Beli Mesin bubut spindel pengarah/penarik, diameter pembubutan di atas alas 400–499 mm bekas (218)

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3515150, diameter putar di atas sled silang: 450 mm, lubang spindel: 52 mm, diameter pembubutan di atas alas geser: 600 mm, tinggi pusat: 300 mm, panjang pembubutan: 750 mm, diameter quill: 90 mm, jarak gerak quill: 120 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 10 rpm, diameter ayun di atas peluncur silang: 450 mm, gerak cepat sumbu X: 24.000 m/menit, pergerakan cepat sumbu Z: 24.000 m/menit, jarak pergerakan sumbu X: 305 mm, jarak lintasan sumbu Y: 50 mm, jarak gerak sumbu Z: 750 mm, diameter luar chuck: 200 mm, daya motor spindle: 17.000 W, Drehmaschine (Lathe) mit angetriebenen Werkzeugen, Y-Achse und Messtaster. Gujdpfxownp Sxs Ag Rsk

Kondisi: baik (bekas), diameter putar di atas sled silang: 267 mm, diameter pembubutan: 432 mm, lebar di tengah: 1.500 mm, 3-jaw chuck, diameter 250 mm Tool post Steady rest Gusdpfxjtq Exre Ag Rsk Tailstock Coolant system Technical Data: Centre distance: 1500 mm Swing over bed: 432 mm Swing over cross slide: 267 mm Swing in gap: 710 mm Spindle bore: 76 mm Spindle speed range: 20–1600 rpm Drive power: 9.3 kW Machine weight approx.: 2310 kg Technical data, accessories and machine description are non-binding.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, de-001 Guedpjx D Uf Tjfx Ag Rek

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Jarak puncak: 750 mm Diameter putar di atas tempat tidur: 430 mm Lubang spindle: 42 mm 24 kecepatan putar: 14 - 1400 rpm Daya penggerak: 5,5 PS Berat sekitar: 2 ton Aksesori: penyangga tetap, Multifix, chuck Forkardt Kondisi: Mesin berjalan dengan baik; rel pemandu arah memanjang sudah kurang baik. Gusdpfxjx Dm Sxe Ag Rok Mesin ditawarkan dengan harga terjangkau dan hanya cocok untuk pekerjaan sederhana.

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Tailstock quill stroke: 180 mm Guedpfxou Ix Hds Ag Rsk Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included

Kondisi: baru, Tahun pembuatan: 2025, For up-to-date prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Net weight: approx. 1965 kg Working Ranges: Center height: 230 mm Center distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter over bed bridge: 690 mm Swing diameter over cross slide: 270 mm Turning length in bed bridge: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Spindle speed range: 25 – 2000 rpm Electrical Data: Drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Cooling lubricant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar feed diameter: 58 mm Maximum toolholder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill stroke: 130 mm Tailstock quill diameter: 60 mm Thread Pitches: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Godpfxoq Ukbpe Ag Reuk Number of module threads: 34 Travel: Top slide travel: 125 mm Cross slide travel: 285 mm Carriage longitudinal travel: 1805 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Facing feed range: 0.014 – 0.784 mm/rev Number of facing feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 19.900 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3515170, diameter putar di atas sled silang: 450 mm, lubang spindel: 52 mm, diameter pembubutan di atas alas geser: 600 mm, tinggi pusat: 300 mm, panjang pembubutan: 1.250 mm, diameter quill: 90 mm, jarak gerak quill: 120 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 10 rpm, diameter ayun di atas peluncur silang: 450 mm, gerak cepat sumbu X: 24.000 m/menit, pergerakan cepat sumbu Z: 24.000 m/menit, jarak pergerakan sumbu X: 305 mm, jarak gerak sumbu Z: 1.250 mm, diameter luar chuck: 200 mm, daya motor spindle: 30.000 W, Drehmaschine mit angetriebenen Werkzeugen und Messtaster. Guodewnqk Aspfx Ag Rek

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 185, diameter putar di atas sled silang: 800 mm, lubang spindel: 180 mm, diameter pembubutan: 1.000 mm, diameter pembubutan di atas alas geser: 1.000 mm, panjang pembubutan: 2.000 mm, diameter pelat muka: 900 mm, Strug Potisje PA - 50 - DC. Izvanredno stanje. U kompletu sa fiksnom i pokretnom lunetom, kao i prednjom pločom. Guodpjww Igmjfx Ag Rjk Konusni nastavak na strugu.

Kondisi: bekas, Swing diameter / mm Turning length / mm Swing diameter over bed slide / mm Technical data – Model 230 DIMENSIONS Center height above bed: 230 mm Distances between centers: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Maximum turning diameter: on bed: 465 mm on slide: 278 mm on fixed steady rest: 200 mm on traveling steady rest: 160 mm GAP (SWING OVER GAP) Gusdpjwz Rywofx Ag Rsk Width of gap: 300 mm Distance between faceplate edge and gap: 150 mm Maximum turning diameter in gap: 690 mm SPINDLE Front bearing diameter (internal): 110 mm Rear bearing diameter (internal): 95 mm Bore diameter: 77 mm Mounting type - Cam Lock: 6" Spindle taper - Taper: 1 : 20 Spindle taper - Morse Taper (No.): 5 Spindle speed ranges: Preselect slow - RPM: 15÷1000 Preselect normal - RPM: 22÷1500 Preselect fast - RPM: 30÷2000 FEEDS (without gear change) - No.: 108 Longitudinal feed range per rev.: 0.04÷4 mm Cross feed range per rev.: 0.02÷2 mm Leadscrew - diameter: 40 mm Leadscrew pitch: 12 mm THREADS (without gear change) Metric - No. 54 from: 0.5÷28 mm Module - No. 54 from module: 0.25÷14 Whitworth - No. 54 from TPI: 56÷1 Diametral Pitch - No. 54 from D.P.: 112÷2 Inch (Imperial) - No. 54 from inch: 1/32 ÷ 13 3/4" TAILSTOCK Quill diameter: 75 mm Quill stroke: 220 mm Quill taper - Morse Taper No.: 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. 2,920 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, DIJUAL - Mesin Bubut Emcomat 17D Tahun 2005 Perjalanan sumbu X/Z: 220 / 710 mm Jarak antara pusat: 700 mm Ketinggian di atas pusat: 170 mm Gusdpfx Agjxyziko Rsk Kecepatan maksimum: 3000 rpm Hidung spindle: DIN 55029 Daya penggerak maksimum: 5,3 kW Diameter quill: 50 mm Kone dalam: MT3 Langkah quill: 120 mm Dimensi (PxLxT): 1650 x 1060 x 1635 mm Berat mesin: 755 kg Chuck 3 & 4 Rahang

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Optimum D 1340 GDE, year 2001, in excellent condition – previously a school machine – Swing over bed: 330 mm Swing over cross slide: 160 mm Turning length: 800 mm Total power requirement: 2 kW Machine weight approx.: 400 kg Space requirements approx.: 2000 x 1000 x 1600 mm Bar capacity: 38 mm Spindle speed range: 70 – 2000 rpm Gedpfsvutyhex Ag Rsuk Spindle nose: Feed range: 0.025 – 2.553 mm/rev Thread cutting capability: Metric: 0.25 – 11 mm Imperial: 4 – 112 TPI Tailstock: MT 3 Controls: conventional 3-jaw chuck Location: in stock, 54634 Bitburg - Available at short notice -

Kondisi: baru, Tahun pembuatan: 2024, For delivery times and up-to-date pricing, please make a direct inquiry. Dimensions and Weights: Length (Product): approx. 1935 mm Width/Depth (Product): approx. 780 mm Height (Product): approx. 1740 mm Weight (Net): approx. 765 kg Working Capacities: Centre Height: 200 mm Centre Distance: 1,000 mm Swing Diameter over Bed: 400 mm Swing Diameter over Cross Slide: 250 mm Speed Range: Number of Speed Ranges: 8 Speed Range: 70 – 2,000 rpm Electrical Data: Drive Motor Power: 2.2 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Coolant System: Coolant Pump Motor Power: 100 W Spindle: Toolpost: SWH 3-E Spindle Mount: Camlock DIN ISO 702-2 No.5 Spindle Bore/Bar Capacity Diameter: 53 mm Spindle Taper: MT 6 Tailstock: Tailstock Taper: MT 4 Tailstock Quill Travel: 110 mm Thread Cutting: Metric Thread Pitch: 0.4 – 7 mm/rev Number of Metric Threads: 32 Imperial Thread Pitch: 56 – 4 TPI Number of Imperial Threads: 31 Travel: Cross Slide Travel: 98 mm Compound Slide Travel: 185 mm Bed Slide Travel: 850 mm Feed: Longitudinal Feed Range: 0.014 – 0.38 mm/rev Number of Longitudinal Feeds: 26 Cross Feed Range: 0.052 – 1.392 mm/rev Number of Cross Feeds: 32 Tool Clamping: Toolholder Mounting Size: 16 mm Gujdpfx Agjq T R Dmo Rek Electrical Connection: Total Power Requirement: 3.0 kW

Kondisi: baru, Turning diameter: 400 mm Turning length: 1000 mm Speed range: 70 - 2,000 rpm Weight approx.: 500 kg Description: - Lead and feed screw lathe featuring a robust design and straightforward operation. TM 4010D with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of headstock housing due to heavily ribbed GG25 cast iron - Hardened and ground face spindle ensures outstanding accuracy and durability - High material removal during roughing operations allows for fine surface finishes and tight tolerances - Wide range of threads and feeds without having to change gears in the gear train - Bed guideways hardened and precision-ground - Precisely running main spindle mounted in precision ball bearings - Mechanical longitudinal feed disengagement on the carriage with four adjustable eccentrics - Electronic main spindle brake - All control elements (electrical) are easily accessible from a central location - 4-position longitudinal stop - Quick change tool post SWH 3 TM 4010D – Digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed, and glare-free - Increased working accuracy - Error rate is reduced - X, Y, Z0, Z axes with 8-digit display each - Glass scales Equipment details: Feed gearbox – all gears made of steel - hardened and ground - Shafts run on needle bearings - all components lubricated in oil bath Apron – entirely sealed housing - With safety device against simultaneous operation of threading and feed mechanism Tailstock – hardened and ground quill - generously dimensioned - quill with scale Prismatic bed – heavily ribbed cast iron - high rigidity Machine lamp – complete illumination of work area Main spindle – precision running - high load capacity - mounted in precision taper roller bearings Machine base – pre-assembled Tool compartment Operator panel – user-friendly membrane keypad - machine lamp - coolant pump - direct drive - two-stage motor switch - emergency stop pushbutton Coolant tank – removable - level indicator - easy and complete drainage and cleaning Gjdpfxed Eauke Ag Reuk Control cabinet – clearly arranged - 24V DC power supply - all contactors and relays from Schneider or Siemens Chip tray – foldable - easy chip removal Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6-MK 4 - Change gear set Technical Data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phases: 3 Current type: ~ Network frequency: 50 Hz Spindle mount: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar passage diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Centre distance: 1,000 mm Swing over bed: 400 mm (continues if required)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Kontrol: Siemens 828 D Umum Kecepatan putar: 3.000 rpm Daya: 9 kW Torsi: 140 Nm Diameter chuck: 210 mm (maks. 260 mm) Lubang spindle: 65 mm Hidung spindle: A2-6'' Area kerja Jarak pusat: 1.000 mm Gujdex Ahdtopfx Ag Rsk Tinggi pusat: 215 mm Diameter di atas bed: 430 mm Diameter di atas carriage: 200 mm Lintasan sumbu Z: 1.065 mm Lintasan sumbu X: 220 mm Sistem alat Revolver: Kepala revolver PARAT 4 posisi RD 2 Tailstock Teknologi: digerakkan Senter: MK-4 (berputar) Perlengkapan Manajemen serpihan: Bak serpihan Sistem pendingin: Pompa pendingin 5 bar Set rahang: 1 set rahang dikeraskan

Kondisi: bekas, DDE_hu_it_lt_lv_nb_nl_pl Gsdpfx Agoxxb E Aj Rjuk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1968, feindrehmaschine-135-schaublin Gsdpfx Agjw Rd Hbe Reuk

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 220 mm, lubang spindel: 50 mm, diameter pembubutan: 400 mm, diameter pembubutan di atas alas geser: 400 mm, diameter pembubutan di atas carriage atas: 220 mm, tinggi pusat: 200 mm, panjang pembubutan: 1.000 mm, TOS SN 40B Mesin Bubut dengan Tempat Tidur Celah Gusdoxxyy Sspfx Ag Rek

Kondisi: baru, Tahun pembuatan: 2025, For delivery times and up-to-date pricing, please inquire directly. Condition: New machine Centre height: 200 mm Centre distance: 1,000 mm Gsdsq Ui Tdjpfx Ag Rsuk Spindle speed: 70 - 2,000 rpm (8 steps) Standard equipment includes: - 3-axis digital readout DPA 21 - Machine base - 3-jaw chuck 200 mm - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed centre MK 4 - Fixed steady rest - Travelling steady rest - Quick-change toolpost body E - Tool holder ED - Chuck guard, electrically interlocked - Oil filling - Operating tools - Operating manual

Kondisi: baru, Tahun pembuatan: 2025, CORMAK 400 metal lathes are the new, improved version of the popular metalworking lathes. Among other enhancements, the tool post guard has been upgraded, the spindle bearing system improved, and a new digital readout has been installed. These machines are suitable for production plants, workshops, and tool rooms, making them ideal for single-unit and small batch production. NEW, IMPROVED MODEL!!! - High-quality, reinforced spindle bearing system - New guard system compliant with CE standards - Latest model digital readout for axes - Reinforced and modernized lathe base with tool drawers and a pull-out chip tray Machine features - REINFORCED, RIBBED BEDWAY PROVIDES MAXIMUM VIBRATION REDUCTION; BED IS ALSO PRECISELY GROUND AND HARDENED - 2-AXIS DIGITAL READOUT INCLUDED AS STANDARD - OPTIMAL WORK RESULTS THANKS TO LARGE 52 MM SPINDLE BORE - ADEQUATE BED WIDTH FOR STABLE AND PRECISE WORKING CONDITIONS - MACHINE EQUIPPED WITH HIGH-QUALITY, REINFORCED SPINDLE BEARING SYSTEM - EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND THE INCLUSION OF BOTH FEED ROD AND LEADSCREW - HARDENED GEARS IN SPINDLE GEARBOX - ADJUSTABLE OVERLOAD CLUTCH ON FEED SHAFT - THREAD CUTTING ACROSS FULL RANGE WITHOUT THE NEED TO CHANGE GEARS IN THE GEARBOX - FEED SELECTION LOCK: VIA LEADSCREW OR FEED ROD - REMOVABLE BRIDGE ALLOWS MACHINING OF LARGER DIAMETER WORKPIECES - PULL-OUT CHIP TRAY AND TOOL DRAWERS FOR MORE EFFICIENT WORKFLOW Technical Data Maximum turning diameter: 400 mm Maximum turning diameter above carriage: 250 mm Maximum turning diameter in gap: 520 mm Turning length between centers: 1000 mm Bed width: 218 mm Spindle nose: CAMLOCK D5 Spindle taper: MT6 Spindle bore: 52 mm Spindle speed range: 65–1810 rpm Number of spindle speed ranges: 16 steps Longitudinal feed range: (40) 0.053–1.291 mm/rev Cross feed range: (40) 0.011–0.276 mm/rev Maximum tool size: 25 mm x 25 mm Metric threads: 0.4–7 mm Inch threads: 4–60 T.P.I. Module threads: (22) 0.4–3 mm Diametral pitch threads: (28) 8–84 D.P. Tailstock sleeve diameter: 50 mm Tailstock quill stroke: 110 mm Tailstock quill taper: MT4 Motor power: 2.2 kW Coolant pump power: 0.1 kW Weight: 640 kg Dimensions: 2000 x 820 x 1650 mm Standard Equipment - 2-axis digital readout - Fixed steady rest - Travelling steady rest - 3-jaw chuck 200 mm - 4-jaw chuck 200 mm - Face plate 280 mm - MT4 live center x2 - MT6/MT4 reducing sleeve Guodpfx Aoiz Tczsg Rek - Set of service wrenches For more information, please visit our website.

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 640 mm, tinggi pusat: 320 mm, panjang pembubutan: 2.000 mm, Mesin bubut poros utama dan penarik VDF dengan tampilan digital, dudukan atas digerakkan, umpan 3-sumbu dengan gerak cepat, chuck 3 rahang, piring cekam, dudukan pahat Multifix dengan 5 sisipan. Gjdjxz Edzjpfx Ag Rouk

Kondisi: bekas, Translation: - Turning length: 2000 mm - Centre height: 250 mm - Swing over bed: 500 mm - Swing over cross slide: 330 mm - Swing in gap: 580 mm - Spindle speeds: 14-2240 rpm Equipped with: - 250 mm three-jaw chuck - 370 mm four-jaw chuck - 2 fixed steady rests - Quick-change tool post with 12 holders - Roller-type tailstock centre - Grinding attachment - Various turning tools Gsdpfx Agexv Shpj Rjuk

Kondisi: baru, en-GB Gsdpfexaaxwex Ag Reuk

Kondisi: bekas, de-to-hu-it-lt-lv-nb-nl-pl Godjxwp Enspfx Ag Rouk

Kondisi: bekas, nomor mesin/kendaraan: 170009, Swing over bed: 400 mm Swing over cross slide: 250 mm Turning length: 1000 mm Swing over gap: 520 mm Centre height: 200 mm Cross slide travel: 230 mm Gujdodmrcrepfx Ag Rjk Bed width: 218 mm Main spindle bore: 52 mm Spindle taper: MT 6 Speed range: 55-2000 rpm Swivelling angle: 90 degrees Tailstock travel: 50 mm Tailstock taper: MT 4 Thread cutting metric: 0.4-7 mm Thread cutting Whitworth: 4-60 TPI Total power requirement: 2.2 kW Space requirements approx.: 1940 x 820 x 1545 mm Machine weight approx.: 750 kg Tailstock quill travel: 110 mm Thread cutting module: 0.4-3 mm Thread cutting diametral: 8-84 DP Manufacturer’s Description: High-quality, robust and precise lead and feed screw lathe. Ideal for use in production, workshops, repair shops, and training facilities. Strongly ribbed prism bed, induction hardened and ground. Main spindle runs in an oil bath, hardened and ground with 2 adjustable precision bearings. Toolmaker accuracy according to DIN 8606. Strongly ribbed prism bed, induction hardened and ground for maximum accuracy Toolmaker accuracy to DIN 8606 Main spindle gear wheels easy-running, induction hardened and precision ground D-5 Camlock spindle mount for quick chuck changes Large main spindle bore 52 mm Wide main spindle speed range 55–2000 rpm With removable gap bridge for large swing diameters up to 520 mm With chuck guard, leadscrew guard, and foot brake according to CE With four-way toolpost (omitted with quick-change toolpost) With longitudinal stop With coolant system Powerful main drive motor Inclusive package: - High-performance 3-jaw chuck K11-200/D5 up to 3000 rpm, Ø 200 mm - travelling steady rest - fixed steady rest - face plate - splash guard - chuck guard - LED work light - coolant system - foot brake - main spindle cover - carriage/spindle guard Optional accessories: - 4-jaw chuck K72-200/D5 - i200 LCD digital readout - Quick-change toolpost with inserts

Kondisi: bekas, trans_001 Gujdpfxjxwp Ebo Ag Rjk