Beli Mesin bubut poros penggerak/pengarah dengan diameter pembubutan di atas ranjang 300–399 mm bekas (189)

Kondisi: diremajakan ulang (bekas), Maschine mit Flachbett Spitzenweite: 1.270 mm (50") Umlaufdurchmesser über Bett: 380 mm (15") Umlaufdurchmesser über Planschlitten: 230 mm (9") Spindeldrehzahlen: 25 bis 2.000 U/min (16 Stufen) Spindelbohrung: 51 mm (2" Durchgang) Vollständiger Gewindeschneidsatz (Längs- und Quervorschub) Planscheibenaufnahme: D16 Reitstockkonus: MK 4 Hedpsv I Ddqofx Ag Rofd 3- und 4-Backenfutter sowie Planscheibe Kühlmitteleinrichtung 2-Achsen-Digitalanzeige (DRO) Hauptmotor: 5,5 kW (7,5 PS) Maschine in gutem Zustand Gewicht ca.: 1,5 t Abmessungen ca.: 2.100 x 1.200 x 1.500 mm Schnellwechselstahlhalter mit 3 Einsätzen

Kondisi: diremajakan ulang (bekas), Gapbett-Drehmaschine Hfodpfxeq N Ay Ae Ag Red Spitzenweite: 1.520 mm Umlaufdurchmesser über Bett: 560 mm Spindeldrehzahlen: 18 - 1400 U/min Spindelbohrung: 90 mm (3,5") Spannfutteraufnahme: D1-11 Reitstockkegel: Morsekonus Nr. 5 Schnellwechselstahlhalter mit 4 Haltern & Schlüsseln Neues 3-Backenfutter Kühlmitteleinrichtung Neues 2-Achsen-Digitalanzeigesystem (DRO) Spannfutter-Schutzvorrichtung: wird noch bestätigt 6 Monate Gewährleistung

Kondisi: bekas, de-fi-01 Hsdsw Uf Hwopfx Ag Rofd

Kondisi: baru, centre length ----- 1000 mm centre height ----- 180 mm turning diameter ----- 360 mm spindle bore ----- 38 mm bed width ----- 203 mm spindle speed ----- 45-1800 rpm motor ----- 2.4 kW weight ----- 880 kg Hjdpfx Aeq E Iyzjg Rofd INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post, Multifix type TOOE5 with 4 tool holders * 3-jaw chuck, 200 mm * 4-jaw chuck, 200 mm * Faceplate, 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest * Foot brake (CE) * Electric brake (CE)

Kondisi: baru, Machine according to DIN 8605: Lathe with increased precision. Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Hsdjdctnbjpfx Ag Refd Bed carriage guide length: 380 mm Turning tool cross-section: 20x20 mm Distance between turning centre and top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Main spindle: Spindle mount according to DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40–3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feeds: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4–7.0 mm 32 imperial threads (with optional gear set D3Z200): 56–4 tpi 28 module threads (with optional gear set D3Z200): 0.2–3.5 32 diametral pitch threads (with optional gear set D3Z200): 112–8 Tailstock: Quill diameter: Ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights: Between centres: 50 kg Supported with tailstock: 150 kg Other basic equipment (standard accessories): Including machine stand and integrated 3-axis digital readout, German, with colour display 1 longitudinal stop 1 centre, taper 1:22, DIN 7178 1 centre MT3 1 tommy bar 1 wrench 1 grease gun 3 hexagonal bolts M16x60 - DIN 933 3 hexagonal nuts M16-8 DIN 934 1 single tool holder 1 key A13x17 DIN 837 1 open-ended spanner SW 19 1 open-ended spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 electrical cabinet key 1 operating manual including spare parts list 1 electrical documentation 1 test protocol Packaging (for truck transport with pallet and plastic cover) Machine complies with CE Note: Images display, among others, special equipment and accessories!

Kondisi: baru, Swing over bed 320 mm Swing over cross slide 200 mm Turning length 900 mm Swing in gap 320 mm Spindle speed range 75 - 2000 rpm Centre height 160 mm Spindle bore 38 mm Tailstock quill taper MT 3 Supply voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space required approx. 1.6 x 0.75 x 1.7 m SINO digital readout 3-jaw chuck 160 mm 4-jaw chuck 160 mm Hodpfehwavrex Ag Rjfd Face plate 250 mm Fixed steady rest Quick-change tool post with 4 tool holders Machine lamp Chip tray, chip guard Hardened and ground bed ways Chuck guard Machine tools

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 330 mm, lubang spindel: 52 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 160 mm, diameter pembubutan di atas carriage atas: 160 mm, lebar di tengah: 1.000 mm, panjang pembubutan: 1.000 mm, panjang total: 1.800 mm, lebar total: 650 mm, tinggi total: 1.400 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 70 rpm, 1051-230621 Hedpfx Aeyac Enog Rjfd

Kondisi: bekas, Tahun pembuatan: 1960, de-001 Hfodpfxsx U A Igo Ag Red

Kondisi: bekas, Tahun pembuatan: 1965, de_001 Hsdpjxylq Eofx Ag Rofd

Kondisi: baik (bekas), Centre distance: 800 mm Spindle bore: 38 mm Hjdpjukrtnofx Ag Refd Centre height: 165 mm Swing over bed: 330 mm Swing over cross slide: 170 mm Spindle speed: 24–2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm Hodpfxjvrcqdj Ag Rjfd >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts Hjdpfx Agovrckqj Refd >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Hodpfx Aowvuf Teg Refd Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Hedpjvrdlcsfx Ag Rofd Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition. Hjdpewrm Dtsfx Ag Rsfd

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm Hsdpfx Ajwthbisg Rjfd >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: Hfsdpewag Stefx Ag Red >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: baru, Tahun pembuatan: 2025, CONDOR VC plus The new benchmark in conventional precision lathes. A high-quality, high-performance, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as for training and education purposes. Superior quality, energy efficiency, precision, and universal suitability for use in production, training, and further education. Key features include: - Future-oriented technology - Exceptional accuracy - Long service life - Operator-friendly ergonomics - Minimal space requirements - Comprehensive range of accessories The consistent and innovative advancement of the proven Condor series represents an economical and intelligent solution for your daily machining needs. Technical Specifications: WORKING AREA Centre height 180 mm Swing over bed 360 mm Swing over cross slide 190 mm Distance between centres 800 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 6 Spindle bore 57 mm Spindle diameter at front bearing 90 mm MAIN DRIVE Drive capacity at 60%/100% duty cycle – / 10.5 kW Speed range 25 – 4,000 rpm Number of speeds Infinitely variable FEED RANGE Number Infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill stroke 110 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus touchscreen display - Large, clearly arranged 15" touchscreen, rotatable and pivotable, 1366 x 768 resolution - Switching between operating screens via swipe gesture - Operating functions accessible through App Manager Hodeqwipnspfx Ag Rjfd - Operating panels can be freely configured, placed, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-assisted maintenance support - Contextual help menu (instead of WEILER VC plus display) The machine is available immediately and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For further information regarding equipment options, please contact us.

Kondisi: baik (bekas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Infinitely variable speed from 15 to 3250 rpm 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool holder size B with 4 inserts Machine light, chuck guard with electrical interlock, machine feet Hfedpsuqkf Nsfx Ag Rsd 1 x revolving centre, 1 x revolving centre with pressure gauge 1 x drill chuck with taper shank The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing is possible by appointment.

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Hsdowhzcpjpfx Ag Refd Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.

Kondisi: bekas, Tahun pembuatan: 2000, gebrauchte-condor-ac-teilueberholt Hfodox E Um Nopfx Ag Rod

Kondisi: bekas, Tahun pembuatan: 2003, nomor mesin/kendaraan: 1527, mesin bubut poros utama dan poros penuntun bekas COLCHESTER Triumph VS 2500 Tinggi senter: 195mm Panjang benda kerja antara senter: 650mm Lubang spindle: 54mm Kecepatan variabel tanpa tingkat dari 14-2500 rpm Pinol kepala lepas MK5, perangkat pendingin, perangkat pemotong ulir cepat Display digital FAGOR NUP 300 TS-RS 1 x chuck tiga rahang RÖHM, pembatas drum 5 posisi, pembatas spindle berlubang Lampu mesin, 1 x kepala revolver PARAT 4 posisi, 4 x dudukan alat ganti PARAT center yang ikut berputar dan chuck bor quick-change Hjdpfx Aox Hrumsg Rjfd Mesin tersedia di lokasi kami di 71334 Waiblingen-Beinstein dan siap langsung digunakan. Peninjauan mesin dapat dilakukan dengan perjanjian.

Kondisi: baik (bekas), Mesin bubut spindle L&Z WEILER COMMODOR B dari institusi pendidikan -Penanda GS Hfedsyf U E Dopfx Ag Red -Display digital 3-sumbu "BARU" -Tinggi center 180 mm -Jarak antara centernya 1000 mm -Diameter spindle 56 mm -Kecepatan spindle 15 - 2000 rpm -Sumbu otomatis memanjang & melintang -Untuk ulir / metrik / inci / modul / pitch diameter -Perlindungan chuck elektrik -2x Emergency Stop -Multifix dengan sisipan -Cekam empat rahang - Röhm -Dinding penahan serpihan -Unit pendingin -Kondisi original sangat terawat -Dokumentasi Dimensi: PxLxT 2,3x1,2x1,7 meter / Berat 1600 kg Kesalahan penulisan/tampilan dapat terjadi

Kondisi: bekas, L + Z lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine no. 8169 Year of manufacture: 2002 Centre distance 1000 mm Swing over bed 320 mm Centre height over bed 160 mm Swing over cross slide 190 mm Centre height over cross slide 95 mm Spindle bore 32 mm Spindle speed (right-hand rotation): 85 - 2000 rpm, 12 steps Spindle speed (left-hand rotation): 130 - 1300 rpm, 6 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55027 size 5 Tailstock taper: MT 3 Drive power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed control with 12 gearbox steps in machining direction - Spindle speed control with 6 gearbox steps against machining direction - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-position universal tool post - Coolant tank with pump integrated in the machine base Hfodpfx Ajvt U Tmog Rod - Spindle brake actuated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-action drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Required space (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LZ280/3, diameter putar di atas sled silang: 190 mm, lubang spindel: 43 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 330 mm, tinggi pusat: 165 mm, panjang pembubutan: 670 mm, gores kuas bulu: 90 mm, diameter quill: 45 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful geared-head lathe with a continuously variable spindle speed range from 30 to 4,000 rpm. The standard paint finish includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard, and chuck guard. Features & Accessories: ✅ 3-axis position display with 6'' color screen ✅ Multifix A quick-change tool post including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine lamp & K32 collet board ✅ Electromechanical end-stop system for threading/feeds Hfjdpfev Dan Dsx Ag Rjd ✅ Tool cabinet with telescopic pull-outs including operating tools Additional equipment package (optional): ➕ 3-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3–16 mm, B16/MK3) ➕ Live center MK3 & boring bar holder ➕ 4 additional turning tool holders & 1 boring bar holder 📦 Delivery: ✔️ Disposable packaging & secure transport incl. insurance Perfect for precise and demanding turning applications in industry and workshops! 🚀