Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Data Umum Lebar: 2349 mm Kedalaman: 1640 mm Tinggi: 2600 mm Berat mesin: 2300 kg Hfjdpfx Aox D Nfbog Red Pergerakan Gerakan Sumbu X: 500 mm Gerakan Sumbu Y: 300 mm Gerakan Sumbu Z: 300 mm Hyundai SPT-V30TD 3-sumbu ini diproduksi pada tahun 2001. Mesin ini memiliki kecepatan spindle 8.000 rpm, ukuran meja 600 x 380 mm, dan kapasitas beban meja maksimum 200 kg. Ideal untuk aplikasi milling, dengan perjalanan sumbu X, Y, dan Z masing-masing 500 mm, 300 mm, dan 300 mm. Jangan lewatkan kesempatan untuk membeli Hyundai SPT-V30TD vertical machining centre ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Milling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 3.112 h, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, beban meja: 1.000 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 13.000 W, jumlah sumbu: 3, This 3-axis Hurco VMX30i vertical machining center was manufactured in 2016. It features a spindle speed range of 10 – 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 760 mm, a Y-axis travel of 510 mm, and a Z-axis travel of 610 mm, along with a table size of 1020 × 510 mm and a maximum table load of 1,000 kg. If you are looking for high-quality machining capability, the Hurco VMX30i machine we are offering for sale should be considered. Contact us for further details. • Control: WINMAX (MAX 5), dual screen Hfodpfx Aeyufcfjg Rjd • Table size: 1020 × 510 mm • Tool changer: 30 positions • Construction: New design Additional equipment: • Chip conveyor • Water cooling system • Spindle cooling • Full machine enclosure / chip protection grid • Machine work light • Machine base • Machine status indicator • DXF option • ULTIMONITOR Ethernet kit • Material and tool library • WINMAX PC software • External spindle blower

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 10.327 h, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 620 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 3.000 rpm, jumlah slot dalam magazin alat: 30, jumlah sumbu: 3, This 4-axis HEDELIUS RS 60 K - 2000 was manufactured in 2005. It features an extensive X-axis travel of 2000 mm, a Y-axis travel of 620 mm, and a Z-axis travel of 520 mm. The machine can accommodate a maximum workpiece weight of 1000 kg on the fixed table. If you are looking for high-quality machining capabilities, consider the vertical machining center HEDELIUS RS 60 K - 2000 we offer for sale. Contact us for further details. • Travels (fixed machine table area) X2/Y/Z: 775 / 620 / 520 mm • Distance between spindle nose and table: 100-620 mm • Max. workpiece weight: rotary/swivel table 300 kg; fixed table 1000 kg • Main spindle: Diebold MSG-E205.15-15AK4 • Axis drives (X/Y/Z): Siemens 1FT6082 // IMB 25 // 4.1 kW // 3,000 rpm // IP54 • Internal cooling: Yes, internal coolant system installed • Prepared for automatic clamping: Yes • Spindle running time: 10,327:19:09 • Condition: Used, non-operational Additional equipment • Heidenhain HR410/3+ hand control unit • 350-liter chip filter system with 20 bar internal coolant supply • Scraper-type chip conveyor • Partition for pendulum machining • 2x air blow guns • Cleaning gun (3 bar, 20 l/min) • Probe preparation: Renishaw RMP60 receiver installed; probing system itself not included • Robot interface • Oil mist extraction • Machine enclosure • Laser tool measurement system Hfodpfx Agoyudiwo Rod

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 4.684 h, Fungsionalitas: berfungsi sepenuhnya, Steuerung_NCT201_FANUC_Basis Hjdpfx Asyr Ildjg Rsfd

Kondisi: bekas, fanuc-robodrill-t21-de Hedpfoyugyrex Ag Rjfd

Kondisi: bekas, Tahun pembuatan: 2006, 1 Hfedpfoytybyex Ag Rjd

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 6.679 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H-30459, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, tinggi total: 2.800 mm, panjang total: 3.200 mm, lebar total: 2.200 mm, lebar meja: 510 mm, panjang meja: 1.020 mm, beban meja: 1.000 kg, berat keseluruhan: 4.700 kg, kecepatan spindel (maks.): 10.000 rpm, Perlengkapan: dokumentasi / manual, Pusat Pemesinan Vertikal HURCO VMX 30 - Jarak hidung spindle ke meja clamp: 152 - 762 mm - Alur-T di meja (DIN 650): 5 - Data teknis lebih lanjut lihat foto - Dengan dokumentasi teknis - Catatan penting: Ragum mesin yang terlihat di atas meja kerja tidak termasuk dalam paket penjualan! - Paket termasuk satu set dudukan alat. Perhatian: Barang harus diambil secara pasti antara 27.04 dan 30.04.2026 pada tanggal yang akan disepakati. Hfsdpfxeytny Ds Ag Rjd FCA D-39126 Magdeburg – dimuat di atas truk

Kondisi: bekas, 1 unit 5-axis universal machining centre MIKRON HBM 1350 with chip conveyor BÜRENER KFE 63/40-900 Z60, spindle and guides run in, self-dismantling. Colour: as shown, as per pictures and inspection. Condition: used Storage location: production hall Payment method: advance payment by bank transfer Hfsdeytqaaspfx Ag Rjd Shipping: collection only from Regensburg location

Kondisi: bekas, Tahun pembuatan: 2006, en-GB Hfsdsxp Rywepfx Ag Red

Kondisi: bekas, Tahun pembuatan: 2019, x-axis travel 2,000 mm y-axis travel 820 mm z-axis travel 720 mm Control Mazatrol Smooth G Spindle interface SK 40 Spindle speeds 35 - 12,000 rpm Spindle drive 22 kW Distance spindle nose to table top 140 - 860 mm Table load capacity 1,700 kg Rapid traverse x/y/z 50 m/min Table width 820 mm Table length 2,500 mm Hfsdpfetuggcjx Ag Red Table height above floor 870 mm T-slots 7 T-slot width 18 mm T-slot spacing 100 mm Tool changer 48 positions Tool change time 4.7 sec Tool diameter (with 2 free positions) 130 mm Tool diameter (fully loaded) 80 mm Max. tool weight 8 kg Max. tool length 350 mm Required air pressure 5 - 9 bar Air consumption 260 l/min Electrical specification - voltage/frequency 400 V / 50 Hz Coolant tank 450 l High-performance coolant system 25 bar Total power requirement 46.7 kW Machine weight approx. 14.8 t Space requirements approx. 4.3 x 3.6 x 3.1 m STANDARD EQUIPMENT - Transformation for the European market - USB port (1 port) - Mazak standard color - Spindle speed 12,000 rpm (SK 40 steep taper) - Work area lighting SAFETY EQUIPMENT - Operator door with interlock switch - Work area enclosure - Splash guard covers surround the work area from the sides - Fully enclosed work area - Protection against chips, coolant, and access to the work area during automatic operations - Safety features in compliance with international standards COOLANT SUPPLY - Coolant supply through the spindle (pump pressure = 5 bar) - Complete coolant system includes pumps, valves, piping, and nozzles for efficient production of quality components FACTORY AUTOMATION - Automatic on/off and warm-up function - Automatic warm-up activation via digital timer MEASURING SYSTEM - Tool length measurement and tool breakage detection CHIP DISPOSAL - Factory preparation for chip conveyor (left side) NUMERICAL CONTROL - Fixed control/operating unit - Relocation Detector - Mazatrol SmoothG CNC - 19" LCD color display (touch screen) - Mazak thread drilling / drilling cycle Tornado (Mazatrol) - Boring and threading mode for helical machining allows various diameters to be machined at high speed with a single tool. This function minimizes programming and machining times. - EIA/ISO input function - Background tool path simulation - The tool path of a program can be checked while another program number is being executed in automatic mode. - 3D coordinate transformation - Form compensation for rotary axes - Mazacc-2D software (profile compensation) - Accuracy is maintained at high feed rates. - Mazacc-3D software package for high-speed machining - High-speed, high-accuracy machining for contours defined in very fine program increments. - MAZACC-3D High-Speed Software Package (NO456) is additionally required. - High smoothing control - LAN interface - SD memory card interface - Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece profile compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Profile compensation for rotary axes - NO497 D) High precision control for finishing operations - Seamless corner control - ...

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.150 mm, jarak lintasan sumbu Y: 640 mm, jarak gerak sumbu Z: 660 mm, gerak cepat sumbu X: 33 m/menit, berat keseluruhan: 7.400 kg, kecepatan spindel (maks.): 11.000 rpm, jumlah slot dalam magazin alat: 28, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat kerja vertikal AKIRA SEIKI 4.5 XP bekas yang TELAH DIREVISI adalah pusat kerja CNC 3-sumbu berkelanjutan berukuran kecil/sedang; meja 1300×600 mm, lintasan X 1.150, Y 640, Z 660 mm, tahun pembuatan 2017, sesuai standar CE, dengan kontrol CNC FANUC 0i-MF, pergerakan cepat 33 m/menit dan kecepatan kerja 12 m/menit, berat 7.400 kg. Dilengkapi spindle fraise SK 40, 11.000 rpm daya 27Hp, didinginkan oleh chiller khusus, conveyor serpihan model sabuk, pendingin bertekanan tinggi melalui spindle, changer alat acak 28 posisi, port USB, slot memory card, port ethernet RJ 45. Mesin telah direkondisi termasuk sumbu dan unit spindle baru lengkap dengan 0 jam kerja; BERFUNGSI SEMPURNA! Hfedpfsyt Sanjx Ag Rsd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jarak pergerakan sumbu X: 1.626 mm, jarak lintasan sumbu Y: 813 mm, jarak gerak sumbu Z: 762 mm, produsen pengendali: HAAS, lebar meja: 711 mm, panjang meja: 1.626 mm, beban meja: 1.814 kg, berat keseluruhan: 10.887 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 5.400 g, jumlah sumbu: 3, This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum load capacity of 1,814 kg. The machine provides a tool changer capacity of 30+1 and rapid traverse speed of 15.2 m/min. If you are looking for high-quality machining capabilities, consider the HAAS VM-6 vertical machining center we offer for sale. Contact us for further details. • Spindle nose to table: max. 864 mm (34.0 in), min. 102 mm (4.0 in) • Spindle Hfjdpfx Agsyt Rius Rsd • Maximum torque: 122.0 Nm at 2,000 rpm (90.0 ft-lbf) • Drive system: Inline direct drive • Taper: CT40 | BT40 | HSK-A63 • Lubrication: Air/oil injection • Cooling: Liquid-cooled • Table • Length: 1626 mm (64.0 in) • Width: 711 mm (28.0 in) • T-slot width: 15.90–16.00 mm (0.626–0.630 in) • T-slot center distance: 125 mm (4.92 in) • Max. table load: 1,814 kg (4,000 lb) • Feed rates and thrust • Max. cutting feed rate: 12.7 m/min (500 ipm) • Rapid traverse (X/Y/Z): 15.2 m/min (600 ipm) • Max. X-axis thrust: 15,124 N (3,400 lbf) • Max. Y-axis thrust: 18,238 N (4,100 lbf) • Max. Z-axis thrust: 24,910 N (5,600 lbf) • Tool changer • Type: SMTC (side-mount tool changer) • Capacity: 30+1 • Max. tool diameter (full): 64 mm (2.5 in) • Max. tool diameter (adjacent empty): 127 mm (5.0 in) • Max. tool length: 406 mm (16 in) • Tool-to-tool time (avg): 2.80 s • Chip-to-chip time (avg): 3.60 s • Auxiliary • Coolant capacity: 360 L (95 gal) • Required air: 113 L/min at 6.9 bar (4 scfm at 100 psi) • Minimum air pressure: 5.5 bar (80 psi) • Electrical • Input voltage (3-phase) low: 220 VAC, full-load current: 70 A • Input voltage (3-phase) high: 440 VAC, full-load amps: 35 A Technical Specification Taper Size ISO 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 31.460 h, jarak pergerakan sumbu X: 935 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 HSCI, beban meja: 1.500 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It offers an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine features a robust table diameter of 1,040 mm and a maximum table load capacity of 1,500 kg. If you are looking for high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining center we have for sale. Contact us for further details. • Maximum feed rate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operation mode 4: Machining process control (operation with open work area door allowed) • Repairs/Maintenance: • C-axis seal replaced shortly after warranty period (upgraded version) • Spindle replaced (05/2021) • Machine calibrated last year - circular interpolation (ballbar test) within tolerance • Typical application: • Duralumin machining 80% in total Hfedpfx Agsyt Rdrj Rsd • 3-axis: 50% • 5-axis: 40% (up to 10% simultaneous 5-axis) Additional equipment • Touch probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electronic handwheel • Air gun • Chip conveyor Technical Specification Taper size HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 280 mm, beban meja: 100 kg, kecepatan spindel (maks.): 42.000 rpm, jumlah sumbu: 3, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping area of 450 × 400 mm. The integrated swivel rotary table offers a swivel range from -15° to +130°, increasing the machine's versatility. If you are looking for high-quality machining capabilities, you should consider the DMG MORI HSC 20 vertical machining center that we have available for sale. Contact us for further details. • Fixed table with T-slots • Clamping area: 450 × 400 mm • Spindle interface: HSK-E32 • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer with pick-up system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air purge through the spindle axis • Ethernet interface prepared • CELOS control with Siemens 840D sl Operate • 21.5" ERGOline touchscreen control panel • CAD/CAM connectivity • Compatible with PPS/ERP systems • 5-axis precision package • Integrated swiveling rotary table • A-axis tilt range: -15° to +130° Hsdpfx Aeyt Nxzjg Rofd • C-axis rotary table diameter: Ø250 mm • Integrated torque motor for the C-axis • Maximum rotation speed: 50 rpm • 4-color machine status indicator lamp • Remote diagnostics capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Service remote monitoring (Service Agent) • Including installation and commissioning of the machine • 3D STEP model for CAD integration • Permanently lubricated spindle Additional Equipment • Automatic pallet/parts handling system PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Lifting device for machine transport • Machine packed for truck transportation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jarak pergerakan sumbu X: 4.200 mm, jarak lintasan sumbu Y: 485 mm, jarak gerak sumbu Z: 340 mm, tinggi total: 2.000 mm, lebar total: 1.600 mm, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 6.000 rpm, daya motor spindle: 6.000 W, panjang produk (maks.): 7.500 mm, jumlah sumbu: 3, EN Hedpfjyt Ifyox Ag Rsfd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 13 m/menit, pergeseran cepat sumbu Y: 13 m/menit, pergerakan cepat sumbu Z: 13 m/menit, panjang pemakanan sumbu X: 5.000 mm, panjang umpan sumbu Y: 5.000 mm, panjang umpan sumbu Z: 5.000 mm, kecepatan spindel (maks.): 7.500 rpm, PUSAT PEMROSESAN VERTIKAL MIKRON VCE 750 PERGERAKAN 760X400X500 SPINDLE ISO 40 7500 RPM PENUKAR ALAT 20 POSISI Hfjdpoyt Il Hsfx Ag Rsd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.200 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 300 mm, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 6.000 rpm, daya motor spindle: 5.500 W, jumlah sumbu: 3, en Hodjyt Hg Njpfx Ag Rjfd

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Yang Eagle SMV 1000 Tahun pembuatan: 1999 Kontrol: - Fanuc OM Spindel utama: - Maks. 6000 rpm Hfjdpfx Aoytp Rweg Rjd Pergantian alat: - 20 slot majalah Perjalanan sumbu: - X-1020, Y-510, Z-510 mm Meja: - Area penjepit 1070 x 500 mm Ketersediaan: - Segera atau sesuai kesepakatan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Syntak MBV 10 termasuk pembagi poros ke-4 Tahun pembuatan: 2010 Kontrol: - Fanuc Oi-MD Spindel utama: - maks. 10.000 rpm Perjalanan sumbu: - X- 1040, Y- 600, Z- 620 mm Penukar alat: Hfedpoytp Nasfx Ag Rsd - 30 posisi magazin Desain meja: - Permukaan penjepit 1200 x 600 mm Sistem pendingin: - Sistem filter sabuk - Konveyor serpihan Ketersediaan: - Segera atau sesuai kesepakatan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Unit Kontrol Merek: HEIDENHAIN Model: TNC 620 Meja Kerja Beban meja: 1500 kg Penggerak Utama Jumlah sumbu: 4 Kecepatan spindle: 15.000 RPM Hfodpfex D Dzdex Ag Rjd Tipe alat: SK 40 Pergerakan Pergerakan sumbu X: 1200 mm Pergerakan sumbu Z: 500 mm Pergerakan sumbu Y: 610 mm Alat Slot dalam penyimpanan: 32 EMCO Emcomill EM 1200 dengan 4 sumbu ini diproduksi tahun 2021. Dilengkapi dengan kontrol HEIDENHAIN TNC 620, spindle 15.000 rpm, dan dudukan alat SK40. Mesin ini menawarkan langkah X-1200, Y-610, Z-500 dan mendukung berat benda kerja maksimum 1500 kg. Dengan 32 alat potong dan 3300 jam operasi, pertimbangkan kesempatan untuk membeli pusat pemesinan vertikal EMCO Emcomill EM 1200 ini. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Milling (Frais)

Kondisi: bekas, Tahun pembuatan: 2010, en Hfjdpfx Agsytcf Us Red

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 540 mm, jarak gerak sumbu Z: 540 mm, kecepatan pemakanan sumbu X: 36.000 m/menit, laju pemakanan gandar Y: 36.000 m/menit, laju pemakanan sumbu Z: 36.000 m/menit, tinggi total: 2.570 mm, panjang total: 2.995 mm, lebar total: 2.190 mm, lebar meja: 540 mm, panjang meja: 900 mm, beban meja: 700 kg, kecepatan rotasi (min.): 8.000 rpm, 3-axis machining center Hardinge Bridgeport - GX800 MACH-ID 9454 Manufacturer: Hardinge Bridgeport Model: GX800 Control: Heidenhain iTNC530 Year of manufacture: 2008 GX-Performance VMC Heidenhain iTNC530 control with HR 410 handwheel Coolant system Rigid construction and high reliability Central lubrication system X-axis travel: 800 mm Y-axis travel: 540 mm Z-axis travel: 540 mm Table length: 900 mm Table width: 540 mm Table load capacity: 700 kg X-axis feed rate: 36,000 mm/min Y-axis feed rate: 36,000 mm/min Z-axis feed rate: 36,000 mm/min Tool holder: 40 ISO / BT / MK Spindle power: 13 kW Spindle speed: 8,000 rpm Tool changer: 20 positions Number of controlled axes: 3 Chip conveyor: Yes Coolant unit: Yes Length: 2,995 mm Hfedoyt Hnaopfx Ag Rsd Width: 2,190 mm Height: 2,570 mm Weight: 4,900 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. As such, it does not represent warranties or contractual terms. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.035 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, jumlah slot dalam magazin alat: 20, produsen pengendali: Heidenhain, tinggi total: 2.665 mm, panjang total: 3.250 mm, lebar total: 2.779 mm, berat keseluruhan: 4.100 kg, panjang meja: 1.200 mm, lebar meja: 560 mm, model controller: Heidenhain TNC 620, torsi: 83 Nm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, daya nominal (semu): 17 kVA, jumlah spindel: 1, pergerakan cepat sumbu Z: 25 m/menit, gerak cepat sumbu X: 25 m/menit, pergeseran cepat sumbu Y: 25 m/menit, kecepatan spindel (maks.): 9.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 720 kg, diameter alat: 80 mm, panjang alat: 300 mm, berat alat: 6.000 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: Used DMC 1035 V eco – Powerful Vertical Machining Centre Upgrade your manufacturing processes with this robust and high-performance DMC 1035 V eco from DMG MORI! This vertical machining centre is ideal for a wide range of milling applications and delivers excellent performance when machining various materials. Key Features: - High rigidity and stability: Ensures precise machining results and long service life. - Large working area: Provides ample space for processing large workpieces. - High spindle speed: Enables fast and efficient machining operations. - Robust construction: Guarantees a long service life and reliable performance. - CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Hfjdpfxjytryze Ag Rsd - Year of manufacture: 2010 - Condition: good, used - Control: Heidenhain TNC 620 - Travel: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 9,000 rpm Ideal For: - General machining - Tool and mould making - Single part and small batch production - Mechanical engineering Why choose this DMC 1035 V eco? This machine has been regularly maintained and is in good used condition. It offers a cost-effective way to expand your production capacity and boost your productivity.

Kondisi: baik (bekas), Tahun pembuatan: 2003, translation01 Hjdpfjymqxcjx Ag Rofd

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Used Machining Centre Brand: KONDIA Model: ZM 99 MF (Direct Drive) Power: 20 kW Year: 2003 Weight: 5,700 kg CNC: GE FANUC Series 18i-MB Equipped with 4th axis CNC-controlled rotary table, brand TSUDAKOMA model RN-200B. Table dimensions: 1200 x 400 mm Travel (X, Y, Z): 600 x 400 x 510 mm Rapid traverse (X-Y axes): 36,000 mm/min Rapid traverse (Z axis): 30,000 mm/min Working feed rate: 5,000 mm/min Spindle: - Taper: ISO 40 - Speed range: 15,000 rpm - Max. spindle nose to table distance: 660 mm Automatic Tool Changer: - Number of tools: 20 - Tool selection: RANDOM - Max. tool length: 225 mm - Max. tool weight: 6 kg Precision: - Positioning accuracy: 0.01 mm - Repeatability: 0.005 mm - Resolution: 0.001 mm Equipped with chip conveyor. Hodpfx Agshymdxj Refd Includes vise. Includes ISO 40 tool holders.