Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), 1 Iodpfx Ageyu T Enj Roap

Kondisi: baru, Tahun pembuatan: 2025, Measurements (L/W/H) 1400x1300x1800 mm Weight 0 kg Total power requirement 2.2 kW Saw Blade Sharpening Machine SAWMAX 600 ECO - Saw blade diameter min./max. 80-800 mm - Saw blade bore 10-200 mm - Max. saw blade thickness 1 - 7 mm - Tilt range 7-100 mm - Grinding range for rake angle -3° to +30° - Grinding range for clearance angle 6° to 40° - Grinding range for resharpening angle tooth tip/tooth face 45 degrees - Adjustment range of grinding cycle 0 - 25 mm - Grinding speed 0.5-6 mm/s - Maximum speed 20 teeth/min - Negative bevel grinding: -27 degrees - Grinding head can be rotated at an angle of 90 degrees and 180 degrees - Grinding wheel diameter 125-32 mm - Circumferential speed 26 m/s - Coolant pump capacity 25 L/min - Hydraulic working pressure 4.0 MPA - Oil tank capacity 80 L - Total power 1.85 kW / 2.2 kW Iaodpfev A Hgkex Ag Rsp - Dimensions L=1400, W=1300, H=1800 mm

Kondisi: bekas, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC control Serial No.: Year of manufacture: 1990 4 Axes (X, Y, Z, and R) Table clamping surface: 1300 x 250 mm Distance between centers: 700 mm Center height: 155 mm Grinding length (X-axis): max. 400 mm Grinding width (Y-axis): max. 260 mm Iajdod Rmcmopfx Ag Rsp Grinding spindle speed: max. 6000 rpm Grinding spindle drive: 3 kW Power supply: 380 V, 50 Hz, 25 A - CNC control dismantled Required space (L x W x H): 3800 x 2400 x 2300 mm Weight: 3000 kg Machine not functional, CNC control missing. Mechanically in good condition, ideal for control system retrofit For use as a spare parts donor or for rebuilding with new control system.

Kondisi: bekas, Guideway and Surface Grinding Machine WMW FRITZ HECKERT Aschersleben Model SZ 1000 x 1250 x 3000 / 344 Serial No. 13.2236.2, Year of manufacture 1989 Nominal grinding area: 3000 x 1250 mm Table clamping surface: 3240 x 1000 mm Maximum grinding length: 3300 mm Machining width: 1250 mm Ijdpfx Agshv A A Ds Reap Machining height: 1250 mm Grinding wheel diameter (surface grinding support): max. 600 mm Grinding wheel width (surface grinding support): max. 100 mm Grinding wheel diameter (swivel support): max. 450 mm Power supply: 400 Volt, 50 Hz - Swiveling grinding support, drive power 16.5 kW, infinitely variable speed - Grinding support for surface grinding, drive power 15 kW, infinitely variable speed - New electrical control system, based on SIEMENS S7, installed in 2001 - New electrical control cabinet beside the machine, year 2001 - Infinitely variable grinding wheel speed on both grinding supports - Swiveling grinding spindle head for guideway and profile grinding - Swiveling and height-adjustable control panel - Separate coolant system - Separate hydraulic unit - Separate oil circulation lubrication unit - Various grinding wheels and holders included Overall dimensions (L x W x H): 11,900 x 7,700 x 4,600 mm Weight: 45 t Very good condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Description to follow! Iodpfxoyrtwxo Ag Roap

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Deskripsi menyusul! Iedpeyrtwrefx Ag Rjap

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Description to follow! Ijdpfsyrtvzsx Ag Rjap

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), berat keseluruhan: 3.800 kg, kecepatan spindel (maks.): 600 rpm, jumlah sumbu: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle rated at 16 kW peak power. The machine accommodates a wide range of workpiece sizes, with a maximum diameter of Ø 20 mm and a load capacity of 1 kg. If you are looking for high-quality grinding capabilities, you should consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Please contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; positioning accuracy ±15''; index range 1–999; cumulative lead error over 100 mm: 8 µm; max. speed 600 rpm • Tool holder: ISO 50 • Spindle chuck sleeve clearance: max. 28 mm (with automatic clamping: Ø 20 mm) • Rated drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide vertical: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Positioning systems: • A-axis: direct measuring system • B-, X-, Y-, Z-axis: indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; circuit breaker: separate supply from the mains • Compressed air: 15–17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; software NUMROTOplus (dongle/hardlock required); zero points calibrated (calibration instructions supplied – no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up system • Max. workpiece: Ø 20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø 3.0–5.0 mm shank: 40 pieces • Ø 5.1–8.0 mm: 32 pieces • Ø 8.1–11.0 mm: 28 pieces • Ø 11.1–14.0 mm: 24 pieces • Ø 14.1–20.0 mm: 20 pieces • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø 32 mm × 200 mm; 2.5 kg • Features: Random loading of different workpieces; automatic quick-change collets supported • Chuck sleeves: Ø 6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and footprint to 3,000 mm × 1,875 mm Ijdpfoyiz R Uox Ag Rjap • Coolant filtration system (TRANSOR): to be provided by customer; air for back-flushing approx. 700 Nl/min for 5 min every 6–9 hours

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), jumlah sumbu: 2, This Parpas RUAP 700 was manufactured in 2000. It is a used cylindrical grinding machine, completely overhauled and in excellent condition. Features include Siemens Sinumerik 840C control, 700 mm distance between centers, and a maximum workpiece diameter of Ø 360 mm. If you are looking for a high-quality grinding machine, you should consider the Parpas RUAP 700 that we are offering for sale. Contact us for further information. Iajdoygmg Nspfx Ag Rep • Condition: Excellent • Control: Siemens Sinumerik 840C • Distance between centers: 700 mm • Center height: 185 mm • Maximum workpiece diameter: 360 mm • Maximum table travel (Z-axis): 820 mm • Table feed speed (Z-axis): 0-10 m/min • Maximum grinding headstock travel (X-axis): 500 mm • Feed speed of grinding headstock (X-axis): 0-10 m/min • Maximum wheel size (left): 508 x 203 x 76 mm • Maximum chuck size (right): 450 x 127 x 50 mm • Wheel motor power: 10 HP • Workpiece spindle speed: 0-600 rpm • Wheel spindle speed: 0-2,880 rpm • Workpiece spindle taper: ISO 50 • Tailstock internal taper: Morse 4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, lebar kerja: 1.100 mm, berat keseluruhan: 2.460 kg, Mesin Bandschleifmaschine CB Levigatrici ini diproduksi pada tahun 2006. Mesin ini memiliki lebar kerja maksimum 1100 mm, beroperasi dengan 400 V / 50 Hz, dan memiliki daya total 48 kW. Dengan bobot 2460 kg, ini merupakan pilihan yang kokoh untuk pekerjaan penggerindaan Anda. Pertimbangkan kesempatan untuk membeli Bandschleifmaschine CB Levigatrici ini. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Head penggerindaan: 3 • Listrik: 400 V / 50 Hz • Daya total: 48 kW • Arus nominal: 94 A • Catatan: Data teknis dan deskripsi adalah salinan dari konfirmasi pesanan terkait. Data hanya untuk informasi dan tidak bersifat mengikat. Ijdpfx Agjygwuqe Reap

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, This SCM DMC SYSTEM wide belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with the electronic PRO SAND control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine comes with multiple working units for various sanding applications and is powered by inverters for precise speed control. Please contact us for further information about this machine. Additional Equipment • Vacuum motor: Driven by inverter up to 7.5 kW, integrated into the machine frame / Conveyor belt: Rubber-coated conveyor belt, 50 Shore hardness / Conveyor belt motor: 4 kW, inverter-driven / Console: Integrated with PC eye-M and electronic Maestro Pro Sand control, Tele Service System, 21.5" LED LCD color display Iaedpfxjyaqg Te Ag Rjp • Programs: 1999 work programs / Control system: Interactive troubleshooting, self-diagnosis, Full-HD display with multi-touch screen, Maestro Pro Sand software • Operating temperature: +5 to 35°C / Additional features: Virtual keyboard, production report, display of electrical and pneumatic diagrams, user manual. Machine Advantages Technical Advantages • Working width: 1350 mm / Belt feed speed: 2 to 16 m/min / Control: PRO SAND electronic control / Display: PLC terminal with 10.4" LCD color display • Sanding belt dimensions: 150 x 5000 mm / Chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Unit 1: TIE 5000 working unit for extra table internal cross pad / Automatic brake, linear blower, sanding belt cleaning system / Unit 2: DO19 orbiting unit for 19 rotating disc brushes / Main motor: 1.1 kW / Rotating disc diameter: 125 mm / Units 3 & 4: BF300 working unit for brush roller / Brush roller diameter: 300 mm / Motor: 4 kW / Unit 5: SC 2620 working unit for super finishing pad / Chevron belt dimensions: 1370 x 2186 mm / Sanding belt dimensions: 1370 x 2620 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 20 h, lebar kerja: 650 mm, Belt sanding machine from 2013. The FELDER FW 650 offers a working width of 650 mm and is equipped with a powerful 7.5 kW motor. It features variable feed speed from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with exchangeable sanding pads and a rubber contact roller. If you are looking for a high-quality sanding machine, the FELDER FW 650 we are offering for sale is definitely worth considering. Contact us for further details. • Sanding belt dimensions: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7-16 m/min • 1 combination unit • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction port: 120 mm • Control system: conventional (non-CNC) Iajdoyli H Ajpfx Ag Rjp • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional features • Double-sided roller table extension • Includes sanding belts: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 650 mm, produsen pengendali: SIEMENS, model controller: 840D, berat keseluruhan: 29.000 kg, jumlah sumbu: 4, This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It is equipped with a SIEMENS 840 D CNC control, offers a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine features a swiveling angle from -30º to +180º and a cutting speed of 45 m/s. Take advantage of this opportunity to purchase this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for further information about this machine. • Center height above floor: 1,604 mm • Center height: 525 mm • Maximum grinding length: 3,000 mm • Maximum grinding diameter: 850 mm • Maximum workpiece weight (between centers): 5,000 kg • Total machine weight: 29,000 kg X-axis (Cross slide) Iasdpfx Asycuiweg Rsp • Effective travel: 650 mm • Max. programmable speed: 6,000 mm/min • Min. programmable speed: 0.01 mm/min • Min. programmable step (in diameter): 0.001 mm • Motor torque: 22 Nm Z-axis (Longitudinal slide) • Max. programmable speed: 6,000 mm/min • Min. programmable speed: 0.01 mm/min • Min. programmable step: 0.001 mm • Motor torque: 42 Nm B8 Wheel head • Swivel range: -30° to +180° • Wheel dimensions: Ø760 x 80(100) x Ø304.8 mm • Cutting speed: 45 m/s • Power: 22 kW Work head: • Spindle speed range: 10–120 rpm • Center taper: Morse 6 • Motor torque: 42 Nm Hydraulic tailstock • Maximum taper adjustment: ±0.20 mm • Maximum center travel: 100 mm • Center taper: ASA 4 Dressing unit • Location: Positioned on workpiece spindle and tailstock

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 450 mm, jarak gerak sumbu Z: 850 mm, berat keseluruhan: 12.000 kg, This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, a maximum workpiece weight of 20 kg, and a grinding spindle speed of up to 50 m/s. The machine comes equipped with shaft automation and grinding wheels and is still fully functional and powered on. Annual maintenance by Studer ensures its reliability. For further details about this machine, please contact us. • Center distance: Short (2 cross slides) 400 mm; Long (2 cross slides) 800 mm; Long (3 cross slides) 800 mm • Swing diameter: 180 mm • Max. workpiece weight: 20 kg • X-axis (cross slide) • Feed rate: 0.001–1,500 mm/min • Resolution: 0.00001 mm • Z-axis (longitudinal slide) • Max. travel path: 850 / 1,600 mm • Feed rate: 0.001–25,000 mm/min • Resolution: 0.00001 mm • Rotating turret • 8-position: Capto 6 stationary • 12-position: VDI 40 stationary • 8-position: VDI 30 driven, stationary • Max. spindle speed: 4,000 rpm • Drive power: 2.5 kW • Option: Active longitudinal measuring scale on the turret (Capto or VDI) • Grinding spindle head • Mounting angle: -25° / +25° • Grinding speed: 50 m/s • Grinding wheel size: Ø 400 x 50 (63) x 127 mm • Internal grinding attachment • Spindle positions on the rotating plate: 3 • Spindle position: 0° / +45° • Automatic positioning in 3 positions • Internal grinding spindle range: 1,200 – 120,000 rpm • Available spindle speeds: 24,000 – 120,000 rpm • Workpiece spindle head (fixed) • Speed range: 1–7,500 rpm • Drive power: 10.5 kW • Tool holder: MK4 / DIN 55026 A4 • Grinding load (surface grinding): 500 Nm • Roundness accuracy: 0.0004 mm • Workpiece tailstock (swiveling) • Swivel range: 0–10° • Resolution: 0.0001° • Speed range: 1–4,000 rpm • Drive power: 10.5 kW • Tool holder: MKS / DIN 55026 A6 • Grinding load (surface grinding): 500 Nm • Roundness accuracy: 0.0004 mm • W-axis / tailstock • Max. travel path: 450 / 1,650 mm • Feed rate: 0.001–1,500 mm/min • Fine adjustment for cylindricity corrections: ±0.01 mm • Option: Quill retraction ±0.40 mm • Quill diameter: 60 mm Isdpfxox D Iwvo Ag Rjap • Taper: MK4 • Quill stroke: 45 mm • Optional synchronous tailstock: 1–7,500 rpm; Drive power 10.5 kW; Taper MK4 / DIN 55026 A4 • Dressing • Stationary dressing tool, holder with MK1 taper • Single-point diamond / short plate • Dressing spindle with axial drive on swiveling holder: Ø 58 / 89 / 100 mm max • Dressing spindle with axial drive at the rear: Ø 100 mm max • Power requirements • Total connected load: 45 kVA • Minimum air pressure: 5.5 bar • Total weight: 7,600 / 12,000 kg • Condition and maintenance • Still powered on and fully operational • No rough grinding • Annual maintenance by Studer Additional equipment • Shaft automation (included) • Grinding wheels (included)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 3.551 h, lebar total: 1.790 mm, tinggi total: 2.150 mm, berat keseluruhan: 2.300 kg, panjang produk (maks.): 1.690 mm, This Kundig Premium-2 1350-RG wide belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt ejection system. The accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Take advantage of this opportunity to purchase the Kundig Premium-2 1350-RG wide belt sander. Contact us for more information about this machine. Iasdpfx Asx D E I Eog Rop Additional Equipment • Steel roller • Rubber roller with device for a needle roller (unused) • Belt release system Machine Advantages Technical advantages of the machine • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity not specified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Max. current consumption RP/RE: 36 A • Max. current consumption RE-L: 56 A • Required minimum fuse slow-blow RP/RE: 40 A • Required minimum fuse slow-blow RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Proper cable dimension cross-section RP/RE: 5x6 mm² • Proper cable dimension cross-section RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt air-blow diameter RE-L: 150 mm • Required total diameter of extraction connection RP/RE: 200 mm • Required total diameter of extraction connection RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for extraction RE-L: 5400 m³/h • Vacuum RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for blowing off belt or workpieces per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Max. workpiece width RP/RE: 1350 mm • Min. workpiece thickness RP/RE: 4 mm • Max. workpiece pass-through height RP/RE: 200 mm • Working height incl. machine base RP/RE: 910 mm • Feed speed range RP/RE: 3-15 m/min • Overall machine length RP/RE: 1690 mm • Overall machine length RE-L: 1850 mm • Overall machine width RP/RE: 1790 mm • Machine height incl. base and extraction nozzle RP/RE: 1950 mm • Max. machine height with base and extraction nozzle RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Additional information Machine still connected to power

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), produsen pengendali: SIEMENS, model controller: SINUMERIK 840D with SIMODRIVE 611D, berat keseluruhan: 6.200 kg, jumlah sumbu: 2, Round grinding machine from 2006. This GEIBEL & HOTZ RS 1000 CU offers a centre distance of 1000 mm and a maximum swing diameter of 355 mm. It is equipped with electromechanical X and Z axes and offers feed rates of up to 12,000 mm/min. If you are looking for a high-quality grinding machine, the GEIBEL & HOTZ RS 1000 CU we are offering for sale is worth considering. Please contact us for further details. • Current defects: • Probe is defective • Switch in coolant tank for pump control is defective • Axis configuration: 2 axes (X, Z) • Centre distance: 1000 mm • Centre height: 180 mm • Max. swing diameter: 355 mm • Max. workpiece weight: 150 kg between centres; 60 kg in chuck (including clamping device) • X axis: • Drive type: electromechanical with recirculating ball screw • Feed speed: 0.01-8,000 mm/min • Measurement system: glass scale, resolution 0.0005 mm • Z axis: • Drive type: electromechanical with recirculating ball screw • Feed rate: 0.01-12,000 mm/min • Measurement system: rotary encoder, 0.001 mm resolution • Workpiece spindle: • Motor power: 2.0 kW • Speed: 0–1000 rpm • Taper: MK5 and KK5 (DIN 55026) • Grinding spindle: Ijdpsymn Ihofx Ag Roap • Motor power: 9 kW • Speed: 1,400 rpm • Standard grinding wheel size: 500 × 80 × 203.2 mm • Bearings: precision rolling bearings • Lubrication: lifetime lubrication • Required space: approx. 3,900 × 2,450 × 1,800 mm • Power connection: 400 V, 50 Hz, 3-phase • Control voltage: 230/24 V • Installed power: approx. 23 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, jumlah sumbu: 2, Schaudt Mikrosa SASL 125 ini diproduksi pada tahun 1989. Ini adalah mesin gerinda silinder tanpa senter dengan siklus kerja yang dikendalikan NC dan bantalan poros hidrodinamis. Kedua roda gerinda dapat didandani melalui sumbu yang dikendalikan. Mesin telah direkondisi pada 2021/22 oleh UHLMAN Werkzeugmaschinen-Service dan secara berkala dirawat. Manfaatkan kesempatan untuk membeli mesin gerinda tanpa senter Schaudt Mikrosa SASL 125 ini. Hubungi kami untuk informasi lebih lanjut. Perlengkapan tambahan • Opsional: Perlengkapan tambahan tersedia Keunggulan mesin Keunggulan teknis mesin • Bantalan poros hidrodinamis Iaedpfxjx Enaps Ag Rep • Perawatan rutin selama produksi massal • Direkondisi oleh Uhlman Werkzeugmaschinen-Service pada 2021/22

Tahun pembuatan: 2021, jam operasional: 3.008 h, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 1.115 mm, berat keseluruhan: 6.500 kg, tinggi total: 1.900 mm, panjang produk (maks.): 4.400 mm, This 3-axis QGrind QGRIND U1000 cylindrical grinding machine was manufactured in 2012. It features a maximum workpiece diameter of 450 mm, a centre distance of 1000 mm, and a grinding length of 800 mm. Equipped with a Fanuc 0i-TF control and a 15" touchscreen, it offers precise control and user-friendly operation. Take advantage of this opportunity and purchase this QGRIND U1000 cylindrical grinding machine from QGrind. Contact us for further information. • Max. X-axis travel speed: 6 m/min • Max. Z-axis travel speed: 10 m/min • Minimum incremental move X/Z: 0.001 mm • Encoder resolution X/Z: 0.0001 mm • Linear scale X-axis: Heidenhain • Z-axis guideway type: V + flat, hand-scraped • X-axis guideway type: Linear • B-axis servo controlled: Yes • Maximum workpiece diameter: 450 mm • Center distance: 1000 mm • Maximum grinding length between centers: 800 mm • Max. workpiece weight between centers: 150 kg • Workpiece spindle taper: MT5 • Table swivel: 2° CW / 7.5° CCW • Peripheral wheel speed: 35-45 m/s • Left wheel dimensions: Ø455 × 50 × Ø127 mm • Right wheel dimensions: Ø355 × 38 × Ø127 mm • Tailstock taper: MT5 Iodpfex D Dvusx Ag Rsap • Tailstock quill stroke: 50 mm • Tailstock drive: Hydraulic • Grinding wheel motor power: 4.5 kW • Workhead speed: 5-400 RPM • Wheelhead swivel range: 35-190° • Max. spindle speed for internal grinding: 30,000 RPM Dimensions Machine depth: 2200 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, en Ijdpfxsx D Eyhj Ag Roap

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 4, This 4-axis Willi Göbel GRS-III-2400-SP cylindrical grinding machine was manufactured in 2018. It provides precision and efficiency for your grinding needs. If you are looking for high-quality grinding capacity, consider the Willi Göbel GRS-III-2400-SP machine that we have for sale. Please contact us for further information. Additional Equipment • Compliance with German and European regulations, including: Directive 98/37/EC (Machinery Directive) / Low Voltage Directive 73/23/EEC / Equipment and Product Safety Act (GPSG) / Accident Prevention Regulations (BGV A1) • CE marking and written confirmation of conformity included Machine Benefits Technical Machine Advantages • Tool spindle: diameter range: 170 – 220 mm / grinding wheel width: 3 – 5 mm (base body 20 mm) / bore diameter: 52 mm / maximum weight: 6 kg • Small workpiece spindle: speed range: 200 – 23,000 rpm / power: ~30 kW / maximum torque: 20 Nm / diameter range: 10 – 400 mm / maximum width: 100 mm • Large workpiece spindle: speed range: 0 – 6,000 rpm / power: ~41 kW / maximum torque: 800 Nm (with maximum workpiece weight of 250 kg) / diameter range: 390 – 700 mm / maximum width: 400 mm • Test unit: speed range: 0 – 1,000 rpm / maximum test piece diameter: 100 mm / maximum test piece width: 300 mm / maximum profile height: 35 mm • Grinding strategies: classic oscillation cycle (double-sided feed) / single-sided feed (single-sided lift) / contour grinding with all three grinding wheels (selectable by the operator) / regrinding cycle for flat surfaces with oscillating feed • Optical system: optical system with 33x magnification, coolant-resistant / three cameras installed on the grinding spindles • Integrated balancing system capable of generating imbalance reports before and after balancing / AE system (e.g. Mpm) on the grinding wheel side for monitoring the grinding process Iasdsx D Sbrjpfx Ag Rep • Emergency stop button close to the headstock / second safety door without window • Ethernet interface / USB interface / Human-Machine Interface (HMI) with touch panel or OP15 for displaying system status, configuring the machine, and manual data entry

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, This SCM DMC sd60 wide belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials with a thickness from 4 to 170 mm. Equipped with a 15 kW main motor, it offers feed speeds of 4.5/9 m/min. Further features include a rubber-coated calibrating roller, a sanding roller, a hard sanding pad, and electronic controls for precise operation. Take this opportunity to acquire an SCM DMC sd60 wide belt sander. Contact us for more information. Machine Advantages Technical Specifications • Working width: 1100 mm • Min./max. working height: 4 - 170 mm • Sanding belt dimensions: 1115 x 2150 mm • Feed speed: 4.5 / 9 m/min • Main motor: 15 kW (20 HP) Additional Information Control Unit Electronic ammeter for the main motor to monitor power consumption Electronic display of working height Electronically controlled sanding belt Electronic height adjustment LOGIC 50 K electronic programming unit LOGIC SC electronic programming unit with LCD display, two rows of dust-protected membrane keypads, and integrated LED indicators Workpiece Handling Rubber pressure rollers Infeed anti-kickback protection Iodpfx Asx Nr Sdeg Rsap Rubber feed belt Roller table with two rollers at the infeed and outfeed of the work table Pneumatic activation/deactivation of roller 1 Pneumatic activation/deactivation of roller 2 TES elastic joint sanding pad Pneumatic activation/deactivation of the sanding pad unit Units/Tooling "R" unit with roller Combination unit "CS" with roller/sanding shoe Rubber-coated calibrating roller Sanding roller with rubber coating Hard sanding pad "RA" diagonally grooved steel contact roller in the first unit

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 320 mm, jarak gerak sumbu Z: 1.150 mm, produsen pengendali: HEIDENHAIN, berat keseluruhan: 6.000 kg, Mesin gerinda KELLENBERGER KEL VARIA RS 175/1000 ini diproduksi pada tahun 2004 di Swiss. Mesin ini dilengkapi dengan kontrol HEIDENHAIN. Keunggulan mesin Keunggulan Kualitatif Iaedpfxoyi Elis Ag Rop • Kondisi baik Keunggulan Teknis • Jarak antara senter: 1000 mm • Tinggi senter: 175 mm • Dimensi batu gerinda kanan Ø 400 x 50 mm • Pergerakan kepala batu gerinda -210°/+30° • Kecepatan rotasi 8-800 rpm • Tipe spindle: CM5

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), berat keseluruhan: 5.000 kg, tinggi total: 2.050 mm, This JUNKER EJ29 CNC cylindrical grinding machine was manufactured in 2002. It is equipped with a FANUC 21i-TB CNC control unit, servo drives for the spindle and table axes, and a hydraulic/manual tailstock. The machine can handle workpieces with a diameter of up to 280 mm and a length of 800 mm, with a grinding wheel diameter of 400 mm. Take advantage of this opportunity to purchase a JUNKER EJ29 CNC cylindrical grinder. Contact us for further information. • Center distance / machinable length: approx. 800 mm • Center height: approx. 180 mm • Maximum workpiece diameter: up to approx. 280 mm Iasdpfxsyq E Sro Ag Rep • Grinding wheel diameter: approx. 400 mm (standard for European models) • Grinding wheel peripheral speed: approx. 45 m/s • Grinding wheel motor power: 4.5 kW • Design/features: Servo drives (spindle and table axes), auxiliary spindle support, hydraulic/manual tailstock Additional equipment • 4 wheel hubs • 1 hydraulic CM5 mounting spindle • 3-micron cartridge filter system Dimensions Machine depth: 3340 mm

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), jumlah sumbu: 2, el Iasdpjym Ar Uefx Ag Rjp

Tahun pembuatan: 2023, jam operasional: 4.976 h, Kondisi: siap digunakan (bekas), de-AT--Allgemeine Daten Abmessungen Breite 3250 mm Abmessungen Tiefe 2100 mm Abmessungen Höhe 2150 mm Steuerung Marke FANUC Modell 31i-B Hauptantrieb Anzahl Achsen 4 Verfahrwege X-Achse Verfahrweg 370 mm Z-Achse Verfahrweg 800 mm Werkstück Werkstückgewicht 150 kg Zusätzliche Ausstattung Ausgestattet mit: Messsonde, Kraft & Bauer Feuerlöschanlage, LTA Ölnebelseparator, DGS Papierfilter, Motorex/Ritter & Bader Kühler, Schleifscheiben, Dokumentation Diese 4-Achs-Rundschleifmaschine STUDER S33 wurde 2023 hergestellt. Sie verfügt über eine Spitzenweite von 650 mm, eine Spitzenhöhe von 175 mm und kann ein maximales Werkstückgewicht von 150 kg bearbeiten. Ausgestattet mit einer Fanuc 31i-B Steuerung bietet diese Maschine zudem eine Messsonde, eine Feuerlöschanlage, einen Ölnebelseparator und Kühler. Nutzen Sie die Gelegenheit, diese STUDER S33 Rundschleifmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Einsatzbereiche Schleifen Isdpsx D Nfnofx Ag Rsap