Beli Mesin amplas pita lebar dengan lebar kerja 1300–1499 mm bekas (122)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Working width 1300 mm Workpiece height – max. 3 – 140 mm Control system Xinje XD5 Part length – min./max. 200 – mm Total connected load 13.4 kW Machine weight approx. 4.5 t Space requirements approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, immediately available, and can be inspected under power at the seller’s location. DESCRIPTION: Iodpfx Ajylp A Dolceat - Minimum part length: 200 mm - The machine is designed for sanding flat individual components such as kitchen cabinets, windows, doors, furniture, etc. - Modular control system for the module units to meet customer requirements. - Frequency converter for speed control of the motors on each module unit. - Each unit can be easily pulled out for maintenance and for changing sanding paper and brushes. - Automatically adjustable working height (3–140 mm) via the control system - Oscillating compressed air at the end section Additional information: - Ball bearings, drive belts, and chains for the brush drives were replaced in June 2025

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Grosime minimă: 3,0 mm Grosime maximă: 160 mm Lățime maximă: 1350 mm Lungime minimă: 250 mm Dimensiune bandă abrazivă: 1400 x 2620 mm Role: 3 + 3 (cauciuc) Sistem de curățare a suprafeței cu perie și aer pe ambele părți Viteză maximă de avans: 20,5 m/min Poate funcționa în 4 moduri diferite: 1. Ambele utilaje – toate cele 3 role acționate pe fiecare utilaj 2. Ambele utilaje – doar ultimele 2 role acționate pe fiecare utilaj 4. Utilaj cu contact superior – toate cele 3 role acționate sau doar ultimele 2 Toleranță: 0,2–0,3 mm pentru un panou cu lățimea de 1250 mm Configurație role: Mașina 1 – șlefuire inferioară: Prima rolă: 18,5 kW, duritate 60 A doua rolă: 15 kW, duritate 40 A treia rolă: 11 kW, duritate 24 Iodew A Ng Espfx Alceat Mașina 2 – șlefuire superioară: Prima rolă: 18,5 kW, duritate 60 A doua rolă: 15 kW, duritate 40 A treia rolă: 11 kW, duritate 24 Utilajul este montat și poate fi testat.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.350 mm, berat keseluruhan: 5.500 kg, tinggi kerja: 880 mm, Wide belt sander with cross and longitudinal unit for sanding, including veneer prior to lacquering. The machine is fully operational, well maintained, and in very good technical condition. The feed belt has been replaced. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. cleaning unit Feed speed: adjustable 4.5–22 m/min Units: cross/longitudinal/brush Brush roller unit: centrally height adjustable Diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 1. Cross sanding unit with wear-free braking device, pneumatic belt tensioning, belt tracking control, pressure lamella belt system, intermittent belt cleaning device Sanding belt size: 4900 x 150 mm Belt speed: 12 + 24 m/s Drive power: 13 / 17 kW Ijdpfxsya I Rio Alcsat 2. Longitudinal sanding unit Infinitely variable, electronic adjustment of belt speed via frequency converter Wear-free braking device, pneumatic belt tensioning Intermittent belt cleaning device Belt control: infrared Sanding belt counter-rotating Sanding belt size: 2620 x 1350 mm Belt speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for machine parameter input, including numeric thickness adjustment and display for fault sources, workpiece pass-through, and feed speed Electronically controlled pressure bar Control roller spacing: 40 mm Pneumatic belt tensioning The pressure surfaces of the pressure bar automatically adapt to the contour of the passing workpieces Weight approx. 5,500 kg Required space approx. 2550 x 2675 x 2400 mm

Kondisi: bekas, Tahun pembuatan: 2005, nomor mesin/kendaraan: A41213AC1, de-to-multilang-001 Iedpfox Ex Tmjx Alcsat

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.350 mm, berat keseluruhan: 2.500 kg, tinggi penggerindaan: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Grooved steel sanding roller 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Grooved steel sanding roller 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) Iodpfeyub R Ejx Alcoat - Sanding roller with 85 Shore hardness TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrical system: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Forward/reverse function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start and sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is not supplied with a power cable. Electrical connection must be provided on site.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.350 mm, SCM wide-belt calibration and fine sanding machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./Max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore—1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore—2nd position - Hard sanding pad with manual working height adjustment - 1st unit motor power: 11 kW (15 HP) - Electronic ammeter for the main motor to display power consumption - Electronic display for working height - Electronically controlled abrasive belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before the first unit - 60 Shore rubber feed belt Iodpfetwqn Sox Alcjat - Roller table with two rollers at the infeed and outfeed of the working table - Feed belt with two speeds: 4.5 / 9 m/min with gear motor - Automatic belt centering Includes the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation/deactivation of roller 1st unit “R” + pneumatic activation/deactivation of roller 2nd unit “CS” + "MESAR" elastic segmented sanding shoe + pneumatic activation/deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50" + electronic working height adjustment 1 pc. CE safety regulations 1 pc. Roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" helical-ribbed steel contact roller 1st unit 1 pc. Main motor 15 kW 1 pc. Abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. Door with inspection window at the rear 1 pc. Logic SC control

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Technische Daten: - Arbeitsbreite 1350 mm - pneumatische Oszillation - Vakuumtisch - Stand-alone-Maschine (Tischhub/Tischsenkung) 1. Kombi-Aggregat: - Motorleistung 18,5 kW - Stahl-Kalibrierwalze - stufenlose Verstellung der Bandgeschwindigkeit - Segmentiertes Druckschuh-Pad (52 Segmente à 26 mm) 2. Kombi-Aggregat: - Segmentiertes Druckschuh-Pad (52 Segmente à 26 mm) - Motorleistung 7,5 kW - stufenlose Verstellung der Bandgeschwindigkeit Iodovdtxiopfx Alceat - Bürste am Austrag des Materials - stufenlose Verstellung der Vorschubgeschwindigkeit - pneumatische Bandreinigung

Kondisi: bekas, Tahun pembuatan: 1998, Used machine Year of manufacture: 1998 1 belt sanding machine with combination unit with electronic segmented pressure bar for sanding soft and hard veneers calibration and fine sanding of solid wood calibration of workpiece carrier boards sanding of defective veneers and lacquers intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers sanding of blocking foils with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm calibration roller can be activated via terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed frequency controlled, approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blow-off: 490 l/min Extraction port: 180 mm Air requirement for sanding unit: 1800 m³/h Iedpfx Ajx Rpgholcsat Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm The machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A11108GM1, Wide-Belt Sander Costa K6 CCC 1350 Year of manufacture: 2001 Technical condition: very good, after a complete overhaul at COSTA in 2023 The Costa K6 CCC 1350 wide-belt sander from 2001 is a robust industrial machine designed for sanding and calibration of wooden surfaces. This machine features a fixed table and a movable working section with rollers. Constant working height: 890 mm, allowing installation in a production line. Isdpfxewczkie Alceat Additionally, the machine is equipped with a vacuum table powered by its own fan. Key technical specifications: - Sanding width: 1350 mm - Number of sanding units: 3 (steel calibration roller, 2x rubber roller) - Cleaning or sanding brush - Sanding belt length: 3250 mm

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear brake unit, automatic belt length adjustment Dust extraction system controlled according to workpiece presence, counter-rotating sanding belt, abrasive belt grain compensation by computer Belt speeds: Iedpfjx Rdn Tjx Alcsat 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. continuously adjustable sanding speed via electronic frequency inverter, double purge opening connection for dust extraction device. Anti-wear brake unit, automatic adjustment of differing belt edge lengths, dust extraction system controlled according to workpiece presence, disconnectable, counter-rotating sanding belt. 2 pressure beams with selectively adjustable pressure system - CSD® system Continuously adjustable pressure of individual pressure elements for single and multiple feed. Spacing: 32 mm. Workpiece tolerance compensation up to 2 mm by maintenance-free pressure magnets. Working width, as well as the start and end of sanding on the pressure beam, are electronically adjustable. The pressure elements are activated by electromagnetic lifters capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology always ensures proportionally equal pressure in relation to pad overlapping on the workpiece. The risk of edge-through sanding is virtually eliminated by this continuous, dynamic control of pressure force.

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, 1. unit roller baja Ø140 mm 2. unit kombinasi – roller karet dan pad segmen elektronik, sistem EPS lebar kerja 1100 mm, tinggi kerja 3–160 mm, ukuran sabuk 1900 x 1120 MM Total daya 30 kW – berat total sekitar 1900 kg Iedpfsym Rl Njx Alceat

Kondisi: bekas, Tahun pembuatan: 2006, 1. Unit kombinasi dengan roller baja dan bantalan tersegmentasi elektronik lebar kerja 1350 mm, motor 15 kW, ukuran belt amplas 2620 x 1350 mm cocok untuk pengamplasan kayu solid, veneer, dan permukaan berlapis cat tersedia mulai Maret 2026 Isdpfx Asym Rdrslcjat

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Wide Belt Sander CB 1300 R+RR Specification: • Condition: used, after comprehensive inspection and calibration • Manufacturer: CB • Model: 2NRKRR13002N • Working width: 1300 mm • 2 sanding units: - First: calibrating drum, hard rubber, diameter 230 mm - Second: 2 drums, hard and soft, each with independent adjustment, diameter 160 mm each • Main motors: 2 x 9.2 kW • Two conveyor feed speeds • Electronic thickness indicator for workpiece • Oscillation with photocell sensors • Table extension rollers • Electric height adjustment (up/down) • Thickness gauge for processed material • Safety sensor preventing insertion of overly thick workpieces • Original paint • Abrasive belt size: 1340 x 2200 mm • Extraction ports: 3 x 180 mm • Weight: approx. 2200 kg • Machine from early 1990s • Overall dimensions: 200 x 220 x 210 cm (L x W x H) Additional Information: • Very good original technical and visual condition Iaodpsw U D Duefx Alcjt • Actual item condition as shown in photos • Possibility to power up and test the machine on site

Kondisi: bekas,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.300 mm, tinggi benda kerja (maks.): 140 mm, model controller: Xinje XD5, berat kosong: 4.500 kg, panjang kerja: 200 mm, en Ijdpfxex Tt Uuo Alcoat

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.320 mm, tinggi penggerindaan: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition: Used, after comprehensive inspection and calibration • Manufacturer: SAC • Model: Project RT 1320 • Working width: 1320 mm • Max working height: 160 mm • 2 sanding units: - First: calibrating roller, hard rubber, diameter 300 mm (brand new, freshly recoated) - Second: pad unit with segmented foot and jump-in/jump-out function • Outlet dust removal brush • Main motors: 10 and 11 kW • Total machine power at full load: 28 kW • Control via touchscreen panel, capable of saving various programs and settings as required • Can operate in manual mode (custom parameters) or automatic mode (pre-saved programs) • Infinitely variable speed adjustment for the second sanding unit • Stepless feed speed adjustment for conveyor • Electronic thickness display for sanded material • Vacuum pump included • Paper cleaning mechanism • Photocell-controlled oscillation • Conveyor in very good condition • Extension rollers for support tables • Thickness gauge for sanded material • Safety sensor preventing oversize material entry • Original paintwork • Abrasive belt size: 2620 x 1320 mm • Extraction ports: 3 x 175 mm + 120 mm (brush) • Weight: 2300 kg • Year of manufacture: 2001 Iaodpjw U Dxfefx Alcot • Dimensions: 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Photos reflect the actual condition of the machine • Possibility to run and inspect the machine on site

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 650 mm, Perlengkapan: Pelat tipe tersedia, Kündig Botop, sanding unit top roller, shoe pneumatic, sanding unit bottom roller, shoe pneumatic. Machine has been completely overhauled: new conveyor belt, new rollers. Iaodpfx Aovmt D Relcot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.200 mm, panjang total: 2.750 mm, lebar kerja: 1.350 mm, lebar penggilingan: 1.350 mm, berat keseluruhan: 3.580 kg, tinggi penggerindaan: 160 mm, jenis arus masuk: tiga fasa, panjang sabuk penggiling: 1.620 mm, lebar benda kerja (maks.): 1.350 mm, Wide Belt Sander VIET Challenge 323B – after technical inspection, ready for operation. Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – VIET • Model – Challenge 323B • Working width – 1,350 mm • Sanding thickness range – 3 to 160 mm • 3 sanding units: - First: calibrating roller, made of hard rubber - Second: rubber roller with lower hardness, with pneumatic contact/release function - Third: soft rubber roller, with pneumatic contact/release function • All rollers with 240 mm diameter • Possibility to work with pneumatic engagement on the 2nd and 3rd roller or in manual mode with a fixed height setting • Main motors: 2 x 11 kW • Machine controlled by a touch panel with memory for various programs and settings as needed • Display with error and machine fault messages • Infinitely variable conveyor speed control – via variator • Electronic thickness indicator for the sanded element • Air-jet cleaning mechanism for sanding belts – on 2nd and 3rd unit • Oscillation at end stops (reliable) Isdpfex Nw Spox Alcoat • Conveyor in very good condition • Extension table rollers • Thickness gauge for sanded material • Safety sensor preventing insertion of overly thick workpieces • Original paintwork • Abrasive belt size – 2,620 x 1,380 mm • Extraction ports – 7 pcs. • Weight – 3,580 kg • Year of manufacture – 2002 • Complete manufacturer documentation in Italian • Overall dimensions: 270 x 225 x 220 cm (length x width x height) Additional information: • Perfect, factory technical and visual condition • Presented photos show the actual condition of the item for sale • Inspection and test run possible on site • The listed auction price does not include VAT or transport costs Financing and transport: • We organize transport using our MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease loans

Kondisi: hampir baru (bekas), Arbeitsbreite 1350 mm Die Maschine befindet sich, wie auf den Bildern zu sehen, in einem ausgezeichneten neuwertigen Zustand. Iedpfx Aouuitgelcoat

Kondisi: hampir baru (bekas), Tahun pembuatan: 1990, WEBER OFZ-2-1350 Wide Belt Sander Working width: 1350 mm Number of units: 2 1: Calibration roller with 18.5 kW motor 2: Shoe-type unit with 11 kW motor Pneumatically-actuated sanding pad Cleaning brush Ijdpfsgm Tqwsx Alcsat Stepless feed speed adjustment Machine weight: 2700 kg

Kondisi: baik (bekas), Lower and upper calibration line for panels, consisting of: First lower machine: roller - roller - pad Second upper machine: roller - roller - pad Variable speed drive, 1300 mm working width Vacuum system for small parts and exit brushes Ijdpfou S Rccox Alcjat

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Wide Belt Sander DMC USK 1350 M3 - Made in Italy - Cross-belt unit (so-called 'sergeant') Iasdpsgr Er Sefx Alcst - Year of manufacture: 2011 - Electric and pneumatic ionizer TECHNICAL PARAMETERS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: - Cross-belt (so-called "sergeant") - Motor power: 12 kW 2nd unit: - Rubber drum - Hardness: 95 Shore - Diameter: 240 mm - Motor power: 18.5 kW 3rd unit: - Rubber drum - Hardness: 55 Shore - Drum diameter: 300 mm - Motor power: 15 kW 4th unit: - Pneumatic pad - Motor power: 15 kW 5th unit – cleaning brush – 2.2 kW 6th unit – air blower - Belt air blowing - Pneumatic oscillation Feed speed: 2.5–18 m/min Pneumatic belt tensioning Electric height adjustment Suction port diameters: - 3 x 200 mm, 8 x 80 mm, - 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Kondisi: bekas, Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.350 mm, tinggi penggerindaan: 150 mm, tinggi kerja: 150 mm, jenis penyesuaian ketinggian: listrik, tinggi benda kerja (maks.): 150 mm, 1. Very good condition 2. Year of manufacture: 1993 3. Electronic PLC control, Heesemann 4. Model/Type: LSM 6 TECHNICAL SPECIFICATIONS: - Working sanding width: 1350 mm - Maximum thickness of sanded elements: 150 mm MACHINE CONFIGURATION: Iodjw H Sk Tspfx Alcoat I – Crosswise aggregate with electronic sequential pressure - Main motor: 13 kW - Pneumatic photo cell oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with sanding pad - Main motor: 13 kW - Sanding belt cleaning system with oscillation - Pneumatic pressure sanding pad - Pneumatic photo cell oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO CELL OSCILLATION - Pneumatic strip system with oscillation for cleaning belts III – Combination unit with sanding pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pressure sanding pad - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for elements after the main aggregate at the outfeed - Motor: 1.1 kW - Extraction outlet: 1 x 140 mm - Feed speed adjustable with gear motor: 4 kW motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic cleaning system for the feed belt - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Machine suitable for lacquer sanding and intermediate lacquer sanding - Overall dimensions (L/W/H): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2007.10.191, lebar penggilingan: 1.350 mm, panjang sabuk penggiling: 4.800 mm, tinggi benda kerja (maks.): 150 mm, lebar sabuk penghalus: 1.400 mm, Automatic Sander + Dust Extraction Machine TECHNICAL DETAILS Sanding Width: 1,350 mm Working Height: 880 mm Workpiece Thickness: 3 – 150 mm Transport Bed: Continuous conveyor belt Transport Bed Drive: 4.0 kW / Frequency Converter 7.5 kW Feed Speed: 3 – 15 m/min Workpiece Vacuum Clamping System Drive: 7.5 kW Units: 3 x cross sanding, 1 x longitudinal sanding, 1 x brush unit Cross and Longitudinal Sanding Units Cross Sanding Unit – Sanding Belt Dimensions: 4,800 x 150 mm Sanding Belt Speed: 2–20 m/s Drive Power per Cross Sanding Unit: 15 kW Pressure Lamella Belt Dimensions (cross sanding): 4,350 x 140 mm Longitudinal Sanding Unit – Sanding Belt Dimensions: 2,620 x 1,400 mm Sanding Belt Speed (longitudinal sanding): 1.8 – 16 m/s Drive Power (longitudinal sanding): 15 kW Pressure Lamella Belt Dimensions (longitudinal sanding): 1,900 x 1,380 mm Brush Unit Brush Roller Diameter: 120 mm Drive Power: 0.75 kW Air Requirements Cross Sanding Units: 91.5 m³/min Longitudinal Sanding Unit: 30.5 m³/min Brushing Device: 18.0 m³/min Transport Belt Blown Air: 13.5 m³/min Workpiece Vacuum Clamping System Exhaust: 40.0 m³/min Total Air Requirement: 193.5 m³/min Total Compressed Air Consumption: 115 m³/h MACHINE DETAILS Total Power Connection: approx. 80 kW Operating Voltage: 400 V Frequency: 50 Hz Main Machine Dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Machine EA 8 – Machine No.: 2007.10.192 Sanding Width: 1,350 mm Working Height: 880 – 920 mm Workpiece Thickness: 3–150 mm Required Air Speed: 20 m/s Air Requirement: 30.5 m³/min Transport Bed Drive: 1.1 kW / Frequency Converter 2.2 kW / 0.75 kW Feed Speed: 3–15 m/min Fan Drive: 5.5 kW Height Adjustment Drive: 0.18 kW Power Connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction machine EA 8 - Workpiece vacuum clamping system - Multiple cross and longitudinal sanding units - Brush unit Iaedpfxoyg Exqe Alcot

Kondisi: baru, Tahun pembuatan: 2024, en Iaodpfx Aleuhiq Docot