Beli Mesin bubut lead/drag spindle dengan diameter putar minimal 1000 mm di atas ranjang bekas (88)

Kondisi: baru, Tahun pembuatan: 2025, 0554 Hodpfx Aex Urtroa Neng

Kondisi: baik (bekas), Tahun pembuatan: 1980, diameter pembubutan di atas alas geser: 1.040 mm, diameter pembubutan di atas carriage atas: 710 mm, panjang pembubutan: 2.000 mm, lebar tempat tidur: 600 mm, HU-20240620-001 Hnsdpfxex Tgr Ts Aa Nsg

Kondisi: baik (bekas), Schwingdurchmesser über Bett: 1250 mm Maximale Werkstücklänge: 10000 mm Maximale Werkstückmasse bei Bearbeitung zwischen Spitzen mit Lünetten: 10000 kg Hnodpfxjvprffs Aa Nog Werkzeughöhe im Werkzeughalter: 50 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 105 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang total: 5.500 mm, lebar total: 2.130 mm, tinggi total: 1.550 mm, berat keseluruhan: 12.300 kg, berat benda kerja (maks.): 11.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-135B/4M has been comprehensively rebuilt and modernized by us. It features technical parameters that are consistent with the technical and operational documentation of a new machine, complies with WOT technical acceptance conditions and Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul to order, delivery time 3.5 months from placement of order. Technical data: - Centre distance / turning length: 4000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 105 mm - Maximum workpiece weight between centres: 8,000 kg - Maximum workpiece weight between centres + 1 steady rest: 10,000 kg - Maximum workpiece weight between centres + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed ranges (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 6500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 12,300 kg Hodpfxeflaxvj Aa Njng Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, installation, and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Kondisi: baik (bekas), Tahun pembuatan: 1992, Diameter ayunan di atas alas: 1000 mm Diameter spindle: 128 mm Hnjdpox T Dbfjfx Aa Njg Panjang pembubutan: 8000 mm Kebutuhan daya total: 22 kW Berat mesin sekitar: 20 t

Kondisi: bekas, Tahun pembuatan: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel Z-axis, flat: approx. 500 mm Cross slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-axis: longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-axis: cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Hjdpfx Aju Tq U Isa Neng Equipment: Face plate Ø 1000 mm 4-way toolpost Steady rest Ø 250 closed Accessories: Four-jaw chuck Ø 630 mm

Kondisi: baru, Tahun pembuatan: 2025, Metal Lathe TYTAN 750 PRO (VARIO) 400V (without base) with stepless spindle speed control. This lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming holes. It is typically used in small industrial plants, workshops, garages, etc. The machine version without a base. The TYTAN 750 PRO universal lathe features ergonomic, stepless spindle speed control, tailored to meet user needs. Reduced setup time when working with a wide range of workpiece sizes translates into increased efficiency and ease of use. VARIO version – electronic, stepless adjustment of spindle speed via a DC motor and voltage controller. This ensures optimal rotational accuracy of the lathe chuck, resulting in higher-quality machined parts. Key features: - Modern DC motor with stepless spindle speed adjustment ensures user convenience and reduces calibration time. - LCD screen displaying spindle speed enables real-time monitoring and quick adjustments of spindle speed during cutting and threading mode setup. - Two spindle speed ranges: low (50–1125 rpm) for machining hard steels; high (100–2250 rpm) for precision turning at high speeds. - Thread cutting: metric – 18 types (0.2–3.5 mm), imperial – 21 types (8–56 TPI). Left- and right-hand threading capability. - Automatic longitudinal feed with 6 speed ranges (0.07–0.40 mm/rev) – significantly shortens machining time without compromising quality, especially during the turning of long parts. - Fully compliant with EU directives (CE) and Polish as well as DIN standards. Technical specifications: - 3-jaw chuck: 125 mm - Maximum turning diameter over bed: 250 mm - Turning diameter over carriage: 150 mm - Turning length between centers: 750 mm - Maximum installed part length (chuck/tailstock): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Maximum tool size: 12 x 12 mm - Upper slide travel: 70 mm - Cross slide travel: 135 mm - Longitudinal slide travel: 650 mm - Spindle speed adjustment: stepless (L/H) - Spindle speed: L: 50-1125 rpm / H: 100-2250 rpm - Metric thread range (number/type): (18) 0.2 – 3.5 mm/rev - Imperial thread range (number/type): (21) 8-56 TPI Hnsdsvvlxlspfx Aa Neg - Longitudinal feed (number/type): (6) 0.07-0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock taper: MT2 - Motor power S1/S6: 1.1 / 1.32 kW - Dimensions L/W/H (without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Kondisi: baik (bekas), Tahun pembuatan: 1988, diameter putar di atas sled silang: 900 mm, lubang spindel: 105 mm, diameter pembubutan: 1.200 mm, panjang pembubutan: 5.000 mm, panjang total: 8.000 mm, lebar total: 1.800 mm, tinggi total: 1.550 mm, lebar tempat tidur: 650 mm, berat benda kerja (maks.): 10.500 kg, de-to-hu-it-lt-lv-nb-pl-pt-001 Hedpfx Ajwrxpbja Nong

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2655, diameter pembubutan: 1.250 mm, panjang pembubutan: 1.000 mm, panjang total: 2.750 mm, lebar total: 2.975 mm, tinggi total: 4.100 mm, kecepatan spindel (maks.): 250 rpm, kecepatan spindel (min.): 5 rpm, kecepatan rotasi (maks.): 2.500 rpm, kecepatan rotasi (min.): 5 rpm, jenis arus masuk: tiga fasa, berat keseluruhan: 17.500 kg, diameter cakram: 1.120 mm, berat benda kerja (maks.): 4.000 kg, diameter pelat muka: 1.120 mm, Vertikaldrehmaschine STANKO SEDIN 1512 (Vertikaldrehmaschine / Vertikaldrehbank) Die STANKO SEDIN 1512 ist eine konventionelle Vertikaldrehmaschine mit Revolver, die für schwere Dreh- und Bearbeitungsaufgaben großer und schwerer Werkstücke konzipiert wurde. Hergestellt in der ehemaligen UdSSR, zeichnet sich diese Maschine durch ihre robuste Bauweise aus und ist besonders für industrielle Schwermetallbearbeitung geeignet. Die Maschine verfügt über einen großen Planscheiben-Durchmesser von 1.120 mm und ermöglicht die Bearbeitung von Werkstücken mit einem maximalen Drehdurchmesser von 1.250 mm und einer maximalen Drehhöhe von 1.000 mm. Je nach Ausführung können Werkstücke mit einem Gewicht von ca. 3.200–4.000 kg aufgenommen werden. Der Drehzahlbereich des Planschisentisches liegt bei ca. 5 bis 250 U/min, wodurch vielseitige Drehoperationen an unterschiedlichen Materialien und Durchmessern möglich sind. Angetrieben wird die Maschine durch einen Hauptantrieb mit einer Leistung von ca. 30 kW. Die massive Einständerkonstruktion sowie das hohe Maschinengewicht von etwa 16.000–17.500 kg gewährleisten eine hohe Stabilität und Steifigkeit während der Bearbeitung. Die STANKO SEDIN 1512 eignet sich für schwere Dreh-, Plan-, Bohr- und Ausdrehoperationen an großen Bauteilen, wie sie im Maschinenbau, in der Schwerindustrie und in Reparaturbetrieben anfallen. Hauptmerkmale: * Konventionelle Vertikaldrehmaschine mit Revolver Hjdpox Sqrbefx Aa Nong * Große Planscheibe mit 1.120 mm Durchmesser * Drehdurchmesser bis 1.250 mm * Maximale Werkstückhöhe 1.000 mm * Werkstückgewicht bis ca. 3.200–4.000 kg * Drehzahlbereich ca. 5–250 U/min * Hauptantrieb mit ca. 30 kW Motorleistung * Robuste industrielle Bauweise Typische Einsatzbereiche: * Bearbeitung von großen Scheiben und Ringen * Schwermaschinenbearbeitung * Aus- und Plandrehen von Zylinderteilen * Instandhaltung und Reparaturwerkstätten * Schwerer Stahl- und Maschinenbau

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang total: 8.500 mm, lebar total: 2.130 mm, tinggi total: 1.550 mm, kecepatan rotasi (maks.): 630 rpm, kecepatan rotasi (min.): 5 rpm, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-135B2/6M has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical acceptance requirements of the WOT and Polish standards, and also fulfills the EU regulations. The machine is offered with a full 12-month warranty on spare parts and electrical components. Availability: Remanufactured to order, delivery time approx. 3.5 months from order confirmation Technical specifications: - Distance between centers / turning length: 6000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm Hnodpfxokyt Hlo Aa Njg - Swing in gap: 1650 mm - Spindle bore diameter: 120 mm - Powered top slide - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (low/high gear) - Overall dimensions: Total length: 8500 mm Width: 2130 mm Height: 1550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra charge: - 3- or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Kondisi: baik (bekas), Tahun pembuatan: 1993, Diameter ayun di atas tempat tidur: 1000 mm Lubang spindel: 128 mm Panjang bubut: 5000 mm Kebutuhan daya total: 22 kW Berat mesin sekitar: 16 t Kebutuhan ruang sekitar: 7,8 x 2,3 x 1,8 m Hnsdpox T A Ahefx Aa Njg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 2.000 mm, tinggi pusat: 1.000 mm, lebar di tengah: 4.000 mm, kecepatan spindel (maks.): 224 rpm, berat benda kerja (maks.): 12.500 kg, DETAIL TEKNIS Tinggi senter: 1.000 mm Diameter putar di atas tempat tidur: 2.000 mm Jarak antar senter: 4.000 mm Lubang spindle: 100 mm Kecepatan putar spindle: 11,2 - 224 rpm Berat benda kerja maks.: 12.500 kg DETAIL MESIN Daya: 55 kW Dimensi & Berat Dimensi (P x L x T): 5.400 x 2.600 x 2.550 mm Berat kosong: 15.000 kg Hjdpex Rbh Rjfx Aa Neng PERLENGKAPAN Tampilan digital Acu-Rite 3-A

Kondisi: baru, Tahun pembuatan: 2025, en Hodpfx Aasw H Raue Nsng

Kondisi: bekas, Tahun pembuatan: 1986, Technical details: Hodpfx Aaovgmlne Nsng Swing diameter over bed: 1000 mm Swing diameter over cross slide: 745 mm Turning length: 3000 mm Spindle speed range: 4.5 – 900 rpm Spindle bore: 110 mm Workpiece weight between centres max.: 12,500 kg Total power requirement: 30 kW Machine weight approx.: 9 t Space requirement approx.: 5.2 x 2.3 x 2 m 3-axis digital readout Rapid traverse, top slide feed 350 mm 1 fixed steady rest 1 faceplate, dia. 1000 mm Coolant system

Kondisi: baik (bekas), Tahun pembuatan: 1986, diameter pembubutan: 1.260 mm, * Jarak antara pusat: 11.000 mm Hjdpfx Aouh Slkea Nong * Diameter gulungan: maks. 1.260 mm * Berat maksimum benda kerja: 22,4 ton

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.550 mm, diameter pembubutan di atas alas geser: 1.550 mm, diameter pembubutan di atas carriage atas: 1.220 mm, panjang pembubutan: 6.000 mm, panjang total: 8.500 mm, lebar total: 1.600 mm, tinggi total: 1.600 mm, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the acceptance criteria of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Hnjdpfxov Ab Dqe Aa Nsg Availability: General overhaul on order, delivery time 3.5 months from order placement Technical specifications: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post - Rear safety guard along the entire length of the machine - Frequency inverter incl. soft-start function and potentiometer for stepless speed control

Kondisi: sangat baik (bekas), Brand: GEMINIS Hjdpfx Ajvnz Hvsa Njng Model: GE 650 Center height over bed: 315 mm Swing over bed: 650 mm Swing over cross slide: 390 mm Maximum swing in gap: 820 mm Gap length from spindle nose: 310 mm Longitudinal carriage width: 620 mm Cross slide width: 250 mm Cross slide travel: 360 mm Top slide travel: 220 mm Tailstock quill travel: 270 mm Quill diameter: 85 mm Bed width: 450 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang pembubutan: 5.000 mm, panjang total: 7.500 mm, lebar total: 2.130 mm, tinggi total: 1.550 mm, kecepatan rotasi (maks.): 630 rpm, kecepatan rotasi (min.): 5 rpm, berat benda kerja (maks.): 11.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-135B1/5M has been comprehensively overhauled and fully modernized by us. It features technical specifications that correspond to the technical and operational documentation of a brand-new machine, complies with WOT and Polish standard acceptance criteria, and also meets EU requirements (CE Declaration of Conformity). Hnsdsva Elaepfx Aa Nsg The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, ready for technical acceptance. Technical data: - Distance between centers / turning length: 5,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore: 120 mm - Motorized top slide feed for taper turning up to 450 mm length, 90° scale - Max. workpiece weight between centers: 8,000 kg - Max. workpiece weight between centers + 1 steady rest: 10,000 kg - Max. workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 2,130 mm Height: 1,550 mm Total weight: 13,200 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder, chip trays Additional equipment available at extra cost: - 3-jaw or 4-jaw chucks, various diameters and versions - Digital readout for 2 axes, including display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.000 mm, panjang pembubutan: 8.000 mm, panjang total: 10.500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, featuring extensive equipment as shown in the photos. Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as per photos: Hnodpfxsv Epk Dj Aa Nsg 1 x 4-jaw chuck 3 x steady rests

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.000 mm, panjang pembubutan: 8.000 mm, panjang total: 10.500 mm, A used lathe from the Italian manufacturer Leopold Pontiggia, model NH 500, is being offered for sale. Hjdpjv Epigjfx Aa Neng Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as shown in the photos: - 1 x 3-jaw chuck - 1 x 4-jaw chuck - 1 x steady rest - Various adapters

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.550 mm, diameter pembubutan di atas alas geser: 1.550 mm, diameter pembubutan di atas carriage atas: 1.220 mm, panjang pembubutan: 10.000 mm, panjang total: 12.500 mm, lebar total: 1.600 mm, tinggi total: 1.600 mm, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-155B2/10M has undergone a comprehensive rebuild and modernization by our company. It features technical parameters that match the technical and operating documentation of a new machine, meets the technical acceptance criteria of WOT and the Polish standards, and also conforms to EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: general overhaul on order, delivery time 3.5 months from order confirmation Technical data: - Distance between centers / turning length: 10,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers with 1 steady rest: 12,000 kg Hnjdpfxjva Ebns Aa Neg - Maximum workpiece weight between faceplates with 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st / 2nd gear) - Overall dimensions: - Total length: 12,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: tailstock, coolant pump, chuck guard, tool post Optional equipment available at additional cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang pembubutan: 5.000 mm, panjang total: 7.500 mm, lebar total: 2.130 mm, tinggi total: 1.550 mm, kecepatan spindel (maks.): 630 rpm, kecepatan spindel (min.): 5 rpm, berat keseluruhan: 12.900 kg, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, poręba tr-135b2/5m universal lathe has been comprehensively rebuilt and modernised by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, complies with the technical acceptance requirements of the WOT and Polish standards, and also meets EU regulations. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: overhaul carried out to order, delivery time 3.5 months from placement of order Technical data: - Distance between centres/turning length: 5,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centres: 9,000 kg - Max. workpiece weight between centres + 1 steady rest: 12,000 kg - Max. workpiece weight between faceplate centres + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st/2nd gear) Hedpfx Asi Apilsa Nsng - Overall dimensions: Total length: 7,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 12,900 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, incl. display, installation, and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang pembubutan: 6.000 mm, panjang total: 8.500 mm, lebar total: 2.130 mm, tinggi total: 1.550 mm, kecepatan spindel (maks.): 630 rpm, kecepatan spindel (min.): 5 rpm, berat keseluruhan: 14.100 kg, berat benda kerja (maks.): 11.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-135B1/6M has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the documentation of a new machine, meets the technical acceptance requirements of WOT and Polish standards, and also complies with EU directives. The machine comes with a full 12-month warranty covering spare parts and electrics. Availability: Overhauled to order, delivery time 3.5 months from order confirmation. Technical specifications: - Centre distance / Turning length: 6000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 8,000 kg - Max. workpiece weight between centers + 1 steady rest: 10,000 kg - Max. workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Hnsdpfefhk Inex Aa Neg Standard equipment: Tailstock, coolant pump, chuck guard, tool post Additional equipment available at extra cost: - 3- or 4-jaw chuck, different diameters and versions - 2-axis Digital Read Out including display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 105 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang pembubutan: 3.000 mm, panjang total: 5.500 mm, lebar total: 1.800 mm, tinggi total: 1.800 mm, berat keseluruhan: 11.400 kg, berat benda kerja (maks.): 11.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-135B/3M has been comprehensively refurbished and modernized by us. It features technical specifications that comply with both the technical and operational documentation of a new machine, meets the technical acceptance requirements of WOT and Polish standards, and is also in accordance with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Remanufactured to order; delivery time: 3.5 months from order placement. Technical data: - Distance between centers / Turning length: 3000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 105 mm - Max. workpiece weight between centers: 8,000 kg - Max. workpiece weight between centers + 1 steady rest: 10,000 kg - Max. workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 Hsdjdy I I Aspfx Aa Nong - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 5500 mm Width: 2130 mm Height: 1550 mm - Total weight: 11,400 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and designs - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang pembubutan: 10.000 mm, panjang total: 12.500 mm, lebar total: 1.800 mm, tinggi total: 1.800 mm, penjepit spindle: MK 6, The PORĘBA TR-135B2/10M universal lathe has been comprehensively rebuilt and modernized by us. It boasts technical specifications that correspond to the technical and operational documentation of a new machine, meets the WOT acceptance criteria and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty covering spare parts and electrical components. Availability: tailor-made general overhaul upon order, delivery time 3.5 months from order confirmation Technical data: - Distance between centers / turning length: 10,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 Hsdjkh Hbhopfx Aa Njng - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 12,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: - 3- or 4-jaw chuck, various diameters and types - Digital readout for 2 axes, including display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost