Beli Mesin bubut poros penggerak/pengarah dengan diameter pembubutan di atas ranjang 300–399 mm bekas (210)

Kondisi: bekas, Tahun pembuatan: 1959, Swing over bed: 380 mm Swing over cross slide: 215 mm Turning length: 1000 mm Machine weight approx. 1800 kg Space requirement approx. 2.7 x 1.2 x 1 m The L&Z lathe is in good condition. Scope of delivery includes extensive accessories and cabinets: Guedpfx Agevwgmae Rjk - 3-jaw chuck - 4-jaw face plate - Steady rest

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Commodor ini berasal dari sekolah teknik dan oleh karena itu memiliki jam operasi yang rendah. Dipakai secara ringan dan tidak dibebani berat – mesin yang rapi dan andal dengan masa pakai yang masih panjang. Gsdpfxjw U Sx Ho Ag Reuk Panjang pembubutan: 1.000 mm. Diameter bubut di atas alas: 380 mm. Diameter bubut di atas eretan lintang: 190 mm. Jumlah putaran spindle: 25 – 2.000 rpm. Jumlah tingkat kecepatan: 18 langkah. Lubang spindle: Ø 56,0 mm. Kepala spindle: MK DIN 228 / MK 4. Flens spindle: DIN 55027 / ukuran 6. Langkah eretan lintang: 150 mm. Lebar alas: 310 mm. Feed – longitudinal: 0,022 – 0,8 mm/put. Feed – melintang: 0,011 – 0,4 mm/put. Tegangan: 380 V. Daya total yang dibutuhkan: 7,5 kW.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Schaublin 150 High-Precision Lathe with 2-axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025 - 0.35 mm/rev >> Metric threads: 0.25 – 14 mm >> Tailstock: MT3 Gusdpfx Aowynluog Rsk >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-jaw chuck 160 mm, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets >> Change gears >> Stops >> Coolant system >> 1 box of spare jaws >> Centres >> Operating manual About the machine: For sale is a Schaublin 150 high-precision lathe. The machine is operational, equipped with rapid traverse, and is in good used condition. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Kondisi: baik (bekas), Tovaglieri parallel lathe Used, previously owned by an educational institution. Excellent condition. Gjdpfokt U E Ijx Ag Rsuk Center height: 180 mm Distance between centers: 700 mm Spindle bore: 45 mm Supplied accessories included. 4 units available, subject to prior sale.

Kondisi: bekas, diameter putar di atas sled silang: 230 mm, diameter pembubutan di atas alas geser: 380 mm, tinggi pusat: 190 mm, lebar di tengah: 1.270 mm, Lead and Feed Screw Lathe Make: Strojimport, Model TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Model: TK 380 x 1500 Year of manufacture: Unknown Control type: Conventional Centre distance: 1270 mm Swing diameter over bed: 380 mm Swing diameter over cross slide: 230 mm Centre height: 190 mm Spindle speed: 45 – 2000 rpm Bed width / length / height: 300 / 2120 / 305 mm Spindle bore: 52 mm Dimensions (L x W x H): 2.70 x 1.00 x 1.60 m Machine weight: 1200 kg Gsdpfewgch Dox Ag Rouk Equipment - 3-axis digital readout - 3-jaw chuck with internal and external jaws - 2 live centres - 1 fixed centre - 4 quick-change tool holders - 1 steady rest - 1 drill chuck - Machine feet All information subject to change and without guarantee. A demonstration under power can be arranged at any time in our showroom.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Universal lead and feed screw lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted in RAL 7035 light grey Machine no.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip guard/rear splash guard Gusdpfog R S Rcex Ag Rsk - Operating manual - Used, as seen -

Kondisi: baru, Tahun pembuatan: 2025, The TYTAN CENTER 750 Vario turning-milling machine is a combination of two machines, offering user convenience and space savings in the workshop. It features stepless spindle speed adjustment for both lathe and milling functions. Turning: 250x750mm, 0.75 kW/230V + Milling: 0.6 kW/230V. The machine performs turning operations such as machining external and internal cylindrical surfaces, thread cutting, and parting off workpieces. Milling functions include keyway milling, drilling and reaming. It is suitable for small industrial businesses, workshops, garages, and similar environments. Main machine advantages: - Dual function integration – turning and milling in a single, compact unit. - Separate drive motors for the lathe and milling spindle, both with stepless speed control – independent operation for each function. - LCD displays for monitoring and precise spindle speed adjustment. - Two spindle speed ranges – adaptable to a variety of materials and machining processes. - Complex part machining – eliminates the need to reposition workpieces on different machines. - Rigid dovetail guideways – high stability during milling operations. Guodpfx Aew H Rdmog Rek Technical specifications: LATHE 3-jaw chuck: 125 mm Swing over bed: 250 mm Swing over carriage: 150 mm Distance between centers: 750 mm Bed width: 135 mm Spindle bore: 29 mm Spindle taper: MT4 Spindle speed adjustment: Stepless (2 ranges) Spindle speeds: 50–1125 / 100–2250 rpm Metric threads: (18) 0.2–3.5 mm Imperial threads: (21) 8–56 TPI Longitudinal feed: (6) 0.07–0.4 mm/rev Compound rest size: 65 x 65 x 20 mm Maximum tool size: 12 x 12 mm Top slide travel: 70 mm Cross slide travel: 130 mm Longitudinal travel: 630 mm Tailstock quill diameter: 30 mm Tailstock quill travel: 70 mm Tailstock taper: MT2 Motor power (S1/S6): 0.75 / 0.9 kW / 230 V MILLING MACHINE Max. drilling diameter: 16 mm Spindle quill taper: MT2 Quill travel: 50 mm Head tilt: –90° to +90° Spindle-to-column distance: 170 mm Spindle-to-table distance: 43–250 mm Spindle speed range: 50–2250 rpm T-slots (number and size): 2 x 8 mm Motor power: 0.6 kW / 230 V GENERAL PARAMETERS Machine dimensions (LxWxH): 1350 x 580 x 1630 mm Weight: 230 kg Standard equipment: - 125 mm 3-jaw chuck + reverse jaws - Machine base - Fixed centers MT2 and MT4 - MT2/B16 drill arbor and drill chuck - Change gears - Set of spanners, oil gun, and service tools - CE-compliant guards

Kondisi: baik (bekas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Infinitely variable speed from 15 to 3250 rpm 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool holder size B with 4 inserts Machine light, chuck guard with electrical interlock, machine feet 1 x revolving centre, 1 x revolving centre with pressure gauge Gujdpfxsuqkf Ns Ag Rjk 1 x drill chuck with taper shank The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing is possible by appointment.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew Godpfxevrckqo Ag Rjuk About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: baru, Tahun pembuatan: 2025, Swing diameter over bed 390 mm Swing diameter over cross slide 240 mm Gusdpfjwp Trljx Ag Rjk Turning length 1250 mm Centre height 190 mm Spindle bore 54 mm Drive power 5.5 kW - New machine - - Handwheel on the left side of the carriage - with 3-axis digital readout FAGOR INNOVA 30iT * For more information on the exact standard configuration and available options, please visit our website or contact us directly by phone *

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Universal lead and feed screw lathe Brand: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted in RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system Gedpfx Ajhy Tdyeg Reuk - Electrically interlocked chuck guard - Quick-change tool post size A - Simple bed stop - Chip guard (rear wall) - Operating manual With warranty Sold as seen/used The machine is technically compliant with the state of the art at the time of manufacture.

Kondisi: baru, Praktikant VC plus The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. Its strengths include: forward-thinking technology maximum precision long service life operator-friendly ergonomics minimal space requirements and comprehensive accessories The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORKING AREA Centre height: 160 mm Swing diameter over bed: 320 mm Guedpfx Ashw N Ntog Rjk Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Morse taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large and clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Operation screens switched via swipe gestures - Operation functions accessible via app manager - Control fields can be freely configured, positioned, and scaled - Drawings/sketches in PDF format can be imported via USB and individually zoomed - Video-assisted machine maintenance - Context help menu (instead of the WEILER VC plus screen display) - Coolant system, 18 liters including coolant pump The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For equipment details, please contact us.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 Gsdpfxjvrcqds Ag Reuk >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: baru, Tahun pembuatan: 2024, Swing diameter over bed: 350 mm Swing diameter over cross slide: 196 mm Turning length: 650 mm Center height: 170 mm Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis ACU-RITE digital readout including constant cutting speed and traversable over the entire bed length, MULTIFIX quick-change toolpost, size MB * For more information regarding the exact standard equipment Gujdpfx Aswp Tpkog Rok and available options, please visit our website or contact us directly *

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted in RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test report Gjdpfjv D Ip Nex Ag Rjuk Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard to the rear - Removable chip tray - Operating manual - Used, as seen -

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads Guodpfjwrm Dtox Ag Rsk About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1974, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Commodor Year of manufacture: 1974 - overhauled Newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Geometric acceptance with inspection protocol Equipment: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen - Godpjmgaddjfx Ag Reuk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Gedpfewthbijx Ag Rjuk A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: baru, Precision lead and feed screw lathe Make: GDW Model: LZ 280 VS comfortline Condition: New machine with infinitely variable speed control and infinitely variable feed regulation to the highest safety standard Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: The latest "comfortline" display generation is already included in the base price, offering numerous innovations and practical features: - 9'' TFT colour screen - Technology memory for 99 tools - Oriented spindle stop via teach-in button - Input for constant speed or constant cutting speed (V = c) - Selectable speed limitation - Plain text error and status messages - Feed and thread pitch input via image-supported masks - No more need to change or purchase additional change gears for standard thread cutting! Also included as standard: - Integrated LED machine light in enclosure - Size A quick-change tool post with turning tool holder - Lead screw cut-off with key - Main drive brake system - Sliding chuck guard with limit switch monitoring - Removable chip guard rear panel - Movable splash guard cover - Pull-out chip tray Gedecunqgspfx Ag Reuk - Simple bed stop (fixed longitudinal stop) - Central lubrication - Reduction sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 - 2 fixed centre points DIN 806-MK 3 - Set of operating tools with tool bag, set of keys, oil gun - 5 spare shear pins - 2 operating manuals with spare parts lists, electrical documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm Guedpfx Agswag Ste Rok >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: baru, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 280 VS-G basicline Condition: New machine with stepless feed adjustment built to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: GDW control panel with feed potentiometer - Travel direction display - Spindle speed indication - Teach-in for travel path during threading - Input for feed and thread pitches - Thread pitches: metric, inch, module, DP GDW 3-axis position display - 6" TFT colour display - Radius / diameter display - Tool memory for 100 tools - Switching between mm/inch - Axis coupling Z / Zo - Taper calculation - Calculator - Graphical entry assist - USB Port Guedpfx Aefbmliog Rok - Automatic standby operation Also included as standard: - LED machine light integrated into machine guard - Quick-change tool post size A with turning tool holder - Leadscrew cut-off with key - Main drive brake device - Sliding chuck guard with safety interlock - Removable chip guard rear wall - Sliding splash guard - Pull-out chip tray - Simple bed stop (fixed longitudinal stop) - Central lubrication - Reduction sleeve for main spindle internal taper ME 50/Morse taper 3 - Protective flange for spindle nose DIN 55027-5 - 2 fixed centres DIN 806-MT 3 - Set of operating tools with tool bag, set of keys, oil gun - 5 replacement shear pins - 2 operating manuals with spare parts lists, electrical documentation

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Gjdpfx Asvrdlcog Reuk Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: baru, Lead and feed screw lathe Manufacturer: ROMI Model: T240 x 1000 Condition: New machine Centre height: 220 mm Centre distance: 1,000 mm Standard equipment includes: Guodpfob Suakex Ag Rjk - 3-axis digital readout FAGOR Innova 30i-T - Coolant system - Bed stop for automatic shut-off - Quick-change tool post base body size B - Operating manual

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm Gusdpfx Ajwvuf Teg Rek >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Guedjvambcjpfx Ag Rok Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.