Beli mesin multi-spindle bekas (201)

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled Itjdpfx Aouhar Sslnel - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - Siemens 840D CNC control - Counter-spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - KNOLL coolant tank * with high-pressure pump - KNOLL chip conveyor - Cooling unit - Parts removal system - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - SIEMENS 840D CNC control - Counter-spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Swarf conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER Itedpfsuhatcjx Alnsl * Note: Functionality not guaranteed. To be inspected by a qualified company on the buyer’s side.

Kondisi: bekas, MESIN PENUTUP BILAH/KALENDER MESIN PNEUMATIK UNTUK MENUTUP PROFIL S/C PATEN Ijdpfx Ajxl Ryijlnotl

Kondisi: bekas, TECHNICAL DATA - 8 spindles, bar capacity: 21 mm (round), 18 mm (hexagonal), 14 mm (square) - Spindle speed: 620–6,000 rpm - Production cycle: 1 to 50 pieces/min - Standard voltage: 380 V, 50 Hz - Bar loader for 3 m bar length - Roller casing EQUIPMENT - Standard slide positions 1, 2, 3, 4, 5, 6, 7, and 8 - 1 piece loading cam 60 mm - 1 auxiliary camshaft Iodpfx Ajuhaqzelnjtl - 1 counter spindle, capacity 20 mm, with lever - Cylinder lock via Hirth coupling - 8 cross slides, stroke 30 mm (optional) - Central guideway, stroke 60 mm - Cutting oil tank with magnetic drum conveyor - Coolant pump, capacity 150 L/min - Bar loading magazine Iemca PRA52/33F No. 020651PA03, year of manufacture 2006

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 (independently controlled) - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 numerically controlled axes - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: fixed X axis, Z axis CNC-controlled - Slide unit 2.1: fixed X axis, Z axis CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: fixed X axis, Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: fixed X axis, Z axis CNC-controlled - Slide unit 5.1: fixed X axis, Z axis CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled - Slide unit 6.2: X and Z axes CNC-controlled Ijdpfsuhangex Alnstl - Counter spindle at position 6.1 EQUIPMENT - Control unit: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar loader: IEMCA SIR MS32/33/P - Central lubrication system with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: RIEDEL - Part evacuation with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of drum/camplates: 8 - Number of longitudinal stations: 8 - Max. bar capacity: round Ø 22 mm - Max. bar capacity: hexagonal 19 mm - Max. bar capacity: square 15 mm - Max. feed length: 60 mm - Number of spindle speeds: 20 - Spindle speed range: 620 to 6035 rpm - Number of camshaft speeds: 24 - Spindle stop - Max. production rate: 1–50 pcs/min - Cross slide stroke: 30 mm - Max. stroke of independent advances: 50 mm - Main motor power: 10 HP - Weight: 4,700 kg EQUIPMENT - Counter-spindle with brake - Unit for back/secondary operation - Foot switch + drum Iedpfx Aouhapdslnjtl - Bar loader IEMCA PRA 40/33F - Chip conveyor

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of cam plates: 8 - Number of longitudinal stations: 8 - Max. bar capacity: round Ø 22 mm - Max. bar capacity: hexagonal 19 mm - Max. bar capacity: square 15 mm - Max. feed length: 60 mm - Number of spindle speeds: 20 Itodsuhap Repfx Alnol - Spindle speed: 620 to 6,035 rpm - Number of camshaft speeds: 24 - Max. production output: 1-50 pcs/min - Cross slide stroke: 30 mm - Max. stroke of independent feeds: 50 mm - Main motor power: 10 HP - Weight: 4,700 kg ACCESSORIES - Counter spindle with brake - Device for counter operations - Foot-operated drum - Bar feeder IEMCA PRA 40/33F - Chip conveyor

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Maximum diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X-axis fixed, Z-axis NC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - Siemens 840D CNC control - Counter spindle - Bar loader: IEMCA SIR MS32/33 P - Coolant tank: KNOLL Isdpfx Ajuhaumolnotl * with high-pressure pump - Chip conveyor: KNOLL - Parts removal device - Parts ejector - Fire protection system: KRAFT UND BAUER * NB: Functionality not guaranteed. Please have this checked by a qualified company commissioned by the buyer.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, A Mori-Say 6/32M multi-spindle automatic lathe is available. Number of spindles: 6, maximum spindle speed: 3750 rpm, maximum bar diameter: 40 mm. Dimensions X/Y/Z: approx. 6200 mm / 1600 mm / 2050 mm, weight: approx. 9500 kg. Isdpfetqfq Rjx Alnotl

Kondisi: bekas, Tahun pembuatan: 1991, en-01 Itsdjl Rmqpepfx Alnjl

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS32C Isdpfx Aeuhaqbjlnetl

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of spindles: 6 - Max. bar diameter: 20 mm; 25 mm optional - Number of cross slides: 4 - Max. feed length: 100 mm - Spindle speed: 420 - 5000 rpm - Indexing time: 0.7 s - Machining time: 1.4 - 60 s - Power: 11 kW - Dimensions: 5800 x 1500 mm Ijdpfx Alouharrjnjtl - Weight: 6000 kg EQUIPMENT - 4 cross slides, positions 1, 2, 4, 5 - 1 chip conveyor - 5 drills - 1 bar loader IEMCA PRA41/31/P

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, daya motor spindle: 26.000 W, kecepatan spindel (maks.): 3.500 rpm, Diameter batang (maks.): 76 mm, lebar total: 2.210 mm, tinggi total: 2.480 mm, berat keseluruhan: 12.700 kg, produsen pengendali: FANUC, model controller: Series 31i-MODEL A, panjang produk (maks.): 4.050 mm, jumlah sumbu: 8, Mesin bubut 8-sumbu DOOSAN PUMA TT2500SY ini diproduksi pada tahun 2008. Mesin ini memiliki diameter bubut maksimum 390 mm pada revolver atas dan 300 mm pada revolver bawah, serta panjang bubut maksimum 350 mm. Mesin ini dilengkapi dengan revolver perkakas yang kokoh dengan 24 stasiun dan kecepatan cepat 20 m/menit untuk sumbu X1 dan X2. Jika Anda mencari kapasitas bubut berkualitas tinggi, Anda harus mempertimbangkan mesin bubut multi-spindel DOOSAN PUMA TT2500SY. Hubungi kami untuk informasi lebih lanjut. • Jumlah sumbu: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Jangkauan ayun di atas meja: 800 mm • Jangkauan ayun di atas kepala: 620 mm • Diameter bubut maks.: Revolver atas 390 mm; Revolver bawah 300 mm • Diameter bubut yang direkomendasikan: 255 mm • Panjang bubut maks.: 350 mm • Daya motor spindel utama/kiri (30 menit / operasi berkelanjutan): 26 / 22 kW • Taper spindel utama/kiri: ASA A2-8 • Kecepatan spindel kanan/tambahan maks.: 3500 RPM • Daya motor spindel kanan/tambahan (30 menit / operasi berkelanjutan): 26 / 22 kW • Taper spindel kanan/tambahan: ASA A2-8 • Pengindeksan sumbu C (C1 & C2): 360° dalam langkah 0,001° • Langkah revolver atas (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Langkah revolver bawah (X2/Z2): 190 / 900 mm • Langkah sumbu B dari spindel tambahan: 810 mm • Kecepatan cepat (X1/X2): 20 m/menit • Kecepatan cepat (Z1/Z2/B): 24 m/menit • Kecepatan cepat (Y): 7,5 m/menit • Jumlah posisi revolver: total 24 (12 di atas + 12 di bawah) • Jenis/antarmuka perkakas: BMT65P • Waktu pengindeksan: 0,2 s • Kecepatan spindel perkakas: 4000 RPM • Daya motor perkakas putar (15 menit / operasi berkelanjutan): 5,5 / 1,5 kW Iodjznwf Dspfx Alnjtl • Pasokan daya mesin: 95,77 kVA Peralatan Tambahan • Konveyor serpihan • Berbagai dudukan perkakas statis • Dudukan perkakas putar yang digerakkan • Cekam pada kedua spindel Spesifikasi Teknis Spindel Tambahan Ya Perkakas yang Digerakkan Ya

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, - Pneumatic pick-up - Pick-up brake - Axial control station 5 Itodjuq A Ayopfx Alnel - Recovery oscillating arm, passage 25 - 1 tool breakage detector - Bar drop cylinder - Siemens OP5 panel - IEMCA PRA 40/42P bar feeder

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: Number of spindles: 6 Item: Cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Model: SFH130Dnt Year of manufacture: 1995 Six-spindle automatic lathe 6 main spindles with collet chuck automation Itjdpew Hbz Aefx Alnol Control: Siemens S7-200 PLC Dnt drive Loading & unloading in position 6 Additional coolant pump with magnetic candle filter Please contact us for further information and pictures via email (at) or *

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 20.317 h, daya motor spindle: 7.500 W, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, lebar total: 1.630 mm, tinggi total: 1.920 mm, berat keseluruhan: 4.350 kg, produsen pengendali: FANUC, model controller: Series 160i-8, panjang produk (maks.): 4.900 mm, jumlah sumbu: 8, en Ijdpfjy E Nq Aox Alnjtl

Kondisi: bekas, 1 Iodpjyt Sl Refx Alnjtl

Kondisi: bekas, TECHNICAL DATA - 8 spindles, bar capacity: 21 mm (round), 18 mm (hexagon), 14 mm (square) - Spindle speed: 620–6000 rpm - Production cycle: 1 to 50 pcs/min - Standard voltage: 380 V, 50 Hz - Roller for bar length: 3 m - Roller housing ACCESSORIES - Standard slides positions 1, 2, 3, 4, 5, 6, 7, and 8 Itedpfjuhaqnjx Alnsl - Cylinder locking with Hirth serration - Bar loader magazine Iemca PRA40/33F

Kondisi: bekas, TECHNICAL DATA - Bar diameter: 5-20 [mm] - Max part length (without counter-operation): 100 [mm] - Max part length (with counter-operation): 80 [mm] - Spindle speed: 5000 [rpm] - Max spindle power: 15 [kW] - Max boring/internal thread cutting power: 3.7 [kW] - Number of CNC axes: 23 - Number of cross slides: 8 Iedpfxsuhaq Uj Alnjtl - Counter-operation slide: 1 - Longitudinal slides: 7 - Sub-spindle units: 1 - Sub-spindle motor power: 1.1 [kW] - Dimensions: 5880 x 1400 x 1950 [mm] - Weight: 7200 [kg] EQUIPMENT - TORNOS PNC DECO control - HIRTH coupling drum lock - High-pressure pump - Chip conveyor - Turning tool holder - IEMCA PRA 40/33F bar feeder - Operating hours: 31,600

Kondisi: bekas, GILDEMEISTER GM35 AC MULTI-SPINDLE LATHE WITH PIETRO CUCCHI BAR LOADER Iedpfx Aswrpb Iolnetl We can offer the lathe and loader fully reconditioned as new, complete with CE certification.

Kondisi: bekas, TECHNICAL DATA - Maximum diameter: 26 mm Isdpfx Aljuhanasnjtl - Maximum feed length: 125 mm - Spindle speed: 366 – 5,020 rpm - Number of spindles: 6 - Central block stroke with taper: 85 mm Hydraulic option: 200 mm - Cross-slide stroke with taper: 36 mm Hydraulic option: 56 mm - Dimensions: 5,728 x 1,080 x 1,816 mm - Weight: 5,200 kg EQUIPMENT - Counter spindle - Base + drum

Kondisi: bekas, TECHNICAL DATA - Min/Max Bar Diameter: 8-25.4 [mm] - Max. Part Length: 120 [mm] - Spindle Speed: 5000 [rpm] Iodpfjuharxjx Alnotl - Spindle Power: 18 [kW] - Number of CNC Axes: 17 - Drum Lock with Hirth Coupling - Dimensions: 3500 x 1600 x 1950 [mm] - Weight: 8500 [kg] - Operating Hours: 66,850 [hrs] EQUIPMENT - CNC: TORNOS FANUC PNC DECO - Coolant Tank: KNOLL * with High-Pressure Pump - Bar Loader: TORNOS ROBOBAR MSF-522 - Swarf Conveyor - Cooling Unit: HYFRA

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of counter spindles: 2 - Counter spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel distances: X x Z = 62 x 85 [mm] Itedpfx Ajw Ah R Nslnol - Number of slides in counter-operation: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] - Connected load: 75 [kVA] - Production hours: 20,000 [h] ACCESSORIES - CN Siemens 840D SL - 2x NCU - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA counter spindles - 2 parts collectors with conveyor belt - Chip catcher for bar waste - Index bar guide - Bar loader predisposition - Fire protection system

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Machine No.: 7.0176 Year of Manufacture: 1987 Weight: 11t General / Technical Data: Portal-type 6-spindle automatic lathe Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main processing time: Infinitely variable 1.95 – 78 sec. Secondary processing time: 0.79 – 2.13 sec. Drive power: DC motor, spindles 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Remarks: The machine cannot be retrofitted for bar work. Features: – 1 creep drive for setup operation – 1 automatic central lubrication system – 1 coolant unit with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-start with electrical interlock of the side door – Hinged belt chip conveyor Itjdpfx Alsin Ub Tjnol – Machine configuration with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical Configuration: The electrical equipment comprises a direct current (DC) main drive with 20 kW power for the spindle drive and an AC servo motor for the feed drive with 8 kW power (IP 54 protection class), along with the respective switching and control units as well as the required installation. Total machine connection: 32 kW/h.

Kondisi: bekas, Tahun pembuatan: 2008, Technical details: Itsdpsluhcgjfx Alnol Number of spindles: 6 Spindle bore: 18 mm Turning length: 63/50 mm Approx. machine weight: 4.5 t Spindle drive motor: 11 kW