Beli Mesin bubut otomatis tipe panjang bekas (230)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 8.300 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 6.400 rpm, Diameter batang (maks.): 32 mm, model controller: TX 8 i-p, panjang benda kerja (maks.): 245 mm, tech-specs-001 Hfodeyn Imyepfx Ag Red

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, kecepatan spindel (maks.): 7.000 rpm, Diameter batang (maks.): 42 mm, jarak pergerakan sumbu X: 70 mm, jarak lintasan sumbu Y: 70 mm, produsen pengendali: FANUC, model controller: 31i-B, jumlah sumbu: 10, This 10-axis Index C100 Swiss-type lathe was manufactured in 2018. It features impressive axis travel distances of 70 mm in the X and Y directions and 400 mm in the Z direction. The machine is equipped with three turrets with live tooling capable of reaching 8,000 rpm, and a counter spindle diameter of 42 mm. If you are looking for a high-quality turning machine, consider the Index C100, which we are offering for sale. Contact us for further details. • Operating hours: approx. 15,000 h • Spindles: Main and counter spindles with D42; counter spindle Ø42 mm, 7,000 rpm • Turrets: 3x VDI25 with Index W toothing; live tooling on all three turrets, up to 30 driven tool positions, 8,000 rpm • Coolant system: Emulsion; flushing next to main and counter spindles; through the counter spindle; 8 bar pump; 18 bar booster pump (no Eco Fluid 80 bar); mechanical coolant filter (no paper filter); coolant tower for cooling main/counter spindle and control cabinet • Software/Functions: Milling cycles Transmit / Tracyl • Monitoring: Index Motorforce tool monitoring for Fanuc Hsdpfxeyuwyvj Ag Rofd • Interfaces/Preparation: Ünimag4 interface for bar loader; preparation for oil mist system (mechanical flange D200 mm; electrical Harting connector 3x240 V) • Workholding: SK45 in main spindle (without collets); E173 in counter spindle (without collets) • Storage/Condition: Machine is stored powered on in a heated warehouse Additional equipment • Bürener chip conveyor, 840 mm height, articulated chain type • Handling device with 2-finger gripper for finished parts and remnants • Conveyor belt for finished parts with flap for remnants • Bar loader: LNS, 1,500 mm Technical Specification Counter Spindle: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2003, jam operasional: 18.538 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 431, berat keseluruhan: 7.000 kg, lebar total: 2.000 mm, panjang total: 11.000 mm, tinggi total: 1.900 mm, produsen pengendali: TRAUB, model controller: SYSTEM TX 8i, TRAUB TNK 36 CNC Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm Hodpfx Agsyh Ivlo Rjfd - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tool stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Measuring system resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Measuring system resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Measuring system resolution X/Z: 0.0005/0.001 mm - Includes the mounted toolholders as shown in the photos, as well as a chip conveyor and a coolant system from Resy, and a bar feeder from FNB, type: TURBO 5-42 Attention: The item must be collected between 01 and 02 April 2026 at a binding date yet to be agreed upon. FCA D-79115 Freiburg – loaded onto truck

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 344, berat keseluruhan: 7.000 kg, lebar total: 2.000 mm, panjang total: 11.000 mm, tinggi total: 1.900 mm, produsen pengendali: TRAUB, model controller: SYSTEM TX 8i, TRAUB TNK 36 CNC automatic lathe - Operating voltage: 460 V - Power connection: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: Hfjdsyh Hkzepfx Ag Red - Number of tool stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Measuring system resolution X/Y/Z: 0.0005/0.001/0.001 mm - Feed force X/Y/Z: 4240/4240/4240 N Front unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Z: 30/30 m/min - Feed force X/Z: 2800/2120 N - Measuring system resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Feed force X/Z: 4240/4240 N - Measuring system resolution X/Z: 0.0005/0.001 mm - Including the tool holders mounted as shown in the photos, as well as a chip conveyor and coolant system by manufacturer Resy, and a bar feeder by manufacturer FNB, type: TURBO 5-42 Attention: The item must be picked up on a binding date between 01 and 02 April 2026, to be agreed upon. FCA D-79115 Freiburg – loaded onto truck.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6060304, berat keseluruhan: 10.000 kg, lebar total: 2.000 mm, panjang total: 11.000 mm, tinggi total: 2.400 mm, produsen pengendali: TRAUB, model controller: SYSTEM TX 8i-S, TRAUB TNL 32/7 CNC Lathe - Operating voltage: 400 V - Rated current: 73 A - Max. pre-fuse: 63 A Hodpfx Aoyh Hgcjg Rjfd - Rated power: 46 kW - Frequency: 50 Hz - Main spindle, motor spindle including hollow clamping system - Max. bar capacity: 32 mm - For clamping devices up to diameter: 49 mm - C-axis max. speed: 8,000 rpm - Max. stroke: 305 mm - Upper tool turret X/Y/Z and H axis: 10 tool stations with Dual-Drive - Lower tool turret X/Y/Z and H axis: 9 tool stations with integrated drive and separate sub-spindle drive - Sub-spindle including partial hollow clamping - Max. clamping diameter for sub-spindle: 32 mm; C-axis: speed: max. 8,000 rpm - Flushing unit mounted on the lower tool turret - Part length: max. 350 mm - Diameter: max. 32 mm - Including chip conveyor and coolant system by RESY, as well as a bar loader by FNB, type: TURBO 3-36 - Including the tools and tool holders shown in the photos Note: The item must be collected, by binding appointment, between 01 and 02.04.2026; date to be coordinated. FCA D-79115 Freiburg – loaded onto truck

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Data Umum Berat mesin: 2.200 kg Tinggi: 1.752 mm Hedex D Ic Eopfx Ag Refd Dimensi Panjang mesin: 2.120 mm Penggerak Utama Kecepatan Spindel: 8.000 RPM Citizen A20 7PL ini diproduksi pada tahun 2009. Memiliki diameter putar maksimum Ø 20 mm dan panjang 55/200 mm. Kecepatan spindel hingga 8.000 rpm dengan 21 stasiun alat dan alat putar pada 6.000 rpm. Termasuk barfeeder Iemca Boss 332 E/R. Dimensi 2.120 x 1.226 x 1.752 mm dengan berat 2.200 kg. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Bubut

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 7.200 h, nomor mesin/kendaraan: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: 0°-130°, freely programmable Bar capacity: Ø 3 mm up to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear carriers: 2 Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 x 1,200 x 1,885 Weight: 3,300 kg Convertible from Swiss-type (sliding headstock) to fixed headstock turning Deep hole drilling stations NAKANISHI high-speed spindle Sub-slide with Y-axis Transverse drilling on the back side Chip conveyor Fire suppression system FMB bar feeder Minimag 20, year 2012 The machine can be inspected under power by prior arrangement. Subject to technical changes, errors, and prior sale! Hedpfx Aoyt H D Ieg Rjfd

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: IntNr230982, CNC sliding headstock lathe Citizen L520, year 1997 Control: Cincom Mitsubishi Meldas 7 axes (X1/Z1/Y1/C1/X2/Z2/C2) Bar diameter max. 20 mm Turning length max. 205 mm Main spindle: max. speed 10,000 rpm, C-axis 0.001° Hodpoyt Hvdofx Ag Rofd Counter spindle: max. speed 10,000 rpm, C-axis 0.001° Toolholder for up to 18 tools (linear toolholder, front attachment, rear machining) Parts conveyor belt Loading magazine FMB Turbo 3-26 Machine dimensions (LxWxH): 2540 x 1450 x 1850 mm Machine weight: 1,750 kg Loading magazine dimensions (LxWxH): 3900 x 900 x 1450 mm Loading magazine weight: 850 kg The machine can be inspected by appointment. Technical data and information may be subject to change and accuracy is not guaranteed. Sale subject to prior sale.

Kondisi: bekas, Tahun pembuatan: 2016, en-GB Hfsdpeytp Rqofx Ag Red

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Data Umum Lebar: 1270 mm Panjang: 2630 mm Tinggi: 1580 mm Berat mesin: 2500 kg Unit Kontrol Merek: FANUC Model: tidak ada data Penggerak Utama Rentang kecepatan spindle: 5000 rpm Daya motor spindle: 7,5 kW Jumlah sumbu: 6 Mesin Swiss Turning 6-sumbu ERGOMAT TBC-42 ini diproduksi pada tahun 2012. Mesin ini memiliki diameter material maksimum 42 mm dan kecepatan spindle hingga 5000 rpm. Dilengkapi kontrol Fanuc 18i-TB Dual Path, mesin ini menawarkan presisi dan fleksibilitas dengan 8 posisi alat dan kecepatan penggerak cepat hingga 30 m/menit. Jika Anda mencari kapabilitas bubut berkualitas tinggi, pertimbangkan mesin ERGOMAT TBC-42 yang kami tawarkan – hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pembubutan Hfjdox D Sccjpfx Ag Rsd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 7.341 h, Fungsionalitas: berfungsi sepenuhnya, CNC Long Turning Automatic Lathe Merek: STAR Tipe: SX-38 Type A Tahun Pembuatan: 2020 dilengkapi dengan: Kontrol FANUC 31i Model B5, spindle sinkron, alat berputar (driven tools), Sumbu Y2, sumbu Y3, 2x sumbu C, sumbu X2, sumbu X3, Sumbu B (dapat diprogram pada dudukan linear), Hedpfx Aex Sx T Tog Refd proses pembubutan balik independen (8 stasiun), revolver, konsveyor serpihan dan kereta serpihan, konsveyor bagian, sistem pemadam kebakaran, penghisap kabut oli, sistem bushing pemandu JBS, dapat digunakan sebagai long maupun short turning, pompa tekanan tinggi, magasin pengisi batang FMB TURBO 5-65

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 31.000 h, Fungsionalitas: berfungsi sepenuhnya, CNC long turning automatic lathe Brand: STAR Model: SV-38R Year of manufacture: 2014 including: FANUC 31i - B control, synchronizing spindle, back-working unit, live tools, turret with B, Y, X and Z axes, 2x C-axis, Y2-axis, high-pressure pump, oil mist extractor, parts conveyor, chip conveyor, fire extinguishing system, can be used as short- or long-turning lathe Hfsdpfx Aoytq Ahjg Rod bar feeder FMB Turbo 5-55

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Diameter batang (maks.): 10 mm, produsen pengendali: FANUC, model controller: 16i-TB, jumlah sumbu: 9, Swiss lathe from 2006. This TORNOS DECO 10a comes equipped with an automatic, integrated bar feeder allowing for a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It features a Robobar SSF 3m loading magazine and is fitted with a FANUC 16i-TB control unit. If you are looking for a high-quality lathe, consider the TORNOS DECO 10a we have for sale. Contact us for further details. • Overhauled in 2016: • Machine, ball screws (replaced if required), linear guides, guide bushings, main spindle and counter spindle checked • Complete cleaning • Maintenance according to Block 3 carried out • All drive belts replaced • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/Features: • Sliding headstock • Oriented spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross-slide with 4 tool stations • Tool breakage detection sensor Additional equipment: • Automatic, integrated bar feeder (oil-bath) TORNOS-BECHLER type SSF-210, equipped with Robobar SSF 3m loading magazine • Max. bar length: 3.2 m Hfodpoytcalofx Ag Rjd • Bar passage: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without collet) • "HYBRIDE 10+5" drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25-litre hydraulic unit with filter • Front and rear stabilizer foot, centre height 1,100 mm • Electrical control cabinet (circuit diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Colour: Anthracite RAL 7016 / Grey RAL 7035 Technical Specification Counter Spindle: Yes

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DATA Headstock Max. bar diameter (mm): 13.0 Material tolerance (DIN 671) (mm): Ø X h9 Collet chuck: optional passage Guide bush: optional passage Max. turning length / headstock stroke with fixed guide bush (mm): 130 with rotary guide bush (mm): 80 with programmable guide bush (mm): 80 Spindle speed: 12,000 rpm C-axis electronic resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 Slide travel X1 (mm): 35 Slide travel Y1 (mm): 38 (-10 +28) Rapid traverse X1 / Y1 (m/min): 15 Hfsdjyr N Dzepfx Ag Red Tool stations (number): 6 (12) Turning tool cross section (mm): 8x8 or 12x12 Clamping range diameter for powered drilling tools (mm): 0.5 - 7 Tool change time (s): 0.3 Tool Carrier 2 Slide travel X2 (mm): 35 Slide travel Z2 (mm): 50 Rapid traverse X2 / Z2 (m/min): 15 Tool stations (number): 6 Turning tool cross section (mm): 8x8 or 12x12 Clamping range diameter for powered drilling tools (mm): 0.5 - 7 Tool change time (s): 0.3 Tool Drive for Tool Carriers 1 & 2 Speed (rpm): 0...8000 Max. tools (number): 2x6 Clamping diameter for drilling tools (mm): 0.5 - 7 Subspindle / Front Attachment Max. bar diameter (mm): 13.0 Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 / 228 Rapid traverse Z3, Z4 / X3 (m/min): 30 Tool stations (number): 4 Spindle speed: 12,000 rpm C-axis electronic resolution (degrees): 0.001 Back Working Attachment - Synchronized / Fixed Travel Z (synchronized with main spindle, mm): 80 Tool holder diameter (mm): 20 Tool stations (number): 3 Back Working Attachment (X4 Axis) Travel X4 (mm): 39 Rapid traverse speed (m/min): 15 Tool holder diameter (mm): 28 Tool stations (number): 4 Powered Tool Drive for Back Working Attachment (with X4 Axis) Speed: 0...10,000 rpm Max. driven tools (number): 4 Clamping diameter for drilling tools: driven (mm): 0.5 - 7 not driven (mm): 0.5 - 10 Coolant System Pump pressure single-stage (bar): 3 120 bar pump for front/rear attachments Tank capacity (l): 180 Delivery rate (l/min): 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Data Umum Berat mesin: 2500–2950 kg Citizen Cincom M16-4M8 12-sumbu ini diproduksi pada tahun 2021, dilengkapi konfigurasi tangguh dengan hingga 38 alat, termasuk opsi head utama, turret, dan back tool post. Mendukung kecepatan pemakanan cepat hingga 32 m/menit, dengan laju khusus untuk sumbu X2, Y2, dan B. Motor spindle utama menghasilkan daya 2,2/3,7 kW untuk menjamin operasi yang efisien. Manfaatkan kesempatan untuk membeli mesin bubut Swiss Citizen Cincom M16-4M8 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Pembubutan Hfsdpfxox D Nfuo Ag Rsd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Diameter batang (maks.): 7 mm, jumlah sumbu: 9, Swiss lathe from the year 2000. This TORNOS Deco 10a features a movable headstock, an independent counter spindle, and a pivoting workpiece holder. It comes equipped with a magazine loader with a drum and a lubrication device for the guide bushings. If you are looking for a high-quality lathe, consider the TORNOS Deco 10a, which we have for sale. Contact us for further details. • Movable headstock • Direction-dependent spindle stop S1 • Cross slide with 4 tool holders T11-T24 featuring vertical and horizontal travel • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for the guide bush with filter • S2 motorization • Integrated 25-liter hydraulic unit with filter • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional Equipment • Magazine loader with drum (bar feeder) • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars (no bar preparation up to 8 mm) • 3 presettable turning tool holders Hodpeyr Nflofx Ag Rsfd • 4 fixed tool holders • Thread cutting device for collet ESX 12 • Front and rear support feet, center height 1100 mm Technical Specification Counter Spindle No

Kondisi: bekas, ESCO ESCOMATIC D 6 SR ist ein Drehautomat für präzise, hochgenaue und zuverlässige Fertigung. Kapazität: Werkstoffdurchlass rund 6 mm; mit Flachkurve Drehlänge 62 mm; Spindelbohrung 6 mm. Technische Daten: 3 Spindeldrehzahlen von 2400 bis 6000 t/min; 3 Drehstähle; Revolver 1a (D6-8-Mp 103/a) mit 4 Werkzeugen; Anschluss 60Hz 220/440 V; Gesamtleistung 2.5 CV; Gewicht ca. 1150 kg; Abmessung L1500 × B1000 mm. Ausstattung: Revolver und Flachkurve. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Hfodpsyr Hgmjfx Ag Rjd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 14.530 h, Unit Kontrol Merek: FANUC Model: 31i-Model B Penggerak Utama Jumlah sumbu: 3 Hedpfxsx D I Axe Ag Rsfd Mesin Star SR-20J N 3-sumbu ini diproduksi pada tahun 2019. Ini adalah mesin bubut tipe Swiss yang dirancang untuk presisi dan efisiensi. Ideal untuk pekerjaan pemesinan yang rumit, model ini menawarkan performa yang tangguh dalam ukuran yang ringkas. Jika Anda mencari kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin Star SR-20J N yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pembubutan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 51.488 h, Mesin bubut tipe swiss Citizen CINCOM A32-VII CL ini diproduksi pada tahun 2014. Dilengkapi spindle utama dengan kapasitas 32 mm, counter spindle, serta panjang pembubutan maksimum hingga 3000 mm. Dilengkapi sistem CHIDOMI berkecepatan tinggi, mesin ini mendukung pergerakan simultan di semua sumbu dan menawarkan kecepatan pemakanan hingga 9.000 mm/menit. Pertimbangkan kesempatan untuk membeli Citizen CINCOM A32-VII CL tipe swiss ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hfsdpfx Aex D Nhpeg Red Jenis Aplikasi Bubut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Allgemeine Daten Abmessungen Breite 3040 mm Abmessungen Tiefe 1370 mm Abmessungen Höhe 1820 mm Maschinengewicht 3300 kg Hauptantrieb Spindeldrehzahlbereich 200 - 8000 U/min Anzahl der Achsen 6 Werkstück Werkstück-Ø 32 mm Werkstücklänge (X) 320 mm Zusätzliche Ausstattung Vollständig ausgestattet mit Stangenlader, Bedienungsanleitungen und CE-Konformitätserklärung Diese 6-Achsen Citizen C32 VIII wurde 2005 gebaut. Ideal für präzises Langdrehen bietet diese Maschine eine robuste Funktionalität und zuverlässige Leistung. Nutzen Sie die Gelegenheit, diese Citizen C32 VIII Langdrehmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche Drehen Hfsdpfxsx D N Eus Ag Rjd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Data Umum Berat mesin: 2200 kg Tinggi: 1700 mm Kedalaman: 1200 mm Dimensi Panjang mesin: 2200 mm Star SR 20 R III 3-sumbu ini diproduksi pada tahun 1996. Memiliki diameter pembubutan maksimum 20 mm, kecepatan spindle hingga 8.000 RPM, dan kecepatan pergerakan cepat 35 m/menit. Ideal untuk pembubutan presisi, mesin ini dilengkapi enam stasiun alat tetap dan lima stasiun alat radial bertenaga. Jika Anda mencari kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin Star SR 20 R III yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Hjdjx D Dwfepfx Ag Rofd Bubut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Data Umum Berat mesin: 2.200 kg Tinggi mesin: 1.700 mm Kedalaman mesin: 1.200 mm Dimensi Panjang mesin: 2.200 mm Star SR 20 J Type C ini diproduksi pada tahun 2011. Mesin ini memiliki diameter putar maksimum 20 mm, kecepatan spindle hingga 8.000 rpm, dan daya spindle 2,2 kW. Mesin dilengkapi dengan enam posisi alat bubut tetap dan lima alat radial bermotor. Ideal untuk pekerjaan bubut presisi tipe Swiss, mesin ini memiliki area kerja yang ringkas sebesar 2,20 × 1,20 m. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hedpfxsx D Dwlj Ag Rjfd Tipe Aplikasi Pembubutan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 6.797 h, Steuerungseinheit Marke: FANUC Hfjdpex D Sm Usfx Ag Rjd Modell: 21i-TB Zusätzliche Ausstattung Türüberwachung / Spannvorrichtung für Hauptspindel / Hauptspindelindexierung 15° (nicht anwendbar für 480S) / Maschinenleuchte / Trennschalter (Steuerstrom: 30mA, optional erhältlich für 480A) Werkzeugsatz Diese Star SB-16 wurde 2005 gefertigt. Sie ist mit einer leistungsstarken FANUC-Steuerung, separatem Kühlmitteltank, automatischer Zentralschmierung und einem 6-fach Werkzeughalter ausgestattet. Ideal für Präzisionsdrehteile, verfügt sie über einen 4-fach Bohrhalter sowie ein umfassendes Werkstück-Austragsystem. Nutzen Sie die Gelegenheit, diese Star SB-16 Swiss-Type-Drehmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Drehen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. 2 similar machines available! Additional information: • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm Hsdpsx D Dlijfx Ag Rjfd • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Extensive set of measuring devices

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 2.200 kg, tinggi total: 1.700 mm, jumlah sumbu: 2, Swiss-type lathe from the year 2000. This Star SR 20 R was designed for precision turning with a maximum turning diameter of 20 mm and a spindle speed of 8,000 rpm. It features 6 fixed turning tool stations and 4 radial, motorized tooling stations, providing great versatility for various applications. Take advantage of this opportunity to purchase this Swiss-type lathe Star SR 20 R. Contact us for further details. • Capacity • Maximum turning diameter: 20 mm • Maximum travel of moving tailstock (single clamping): 205 mm • Maximum workpiece diameter / bar capacity: 20 mm • Maximum workpiece length (front ejection): 80 mm • Spindle • Spindle bore diameter: 20 mm • Rapid traverse • Linear axes: 20 m/min • C-axis: 90,000°/min • Maximum feed rate (linear axes): 10 m/min • Maximum feed rate (C-axis): 10,000°/min • Tooling • Fixed turning tool: M8 × 1.25 • Turning tool on gang slide: M6 × 1 • End mill on gang slide: Ø 10 mm • Fixed turning tool stations (standard/optional): 6 • Tool shank diameter (standard/optional): 12 mm • Radial motorized tool stations: 4 • Maximum speed of motorized units: 8,000 rpm • Maximum power of motorized units: 1.2 kW • Fixed drilling/thread cutting tool stations: 4 • Maximum collet diameter (ER collet): 10 mm • Maximum drilling capacity (C45 steel): 8 mm Hfjdpjyibndjfx Ag Red • Maximum threading capacity (C45 steel): M8 × 1.25 / M6 × 1 • Power and utilities • Available power: 2.2 kW • Total installed power: 7 kVA • Tank capacity: 155 L • Machine dimensions and weight • Maximum footprint: 2.21 × 1.08 m • Axes • Number of axes: 2 (X and C)