Beli mesin multi-spindle bekas (172)

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Maximum diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygon turning attachment: slide unit 5.1 - Bar loader: IEMCA SIR MS32/38 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal Todpsuhar Ejfx Adced - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company chosen by the buyer.

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS32P Tsdpjwyfn Hofx Adcod

Kondisi: bekas, Tahun pembuatan: 1990, Detail Teknis: Jumlah spindel: 8 Artikel: mesin bubut otomatis multi-spindel yang dikendalikan oleh kontur Todpfx Aozubyrsdced Merek: Schütte Tipe: AFH130 dengan CNC Tahun pembuatan: 1990 Mesin bubut otomatis delapan spindel 8 spindel utama Mesin bubut otomatis AFH130 untuk pemrosesan lengkap sisi depan dan belakang benda kerja Pengendali Sinumerik 840DI Rekonstruksi lengkap mesin pada tahun 2010 dengan konfigurasi saat ini. Pemuatan dengan lengan ayun, dilengkapi dengan sistem pemuatan dan pengeluaran benda kerja Saluran pemuatan bahan baku Schindler Posisi penghentian spindel 4 dengan stasiun pembalikan benda kerja -> pemrosesan lengkap Pemeriksaan panjang benda kerja pada posisi 4 dengan penyortiran Sistem penggeser CNC pada posisi 5 Pompa pendingin dengan filter magnet Lingkup pengiriman konfigurasi perkakas dapat berbeda dari materi visual. Opsional: Ergomat TBF42 untuk memotong bahan baku dengan pemuat batang FMB-Turbo Dapat dilihat dalam kondisi produksi. Silakan hubungi kami untuk informasi lebih lanjut dan gambar melalui email di atau

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS42C Tedpfxsxpi Iao Adced

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of sub-spindles: 1 - Hirth coupling - Number of cross slides: 8 - Max. output: 50 [pieces/min] SPINDLES * Max. bar diameter: 21 [mm] * Spindle speed: 620–6000 [rpm] SUB-SPINDLE - Mechanically-driven sub-spindle ELECTRICAL SUPPLY - Supply voltage: 380 [V] WEIGHT AND DIMENSIONS - Footprint: 4700x1200 [mm] - Machine height: 2250 [mm] - Machine weight: 5850 [kg] ACCESSORIES - Control: Fanuc Power Mate - Oscillating stop - Coolant tank - Coolant container - Bar magazine: PRA 40/33F Tedpfxewdaf Us Adcsd - Bar holder with base

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 130 mm, berat keseluruhan: 4.500 kg, jumlah sumbu: 4, en Tjdpox D Rdlofx Adced

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of counter spindles: 1 - Hirth gearing - Number of cross slides: 8 - Maximum output: 50 pcs/min SPINDLES * Maximum bar diameter: 21 mm * Spindle speed: 620 - 6000 rpm COUNTER SPINDLE - Mechanically driven counter spindle ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Footprint: 4700 x 1200 mm - Machine height: 2250 mm - Machine weight: 5850 kg ACCESSORIES - CNC control: Fanuc Power Mate Tsdpfxewdag Se Adced - Oscillating stop - Coolant tank * with high-pressure pump: 60 bar - Coolant container - Bar feeder: PRA 40/33F - Bar guide and base

Kondisi: bekas, DATA TEKNIS - Jumlah sumbu: 23 - Jumlah spindel: 8 - Jumlah spindel lawan: 1 - Panjang benda kerja maks.: 100 [mm] SPINDEL - Diameter batang maks.: 22 [mm] - Kecepatan putar spindel: 8000 [RPM] - Daya penggerak spindel: 11,2 [kW] SPINDEL LAWAN - Langkah sumbu Y: 280 [mm] - Langkah sumbu Z: 450 [mm] SUMBU NUMERIK - 1 meja silang pada posisi 1: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 2: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 3: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 4: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 5: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 6: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 7: x=50 [mm], Z1=80 [mm] - 1 meja pemotong 8: x=65 [mm] PASOKAN LISTRIK - Tegangan pasokan: 400 [V] - Daya total: 80 [kVA] BERAT DAN DIMENSI - Ruang yang dibutuhkan: 5.300 x 2.200 [mm] - Tinggi mesin: 2.600 [mm] - Berat mesin: 12.000 [kg] JAM MESIN - Jam operasi: 75.000 [jam] Tedpfx Aszhph Dodcjd AKSESORI - Pengontrol: Fanuc 30i-TB - Gigi Hirth - 1 spindel lawan pada posisi 7 - Spindel lawan dengan perangkat pemesinan ulang - 2 x 4 alat pemesinan ulang - 8 spindel dengan kecepatan putar spindel independen - Sumbu C pada semua 8 spindel dan spindel lawan: 0,001 [derajat] - Konveyor serpihan: MAYFRAN - Tangki pendingin * dengan pompa tekanan tinggi: 35 + 80 [bar] - Majalah batang: ROBOBAR MSF-522/8 - Sistem penyedot kabut oli

Kondisi: bekas, DATA TEKNIS - Jumlah sumbu: 23 - Jumlah spindel: 8 - Jumlah spindel lawan: 1 - Panjang benda kerja maks.: 100 [mm] SPINDEL - Diameter batang maks.: 22 [mm] - Kecepatan spindel: 8000 [RPM] - Daya penggerak spindel: 11,2 [kW] SPINDEL LAWAN - Rentang gerakan Y: 280 [mm] - Rentang gerakan Z: 450 [mm] SUMBU NUMERIK - 1 meja silang pada posisi 1: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 2: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 3: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 4: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 5: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 6: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 7: x=50 [mm], Z1=80 [mm] - 1 meja pemotong 8: x=65 [mm] PASOKAN LISTRIK - Tegangan suplai: 400 [V] - Total daya: 80 [kVA] BERAT DAN DIMENSI Tedpfxozhphws Adcsd - Luas yang dibutuhkan: 5.300 x 2.200 [mm] - Tinggi mesin: 2.600 [mm] - Berat mesin: 12.000 [kg] JAM PENGOPERASIAN MESIN - Jam dalam keadaan menyala: 73.500 [jam] AKSESORI - Pengontrol: Fanuc 30i-TB - Gigi Hirth - 1 spindel lawan pada posisi 7 - Spindel lawan dengan perlengkapan pemesinan berlawanan - 2 x 4 alat pemesinan berlawanan - 8 spindel dengan kecepatan spindel independen - Sumbu C pada semua 8 spindel dan spindel lawan: 0,001 [derajat] - Konveyor serpihan: MAYFRAN - Tangki pendingin * dengan pompa tekanan tinggi: 35 + 80 [bar] - Majalah batang: ROBOBAR MSF-522/8 - Sistem penyedot kabut oli

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled Todpfx Aeuhatpsdcsd - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC control: SIEMENS 840D - Counter spindle - Polygon turning unit: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer.

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - Siemens 840D CNC control - Counter-spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - KNOLL coolant tank * with high-pressure pump - KNOLL chip conveyor Tedpfxjuhar So Adcsd - Cooling unit - Parts removal system - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - SIEMENS 840D CNC control - Counter-spindle - Polygon turning attachment: Slide unit 5.1 Tjdpjuhatcjfx Adcsd - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Swarf conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. To be inspected by a qualified company on the buyer’s side.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, - Pneumatic pick-up - Pick-up brake - Axial control station 5 - Recovery oscillating arm, passage 25 - 1 tool breakage detector - Bar drop cylinder - Siemens OP5 panel - IEMCA PRA 40/42P bar feeder Tjdpfxsuq A Ayj Adcod

Kondisi: bekas, en-1 Tsdpfxeuhantj Adcjd

Kondisi: bekas, technische-daten-spindelmaschine Tsdpfx Aouharlsdcjd

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 18 mm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: Z axis CNC controlled - Slide unit 2.1: Z axis CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.3 EQUIPMENT - SIEMENS 840D CNC control Tsdpfxsuhan Tj Adced - Counter spindle - IEMCA SIR MS18/33 P bar feeder - KNOLL coolant tank * with high-pressure pump - KNOLL chip conveyor - Parts catcher - Parts ejector

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, MESIN BUBUT GILDEMEISTER GS20 VARIAN 25 MM DIREVISI SECARA LISTRIK DAN MEKANIK - Chuck pemegang pneumatik telah direvisi Todpfx Asw Sxptedcsd - Unit pengolahan udara dan solenoid valve baru - Carriage radial dan aksial di posisi 1-2-4-5 - Penjepit benda kerja di posisi 6 REVISI MEKANIK: 1. Revisi drum 2. Revisi carriage 3. Revisi bagian frontal dan tuas 4. Revisi spindle 5. Revisi pembukaan/penutupan collet 6. Revisi unit knocking (ulir) REVISI LISTRIK: 1. PLC SIEMENS S71200 dan panel SIEMENS KTP700 baru 2. Encoder cam 3. Penggantian relay

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, daya motor spindle: 26.000 W, kecepatan spindel (maks.): 3.500 rpm, Diameter batang (maks.): 76 mm, lebar total: 2.210 mm, tinggi total: 2.480 mm, berat keseluruhan: 12.700 kg, produsen pengendali: FANUC, model controller: Series 31i-MODEL A, panjang produk (maks.): 4.050 mm, jumlah sumbu: 8, Mesin bubut 8-sumbu DOOSAN PUMA TT2500SY ini diproduksi pada tahun 2008. Mesin ini memiliki diameter bubut maksimum 390 mm pada revolver atas dan 300 mm pada revolver bawah, serta panjang bubut maksimum 350 mm. Mesin ini dilengkapi dengan revolver perkakas yang kokoh dengan 24 stasiun dan kecepatan cepat 20 m/menit untuk sumbu X1 dan X2. Jika Anda mencari kapasitas bubut berkualitas tinggi, Anda harus mempertimbangkan mesin bubut multi-spindel DOOSAN PUMA TT2500SY. Hubungi kami untuk informasi lebih lanjut. • Jumlah sumbu: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Jangkauan ayun di atas meja: 800 mm • Jangkauan ayun di atas kepala: 620 mm • Diameter bubut maks.: Revolver atas 390 mm; Revolver bawah 300 mm • Diameter bubut yang direkomendasikan: 255 mm • Panjang bubut maks.: 350 mm • Daya motor spindel utama/kiri (30 menit / operasi berkelanjutan): 26 / 22 kW • Taper spindel utama/kiri: ASA A2-8 • Kecepatan spindel kanan/tambahan maks.: 3500 RPM • Daya motor spindel kanan/tambahan (30 menit / operasi berkelanjutan): 26 / 22 kW • Taper spindel kanan/tambahan: ASA A2-8 • Pengindeksan sumbu C (C1 & C2): 360° dalam langkah 0,001° • Langkah revolver atas (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Langkah revolver bawah (X2/Z2): 190 / 900 mm • Langkah sumbu B dari spindel tambahan: 810 mm • Kecepatan cepat (X1/X2): 20 m/menit • Kecepatan cepat (Z1/Z2/B): 24 m/menit • Kecepatan cepat (Y): 7,5 m/menit • Jumlah posisi revolver: total 24 (12 di atas + 12 di bawah) • Jenis/antarmuka perkakas: BMT65P • Waktu pengindeksan: 0,2 s • Kecepatan spindel perkakas: 4000 RPM • Daya motor perkakas putar (15 menit / operasi berkelanjutan): 5,5 / 1,5 kW • Pasokan daya mesin: 95,77 kVA Peralatan Tambahan • Konveyor serpihan • Berbagai dudukan perkakas statis • Dudukan perkakas putar yang digerakkan • Cekam pada kedua spindel Tjdjznwf Djpfx Adcod Spesifikasi Teknis Spindel Tambahan Ya Perkakas yang Digerakkan Ya

Kondisi: perlu perbaikan (bekas), 3x SCHÜTTE SF40 dijual dalam paket dengan harga terjangkau - mesin perlu direkondisi Tsdpfx Ajylhp Nodced

Kondisi: bekas, TECHNICAL DATA Tjdsyh Rnqjpfx Adcjd - Number of spindles: 8 - Number of counter spindles: 1 - Maximum bar feed: 178 mm - Number of cross slides: 8 SPINDLES - Maximum bar diameter: 32 mm - Spindle speed: 199-2737 rpm - Electromagnetic clutch COUNTER SPINDLE - Counter spindle position: 7 ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Floor space required: 6632 x 1357 mm - Machine weight: 7950 kg ACCESSORIES - CNC control: Fanuc Series 0i-TD - Parts removal unit - Coolant tank - Bar magazine: IEMCA PRA 40/42F - Bar holder with base

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of counter spindles: 1 - Hirth serration - Number of cross slides: 8 - Max. output: 50 [pcs/min] SPINDLES * Max. bar diameter: 21 [mm] * Spindle speed: 620–6000 [rpm] COUNTER SPINDLE - Mechanically driven counter spindle ELECTRICAL SPECIFICATIONS - Supply voltage: 380 [V] WEIGHT AND DIMENSIONS - Footprint: 4700 x 1200 [mm] - Machine height: 2250 [mm] - Machine weight: 5850 [kg] EQUIPMENT - Control: Fanuc Power Mate - Oscillating stop - Coolant tank - Bar magazine: PRA 40/33F - Bar support and base Tedjwdahcjpfx Adcod

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of counter spindles: 1 - Hirth coupling - Number of cross slides: 8 - Max. production rate: 50 [pcs/min] SPINDLES * Max. bar diameter: 21 [mm] * Spindle speed: 620–6000 [rpm] COUNTER SPINDLE - Counter spindle of mechanical origin ELECTRICAL SUPPLY - Supply voltage: 380 [V] WEIGHT AND DIMENSIONS - Required floor space: 4700x1200 [mm] - Machine height: 2250 [mm] - Machine weight: 5850 [kg] ACCESSORIES - Control: Fanuc Power Mate - Oscillating stop - Coolant tank - Coolant reservoir - Bar magazine: PRA 40/33F - Bar support and base Tsdpfx Aowdaglsdcjd

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of counter spindles: 1 - Hirth coupling - Number of cross slides: 8 - Max. production rate: 50 pcs/min SPINDLES * Max. bar diameter: 21 mm * Spindle speed: 620–6000 rpm COUNTER SPINDLE - Counter spindle of mechanical origin ELECTRICAL SUPPLY Tedpswdahisfx Adcjd - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Footprint: 4700 x 1200 mm - Machine height: 2250 mm - Machine weight: 5,850 kg EQUIPMENT - Control system: Fanuc Power Mate - Oscillating stop - Coolant tank - Bar magazine: PRA 40/33F - Bar support and base

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, A Mori-Say 6/32M multi-spindle automatic lathe is available. Number of spindles: 6, maximum spindle speed: 3750 rpm, maximum bar diameter: 40 mm. Dimensions X/Y/Z: approx. 6200 mm / 1600 mm / 2050 mm, weight: approx. 9500 kg. Tsdpfstqfq Rjx Adced

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 9 - Bar diameter capacity: 26 [mm] MAIN SPINDLES 1 TO 6 - Nominal torque: 18.5 [Nm] - Max. spindle speed: 7000 [rpm] - X-axis travel: 70 [mm] - Z-axis stroke: 125 [mm] MAIN SPINDLES 8 AND 9 - Nominal torque: 15 [Nm] - Maximum spindle speed: 10000 [rpm] - X-axis stroke: 110 [mm] - Z-axis stroke: 125 [mm] SUBSPINDLE 7 - Nominal torque: 15 [Nm] - Max. spindle speed: 10000 [rpm] - Z-axis travel: 300 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Installed power: 109 [A] DIMENSIONS - Footprint: 9,100 x 1,805 [mm] - Machine height: 2,800 [mm] - Machine weight: 18,500 [kg] OPERATING HOURS - Operating hours: 82,000 [h] EQUIPMENT - CNC Siemens Sinumerik 840D Tedpfeuhaq Iox Adcjd - Chip conveyor - Bar feeder: SIR 36/33 F - Coolant tank: KNOLL VRF 450/2600   * with high-pressure pump   * with paper filtration   * Capacity: 2,600 [l]