Beli Mesin transfer bekas (44)

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Machine dimensions: LxWxH: 2400x2800x2800 mm Control cabinet dimensions No. 1: LxWxH: 1000x850x2350 mm Control cabinet dimensions No. 2: LxWxH: 1250x650x2230 mm Control cabinet dimensions No. 3: LxWxH: 650x600x2300 mm Control cabinet dimensions No. 4: LxWxH: 1300x650x2350 mm TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles E.g. for series production of fittings in large quantities Further technical specifications of the machine: - Workpiece carrier: Workpiece holding drum Ø 800mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm - Left: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm, as well as 3x radial drilling and milling spindles, including 1x U-axis and 1x thread-cutting spindle - 1st thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power packs - Chip conveyor - Band filter by Filtertechnik Gera (nonwoven band 430mm) - Operator panel Bsdju Idxropfx Adcodi - Hand-held pushbutton controller i.D.

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000x850x2350 mm No. 2: LxWxH: 1250x650x2230 mm No. 3: LxWxH: 650x600x1700 mm No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT with 3 working stations equipped with 15 drilling and milling spindles For example: production of industrial fittings in larger quantities (see photo). Further technical details regarding the machine: - Workpiece carrier: workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holding fixture; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. spindle speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - Left side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - 1st thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 125 mm; spindle speed 35.5 - 900 rpm; reversible (right/left) - 2nd thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 80 mm; spindle speed 45 - 560 rpm; reversible (right/left) Equipment: - 2 hydraulic power units Bdjdsu Idxfepfx Adcei - Chip conveyor system - Band filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Hand-held control unit This machine is not connected. Sale as is! Subject to prior sale.

Kondisi: bekas, en-GB_TD0011 Bsdpfsu Idw Isx Adcodi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Stations: 6; Power: 40 kW; Control system: Siemens. Includes upstream Fischer separating head, Festo feed unit, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip processing with discharge and hydraulic power unit. Documentation available. On-site inspection possible. Bedpfsu T Rhbex Adcodi

Kondisi: siap digunakan (bekas), Two identical Eubama rotary indexing machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, indexing rate: 20 cycles/min, spindle stroke: 100 mm, drilling capacity (steel/brass): 20 mm/30 mm, thread cutting capacity (steel/brass): M30/M40. Documentation is available. An on-site inspection is possible. Bedpfx Asw Hglmedcedi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, A rotary transfer machine for the production of ball sockets is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000 mm, machine power: 40 kW, control system: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing unit, and separate Knoll chip disposal. In 2015, the machine was upgraded for SW milling. Documentation available. On-site inspection is possible. Bodpfxju T Rg Re Adcodi

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: - No. 1 (LxWxH): 1000 x 850 x 2300 mm - No. 2 (LxWxH): 1250 x 850 x 2500 mm - No. 3 (LxWxH): 1000 x 850 x 2100 mm - No. 4 (LxWxH): 1000 x 500 x 2350 mm Required floor space (approx.) (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT featuring 3 working stations with 15 drilling and milling spindles For example, for the production of fittings in larger quantities Further technical data of the machine: - Workpiece carrier: Workpiece drum Ø 800mm for 8 workpiece clamping stations, indexing time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. spindle speed 2240 rpm - Left: 3x drilling and milling spindles and drilling spindles, and 2x thread cutting spindles - Right: 2x drilling and milling spindles and 2x thread cutting spindles, and 1x U-axis, as well as radial 2x adjustable thread cutting spindles, 2x drilling and milling spindles (one adjustable), and 1x adjustable U-axis Bdjdpfxsu Idv De Adcoi - 1st thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter from Filtertechnik Gera (fleece belt 430mm) - Control panel - Manual pushbutton Subject to prior sale.

Kondisi: bekas, en001 Bodpfx Asu Idvwjdcsdi

Tahun pembuatan: 1988, Kondisi: bekas, Eubama S5 Rundtaktmaschine Bodpfedg Da Ijx Adcedi Seriennummer 5531 Baujahr 1988 Sehr guter Zustand Seit 15 Jahren unbenutzt

Kondisi: bekas, Technical details: Spindle taper: SK40 Spindle stroke: 175 mm Number of spindles: 8 units Number of stations: 5 units Cycle time: 15-20 sec Speed: drilling 225...1037 rpm Speed: threading 50...316 rpm Feed rate: 0.2 m/min Total power requirement: 30 (40 HP) kW Machine weight approx.: 9.0 t Space requirement approx.: 3.9x2.4x2.5 m Machine dimensions: L:3.9xW:2.2xH:2.7 m Dimensions L x W x H: + plant 2.7x2.52x2.25 m Transfer machine The machine can be offered fully overhauled. (Photos show original condition)! The machine is designed for metal-cutting machining of workpieces in a single clamping operation. It is especially suitable for turning blanks made of brass with a diameter of 90 mm x approx. 100 mm length. Description: - Workpiece carrier with indexing disc and clamping stations, rotary table type with horizontal axis, featuring 5 workpiece stations. Bsdpfx Adju Idycecjdi Machining units: - Drilling spindles and tapping units - Drilling capacity up to 2 3/4" and 81.53 mm in brass - Thread cutting up to 2 1/2" and metric threads The machine is equipped with automatic workpiece feeding and unloading units (feeding rate 3-4 pieces/min and cycle time 15-20 sec). Also includes coolant system. i.D.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de-001 Bedpfx Asyg Nwdjdcsdi

Kondisi: baru, Tahun pembuatan: 2024, lebar kerja: 1.500 mm, ketebalan pelat baja (maks.): 20 mm, Gunting plat hidrolik – Mesin pesanan khusus (waktu pengiriman sekitar 10-14 minggu) – termasuk pedal kaki, layar sentuh, area belakang dengan pengawasan fotocell, celah potong otomatis/elektrik, sudut potong otomatis/elektrik, penjepit hidrolik, bumper belakang bermotor hingga kedalaman 1000 mm Bdsdpfxjynatls Adcsi - Gambar serupa -

Kondisi: bekas, en-230624-01 Bdodpfxeu Idwbe Adcoi

Kondisi: siap digunakan (bekas), Length: 8,225 mm, width: 3,200 mm, complete with documentation. Bjdpfx Asi Ew Dpsdcedi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HB32-287, RINCIAN TEKNIS Stasiun 1: Pemotongan Stasiun 2: Pengeboran Stasiun 3V: Bor Stasiun 3H: Pengeboran Stasiun 4: CNC Stasiun 5: CNC Stasiun 6V: Ulir Stasiun 6H: Pengeboran Stasiun 7: Membalik Stasiun 8: CNC Bubut Stasiun 9: CNC Ulir Stasiun 10: Bor Stasiun 11: Pengeboran Stasiun 12: Tanpa Unit Stasiun 13: CNC Bedpfxox U Tgas Adcodi Stasiun 14: Milling 45° Stasiun 15: Pengeboran 45° Stasiun 16: Pengeboran 45° RINCIAN MESIN Kondisi: Terbongkar Tanggal Disimpan: Sejak Agustus 2024 Daya Terpasang: 400 V, 40 kW PERLENGKAPAN - Majalah pemuatan - Knoll conveyor serpihan - Knoll filter rotasi vakum VRF 500 - Mesin dijual tanpa dudukan hitam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61062, saluran batang: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar feeder Model: IEMCA PRA52 F33 Year of manufacture: 2004 Max. bar length: 3300 mm Max. bar diameter: 9.1 mm Control model: Siemens S7-200 Drive for part-off unit Stroke per slide: 7.15 mm Operating angle: 26.565° Face turning chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring system with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year of manufacture 2004) Oil filtration system (Knoll FKA 150) Scraper belt conveyor with coolant system High-pressure system FKA / 250 Tubing with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure amplifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air maintenance unit DA 300 Clamping plate for jaw chuck TK420 Bjdpfx Adoyx Ia Nocsdi Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear drive Clamping flange (diameter: 100 mm) Complete spindle unit with timing belt drive Coolant supply Cover plates for vacant stations Material stop (60 mm stroke) Part-off unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC axis Device for flushing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details on the machine can be found in the attached documents.

Kondisi: baru, Tahun pembuatan: 2025, lebar kerja: 3.000 mm, ketebalan lembaran (maks.): 10 mm, Gunting plat hidrolik - mesin pesanan (waktu pengiriman sekitar 10-14 minggu) - termasuk pedal kaki, layar sentuh, ruang belakang dengan pemantauan sensor cahaya, celah potong otomatis/listrik, sudut potong otomatis/listrik, penahan hidrolik, pembatas belakang bermotor hingga kedalaman 1000 mm Bdsdpfx Asym Uv Esdcsi -Gambar bersifat ilustrasi-

Kondisi: bekas, Tahun pembuatan: 2001, Stations 10 / 22 Tool holder SK 40 Control system SIEMENS SIMATIC OP 3 Total connected load approx. 112 kW Bdjdpfx Adotqqlqocsi = Transfer machine Drum-type indexing table with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Thread Cutting: 8 units; Drilling & Countersinking: 5 units; Drilling, Countersinking & Thread Cutting: 2 units), Tool holder each SK 40, Motor power of individual units between 4.0 and 4.5 kW, SIEMENS control system SIMATIC OP 3, Handling robot ABB Accessories: Power chuck (without jaws), chip conveyor, coolant system

Kondisi: bekas, Tahun pembuatan: 1997, Transfer machine Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total connected load: approx. 130 kW Cam drum with 10 workpiece stations, 22 machining units (Drilling: 10 units, Drilling & Tapping: 5 units, Drilling & Counterboring: 3 units, Drilling, Counterboring & Tapping: 1 unit, Tapping: 3 units), Each with SK 40 tool holder, individual unit motor power between 4.5 and 5.5 kW, Bodpfxetqqlrj Adcodi SIEMENS control system SIMATIC OP 3, equipped with ABB loading robot Accessories: - Power chuck (without jaws) - Chip conveyor - Coolant system