Hodsyibndopfx Ag Reni • Maximum speed of motorized units: 8,000 rpm • Maximum power of motorized units: 1.2 kW • Fixed drilling/thread cutting tool stations: 4 • Maximum collet diameter (ER collet): 10 mm • Maximum drilling capacity (C45 steel): 8 mm • Maximum threading capacity (C45 steel): M8 × 1.25 / M6 × 1 • Power and utilities • Available power: 2.2 kW • Total installed power: 7 kVA • Tank capacity: 155 L • Machine dimensions and weight • Maximum footprint: 2.21 × 1.08 m • Axes • Number of axes: 2 (X and C)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 46.476 h, kecepatan spindel (maks.): 8.000 rpm, produsen pengendali: MITSUBISHI, model controller: Meldas 635, jumlah sumbu: 12, This 12-axis Citizen M32V was manufactured in 2010 and offers a maximum machining diameter of 32 mm and a turning length of 320 mm on both main and sub spindle. It comes equipped with a bar feeder, LNS chip conveyor, high-pressure pump, and various accessories. If you are looking for high-quality turning capabilities, you should consider the Citizen M32V machine we have for sale. Contact us for more information about this machine. • Axis Travels: • X1: 108 mm • Z1: 325 mm • Y1: 275 mm • X2: 120.5 mm • Z2: 202 mm • Y2: 45 mm • X3: 235 mm • Z3: 410 mm • Main Spindle: • Max. machining diameter: 32 mm • Max. turning length: 320 mm • Through-hole diameter: 36 mm Hnodpjyf Niwjfx Ag Roi • Sub Spindle: • Max. machining diameter: 32 mm • Spindle speed: 7,000 rpm • Driven Tools: • Speed: 5,000 rpm • Number on vertical tool holder: 4 • Stations on vertical tool holder: 10 Additional Equipment: • Bar feeder • LNS chip conveyor • High-pressure pump • Various holders and collet chucks (extensive accessories)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, daya motor spindle: 7.500 W, kecepatan spindel (maks.): 8.000 rpm, produsen pengendali: CINCOM, CITIZEN M32 III Swiss Type Turning ini diproduksi pada tahun 2004. Dilengkapi dengan kontrol Cincom. Mesin ini memiliki kecepatan spindle 8000 rpm. Lihat brosur resmi yang terlampir untuk detail lebih lanjut. Keunggulan Mesin Keunggulan Teknis Mesin Hnedpfjyi Eh Rox Ag Roi • Diameter maksimum batang: Ø 32 mm • Panjang pemesinan maksimum: 320 mm • Diameter bor maksimum spindle utama: Ø 12 mm • Diameter bor maksimum spindle belakang: Ø 10 mm • Kecepatan maksimum spindle sub: 7.000 rpm, daya maksimum spindle sub: 3,5 kW • Perkakas berputar: 5 perkakas tetap - 4 perkakas berpenggerak • Revolver tool: 10 posisi • Barfeeder: Lemca Boss 332 E/R tipe 37ll - tahun 2005 • Fasilitas tambahan: konveyor serpihan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 10.000 rpm, produsen pengendali: FANUC, model controller: Series 18i-TB, jumlah sumbu: 7, Mesin bubut STAR SR-20 R II ini diproduksi pada tahun 2004. Dilengkapi dengan kontrol Fanuc Seri 18i-TB dan memiliki 7 sumbu. Mesin ini memiliki kecepatan spindle 500-10000 rpm. Keunggulan mesin Keunggulan teknis mesin • Panjang pemesinan: 205 mm Hnedpfxeyi Emmo Ag Rei • Diameter maksimum batang: Ø 20 mm • Diameter maksimum saat pembubutan dari batang: Ø 20 mm • Kecepatan spindle lawan: 8000 rpm, daya motor: 2,2 kW • FMB barfeeder model Turbo 3-26/3200/a

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, daya motor spindle: 7.500 W, kecepatan spindel (maks.): 7.000 rpm, berat keseluruhan: 2.200 kg, tinggi total: 1.700 mm, diameter benda kerja (maks.): 32 mm, jumlah sumbu: 7, Diese 7-achsige Star SR-20J Typ C Swiss Type Turning wurde im Jahr 2015 hergestellt. Sie bietet einen maximalen Bearbeitungsdurchmesser von 32 mm, einen Spindelstockhub von 310 mm und Spindeldrehzahlen von bis zu 7.000 U/min. Ausgestattet mit einem Hydrajet BF20-2000 Hochdruck-Kühlmittelsystem und einer Absolent A.Mist 10S Nebelabsaugung, ist die Star SR-20J Typ C eine robuste Ergänzung für jede Bearbeitungseinrichtung. Kontaktieren Sie uns für weitere Details zu dieser Swiss Type Turning. Zusätzliche Ausrüstung • Hochdruck-Kühlmittelsystem: Hydrajet BF20-2000 • Nebelabsauganlage: Absolent A.Mist 10S • Feuerlöscher: Status X • Signalerzeugungsturm: Werna Maschinenvorteile Qualitative Maschinenvorteile • Umfassende sicherheits- und umweltmanagementsysteme (feuerlöscher, nebelabsaugung) gehören dazu. Technische Maschinenvorteile • Eilganggeschwindigkeit 24m/min, maximale spindeldrehzahl 7000 u/min, maximale drehzahl des angetriebenen werkzeugs 6000 u/min Zusätzliche Informationen Handbücher inklusive Maschine noch unter Strom Hodpsyi Emtsfx Ag Rsni Dimensions Machine Depth 2250 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, daya motor spindle: 7.500 W, kecepatan spindel (maks.): 8.000 rpm, CITIZEN M32 III Swiss Type Turning ini diproduksi pada tahun 2005. Mesin ini dilengkapi dengan kontrol Cincom. Mesin memiliki kecepatan spindle 8000 rpm. Silakan lihat brosur resmi terlampir untuk detail lebih lanjut. Keunggulan Mesin Hnjdpfxjyi Eihs Ag Rei Keunggulan Teknis Mesin • Rentang batang maksimum: Ø 32 mm • Panjang pemesinan maksimum: 320 mm • Diameter bor maksimum spindle utama: Ø 12 mm • Diameter bor spindle balik maksimum: Ø 10 mm • Kecepatan maksimum spindle balik: 7.000 rpm, daya maksimum spindle balik: 3,5 kW • Alat putar: 5 alat tetap + 4 alat bertenaga • Tool revolver: 10 posisi • Bar feeder: IEMCA Boss 332 E/R tipe 37ll – tahun 2008 • Kelengkapan: konveyor serbuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 15.000 rpm, berat keseluruhan: 1.950 kg, tinggi total: 1.050 mm, jumlah sumbu: 4, This 4-axis lathe, Citizen K16 VIP Swiss Type, was manufactured in 2005. It features a maximum machining diameter of 16 mm, with spindle speeds of up to 15,000 rpm on the main spindle and 10,000 rpm on the sub spindle. It is ideal for precision applications and supports a wide range of tooling options. This is an excellent opportunity to purchase a Citizen K16 VIP Swiss-type lathe. For further information about this Swiss-type lathe, please contact us. Additional Equipment Hnedpfxex D N Ivo Ag Rei • Turning tools: 5 • Front drills: 4 • Rear finishing tools: 4 • Tool holder, quill (diameter): 20 mm • Tool holder, turning tools (shank): 12 mm Machine Advantages Technical advantages: • High spindle speed, precision indexing, rapid traverse capability. Qualitative benefits: robust construction, compact dimensions, stability during machining. • Power input: 8 kVA Additional Information Machine still under power Dimensions Machine depth: 1850 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, a direction-dependent spindle stop, and several cross slides with tool holders for versatile machining operations. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning applications. It includes interfaces for bar feeders and tool breakage detection. Further details on this machine are available upon request. Additional Information • Programming software TB-DBCO Version 6: Stand-alone product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: Axes S1/Z1, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming step 0.1 degree) • Cross slides: • 1 cross slide with 4 tool positions (axes X1 and Y1) • 1 cross slide with 3 tool holders (axes Z3 and X3) • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent cylinders for rapid positioning • Counter spindle: Independent (S4), n = 12,000 rpm, collet F13 • Cross-slide support options: • Pre-settable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right-handed • S2 drive (electrical/mechanical) for powered attachments on the X2-Y2 linear tool carrier • Powered end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling/milling/tapping unit for collet BSX 12 Hodpfx Agjx D Dm Hs Reni • Sensor: Tool breakage detection with MIDI-DETECTOR type, mini-toggle probe MINI-DETECTOR type, electrical interface, pneumatic control devices • Interface: Adaption for an LNS bar feeder • Spindle speed: n = 16,000 rpm indicates the machine has a moderate spindle speed capacity • Additional: Comprehensive set of measuring devices Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018) 2017 Overhaul Details: Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up. Hnsdpfx Asx D D Ikjg Roi Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement • Absolute measurement system • 9 axes with C1 and C4 • Drum bar loader 'HYBRIDE 10+5' • 14 guide tubes for 1–4 mm bars • 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm • Tryton collet • 2 different hybrid drums • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar loader Technical Specification Counter spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2010. It features a sliding headstock, direction-dependent spindle stop, and cross slides equipped with tool holders. The machine is equipped with an independent counter spindle, a swiveling workpiece holder, and a lubrication system. Additional equipment includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, the TORNOS DECO 10a we are offering for sale is an excellent choice. Please contact us for further information. Additional Information: • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 stationary tool holders • Sliding headstock • Direction-dependent spindle stop S1 Hnedpfx Aox D Dmtog Rji • Independent counter spindle • Swiveling workpiece holder at the counter spindle • Lubrication device for guide bushings with filter • Thread cutting device for collet chuck ESX 12 • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive gauge package Technical Specification: Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, kecepatan spindel (maks.): 8.000 rpm, produsen pengendali: FANUC, model controller: na, jumlah sumbu: 9, en Hnsdjyalnrspfx Ag Rei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 3.500 kg, tinggi total: 1.600 mm, jarak pergerakan sumbu X: 310 mm, produsen pengendali: FANUC, model controller: Series 18i-T, panjang produk (maks.): 2.600 mm, jumlah sumbu: 3, en Hsdpfjydlpqex Ag Rsni

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 12.000 rpm, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This Swiss lathe TORNOS DECO 2000 was manufactured in 2000. It features a movable headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent counter spindle, a lubrication system, and a drum bar loader. It comes with a 'HYBRIDE 10+5' drum for bar stock up to 10 mm and an integrated hydraulic unit. For more information about this machine, please contact us. Additional Information • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slides with 4 tool stations T11-T24 with vertical and horizontal movement • Swiveling workpiece holder at the counter spindle • Direction-dependent spindle stop S1 • 3 presettable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Independent counter spindle • Thread cutting device for collet ESX 12 • Lubrication device for guide bush with filter • Drum-type bar loader • Integrated 25-liter hydraulic power unit with filter Hedpfxjx D Dmye Ag Roni • Front and rear support feet, center height 1100 mm Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 3.400 kg, tinggi total: 2.020 mm, produsen pengendali: FANUC, model controller: 32i-B CNC, jumlah sumbu: 6, Mesin bubut Swiss TSUGAMI HS32 6-sumbu ini diproduksi pada tahun 2011. Mesin ini memiliki kapasitas batang maksimum 32 mm dan dilengkapi dengan kontrol CNC Fanuc 32i-B. Kecepatan spindle utama dan sub-spindle mencapai hingga 8.000 rpm, sedangkan alat penggerak dapat berputar hingga 5.000 rpm. Manfaatkan kesempatan ini untuk membeli mesin bubut Swiss TSUGAMI HS32 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hsdpsx D R Uqsfx Ag Roni Keunggulan Mesin Keunggulan Teknis Mesin • Kapasitas batang maksimum: 32 mm (1,26 inci) • Kecepatan alat penggerak: hingga 5.000 rpm Informasi Tambahan Mesin masih terhubung listrik Dimensi Kedalaman mesin: 2020 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, produsen pengendali: FANUC, ESCO Escomatic EC12 ini diproduksi pada tahun 2010. Sebagai mesin bubut asal Swiss, mesin ini ideal untuk presisi dan efisiensi dalam produksi komponen kecil. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Perlengkapan tambahan • 3x automatic bar feeder • 1x perangkat penarik kawat gulung Keunggulan mesin Keunggulan teknis Hedpfx Agjyar E Re Rjni • Kapasitas batang (melalui spindle): hingga 12 mm • Daya nominal: 15 kVA • Arus nominal: 32 A • Tegangan operasi: 3-fase, 400V / 50Hz • Tegangan kontrol: 24V DC • Jenis arus: arus bolak-balik (AC) • Tegangan penerangan: 24V DC Informasi tambahan Tersedia 3 mesin identik yang sepenuhnya berfungsi Suku cadang tambahan juga termasuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, produsen pengendali: FANUC, model controller: 0i-TD, This 5-axis Star SB-20R Type N was manufactured in 2014 and is equipped with a Fanuc 0i-TD CNC control, a C-axis on both the main and sub-spindle, and a 6-position tool holder. It features a 5-spindle unit for cross-drilling, a sub-spindle with a 20 mm part holding capacity, and a standalone coolant tank. This machine is ideal for precision manufacturing of small parts. If you are looking for high-quality turning capabilities, consider the Star SB-20R Type N, which we are currently offering for sale. Please contact us for more information. Hedox U Ty Tspfx Ag Reni Additional Equipment • Parts ejection safety / Spring-loaded parts ejector / Air blow device for guide bushing and sub-spindle / Standalone coolant tank with level monitoring / Probe / Automatic central lubrication system with level monitoring / Bar feeder interface / RS232C interface / RJ45 / USB • The machine was used for series production of small parts with extremely high precision from relatively soft standard material. The machine has not been exposed to dynamic loads; production was carried out using oil. The machine has been regularly serviced, with bearings—always in perfect condition—being replaced almost constantly. • MBC (BROXTEC) chip conveyor / Workpiece transport belt / FMB Minimag 3200 bar feeder (⌀ 8) Benefits of the Machine Technical Advantages of the Machine • C-axis on the main and sub-spindle • Clamping device on main and sub-spindle / Collet for main and sub-spindle f25 • 6-position tool holder 12x12mm / 4-position tool holder without drill clamping • Sub-spindle with 20mm (23mm) workpiece capacity • 5-spindle cross-drilling unit with driven tools / Power unit for driven tools for back machining with 4x ER16 drill holders / Tool breakage monitoring Additional information 3 machines available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, daya motor spindle: 5.500 W, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 3.200 kg, CITIZEN M32V Swiss Type Turning ini diproduksi pada tahun 2007 di Jepang. Mesin ini memiliki kecepatan spindle 8000 rpm. Brosur resmi terlampir untuk detail lebih lanjut. Keunggulan mesin Keunggulan teknis mesin • Penjepitan material batang maksimum: Ø 32 mm • Panjang pemesinan maksimum: 320 mm • Diameter bor maksimum spindle utama: Ø 12 mm • Lubang spindle belakang maksimum: Ø 10 mm • Kecepatan maksimum spindle belakang: 7000 rpm • Daya maksimum spindle belakang: 2 kW • Alat putar: 5 alat tetap • Alat turret: 10 posisi • Pengumpan batang: IEMCA Boss 332 e/r tipe 37II • Perlengkapan: konveyor serbuk Hnjdpfeyi Einex Ag Rji

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss lathe featuring a sliding headstock, direction-dependent spindle stop, and multiple tool holders for versatile operations. It includes an independent sub-spindle, a lubrication unit, and a drum magazine. Ideal for precision turning operations with a maximum bar capacity of 10 mm. Take advantage of this opportunity to purchase the Swiss TORNOS DECO 10e lathe. Contact us for further information. 2 similar units available! Additional Features: • Sliding headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool holders T11-T24, capable of vertical and horizontal movement • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • 3 presettable turning tool holders • Motorization S2 • Thread cutting unit for collet chuck ESX 12 • 4 fixed tool holders • Drum-style bar feeder magazine Hnjdpsx D Dmmofx Ag Rsi • Integrated 25-liter hydraulic power unit with filter • Front and rear support stands, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation required up to 8 mm) • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Max turning diameter: 10 mm Optional: Comprehensive set of measuring devices available Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, Diameter batang (maks.): 8 mm, jumlah sumbu: 9, en Hnsdpjx D Dm Tjfx Ag Rei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 10.000 rpm, produsen pengendali: FANUC, model controller: Series Oi-TD, jumlah sumbu: 5, Mesin TORNOS Delta 20/5 5-sumbu ini diproduksi pada tahun 2008. Mesin ini dilengkapi dua spindle, masing-masing dapat mengerjakan batang dengan diameter hingga 20 mm dan panjang 170 mm dengan kecepatan hingga 10.000 rpm. Dikendalikan oleh CNC Fanuc Seri Oi-TD dan dilengkapi dengan magazine loader batang Robobar, mesin bubut Swiss ini sangat ideal untuk pekerjaan presisi. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. • Jumlah spindle: 2 • Spindle utama: • Diameter batang maks.: 20 mm • Panjang kerja maks.: 170 mm Hodpjx Sz A Djfx Ag Rjni • Panduan bush penggerak • Spindle penyangga: • Diameter batang maks.: 20 mm • Kecepatan spindle: 10.000 rpm • Daya spindle: 2,2 kW Perlengkapan tambahan • Magazin loader batang: Robobar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, daya motor spindle: 37.000 W, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 2.300 kg, tinggi total: 1.750 mm, produsen pengendali: CINCOM, jumlah sumbu: 6, Diese 6-achsige Citizen Cincom A20 wurde im Jahr 2018 hergestellt und verfügt über eine Hauptspindel mit einem maximalen Stangendurchmesser von 20 mm und einem Drehzahlbereich von bis zu 10.000 U/min. Sie umfasst eine Gegenspindel und angetriebene Werkzeuge mit einem Werkzeugsystem, das bis zu 21 Werkzeuge unterstützt. Die Maschine bietet Eilganggeschwindigkeiten von bis zu 32 m/min und wird mit einem LNS Express 220 Stangenlader geliefert. Erwägen Sie die Gelegenheit, diese Citizen Cincom A20 Schweizer Drehmaschine zu kaufen. Kontaktieren Sie uns für weitere Informationen. Additional equipment: • Bar feeder with magazine for bars up to 3 m • Diameter range: 2–20 mm • Automatic bar change • Further accessories Hjdpjyaqhkofx Ag Reni Machine advantages Technical advantages: • Rapid traverse rate: X1 axis: 18 m/min; Y1, Z1, X2, Z2 axes: 32 m/min Additional Information Workpiece Main spindle: Max. bar diameter: 20 mm Maximum machining length: 200 mm Main spindle drive power: 3.7 kW Spindle speed range: 10,000 rpm Spindle indexing – C-axis: 0.001° Sub spindle: Max. bar diameter: 20 mm Maximum pick-off length: 80 mm Sub spindle drive power: 1.5 kW Spindle speed range: 8,000 rpm Spindle indexing – C-axis: 0.001° Tooling: Driven tools: Number of driven tools: 4 Speed range: 6,000 rpm Drive power: 0.75 kW Tool system: Maximum number of tools: 21 For turning: 5 For fixed-position drilling: 4 front / 8 rear Dimensions Machine depth: 2,120 mm