Beli Rak berat bekas (209)

Kondisi: baik (bekas), Tahun pembuatan: 2019, 5.60-metre Jungheinrich pallet racking with 2 levels Jungheinrich pallet racking with a total length of 5600 mm, consisting of a starter and an extension bay (each 2700 mm). Each bay has two storage levels (including floor storage level) with two beams (2700 mm). Each bay can store 3 Euro pallets side by side and 6 pallets (including floor level) stacked on top of each other. Iodpfx Adowya Hkoqstn One bay accommodates 6 Euro pallets. Manufacturer: Jungheinrich Type: MPB Total length: 5600 mm Rack height: 3000 mm Rack depth: 1100 mm Clear bay width: 2700 mm Number of storage levels: 2 (including floor storage level) Number of bays: 2 Max. compartment load: 3000 kg Max. bay load: 7100 kg Pallet spaces: 12 Scope of delivery: 03 x Jungheinrich pallet rack uprights blue 3000 x 1100 mm 04 x Jungheinrich pallet rack beams yellow 2700 x 140 x 50 mm 08 x safety pins You will find further items – new and used – in our shop! International shipping costs on request!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 7 rack uprights, height 4,230 mm, with base section, usable depth 1,200 mm - 21 cantilever arms with 1,200 mm usable depth, with deflector - 7 roof supports with 1,500 mm projection, pre-drilled for customer-supplied roof construction (*Excluding timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,900 mm upright spacing - Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Bulk offer available: approx. 50 uprights in stock) Itsdpfx Ademhhy Njqon Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Max. snow load 1.85 kN/m² and wind load zone 2) - Load capacity per arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with deflector = 4 storage levels on top of each other - Including longitudinal and diagonal bracing with 1,900 mm center distance - Rack length: 11,500 mm - Including fastening material (without ground anchors) - Supplied with assembly instructions and load labels C4 in accordance with DIN standard - Expert consultation by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with scheduled delivery notification. The material is packed in a manner that enables easy unloading. The foundation must be concrete, level, and suitable for anchor fixing, and must be able to bear the applied loads. The condition and load-bearing capacity of the ground and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the rack uprights protrude at least 500 mm above the top storage level.

Kondisi: bekas, Dimensions 1000 x 1100 mm Itodpfxsvpr Tis Adqen Ideal as flooring for heavy-duty shelving Pressed grating, galvanized according to DIN EN ISO 1461 Load bar: 30x2 mm Cross bar: 9x1.6 mm Mesh: 31x31 mm Edge bar: 30x3 mm

Kondisi: baik (bekas), Tahun pembuatan: 2018, Jungheinrich pallet racking MPB 4500 x 1200 mm, 5 frames, 16 beams 2700 mm with wire mesh decking Ijdpfxovlplns Adqotn

Kondisi: baik (bekas), ca. 250x post racks / storage racks / stackable racks, approx. 1.98 x 1.40 x 2.45m - used - : Price per unit ex location: only €155 (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Load capacity: unknown Internal dimensions: 180 x 139 x 225 Itjdpfx Aju Himrsdqjn External dimensions: 198 x 140 x 245 Own weight: approx. 150 kg Load capacity: approx. 500 kg (information not guaranteed) Stack load: approx. 1000 kg (information not guaranteed) Stackability: 3-high Base material: plastic Each unit consists of: - 2 removable side panels - 3-piece plastic base - base profile - reinforcement strut (3x red bars) Condition: good Available: immediately Location: 72379 Hechingen

Kondisi: hampir baru (bekas), 600 running metres of STOW pallet racking, as new 🧰 Product features • Colour: Frames galvanised / Beams yellow • Load capacity: o Bay load: 12,000 kg o Shelf load: 2,400 kg per level (evenly distributed load) Iodpfxjwnf Hrj Adqjtn + 216 pcs. frames, approx. 5,500 mm high, 1,100 mm deep + 1,290 pcs. beams, 2,700 mm length, 2,400 kg load capacity (evenly distributed load) + 2,580 pcs. locking pins + 864 pcs. concrete anchors M12 x 110 mm for installation 💰 Price / €48,100 net excl. VAT Matching wire mesh decks available on request • Other heights and quantities available upon request • Bulk discounts: on request • Shipping cost: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible anytime by appointment More than 5,000 running metres of pallet racking from various manufacturers always in stock (Technical data, specifications and prices subject to change and errors excepted, intermediate sale reserved! See our T&Cs, all prices excl. VAT ex warehouse.)

Kondisi: baik (bekas), Tahun pembuatan: 2019, 11-meter Jungheinrich pallet racking with 2 levels Iodpfxjwyaz Ie Adqetn Jungheinrich pallet rack with a total length of 11,000 mm, consisting of one starter bay and three extension bays (each 2,700 mm long). Each bay has two storage levels (including floor level) with two beams (2,700 mm). Each bay can accommodate 3 Euro pallets side by side and 6 pallets (including floor level) stacked vertically. One bay offers space for 6 Euro pallets. Manufacturer: Jungheinrich Type: MPB Total length: approx. 11,000 mm Rack height: 3,000 mm Rack depth: 1,100 mm Clear bay width: 2,700 mm Number of storage levels: 2 (including floor level) Number of bays: 4 Max. compartment load: 3,000 kg Max. bay load: 7,100 kg Pallet spaces: 24 Scope of delivery: 05 x Jungheinrich pallet rack uprights blue 3,000 x 1,100 mm 08 x Jungheinrich pallet rack beams yellow 2,700 x 140 x 50 mm 16 x locking pins Further items – new and used – can be found in our shop! International shipping costs on request!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. Itodpfxomhh Dts Adqjn The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: baru, High-quality mesh decks with high load capacities – cost-effective alternative to grid grating – New Prices on request! Manufacturer: Delta Shelving Model: Manta Mesh Standard width: 885 mm (for a 2.70 m beam you will need 3 decks = 2,655 mm) 1335 mm Frame depths: 1.05 m 1.10 m 1.20 m Other depths available upon request! Uniformly distributed load: between 250 and 1,500 kg Standard (price applies to the standard version): 1,000 kg, i.e. per pallet Mesh size: 50 x 100 or 25 x 100 mm Please state your beam type (traverse type) when making an inquiry! Whether box profile (or IPE beams) 50 or 40 mm, or stepped beam. Advantages: - No sharp edges - 200% safety factor – independent of rack beams - Suitable for permissible deflection and structural failure - Wide range of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. MantaMESH provides peace of mind with more than 70% open area and a 200% safety factor, surpassing the requirements of ANSI MH26.2 - 2007, NFPA 13, and the FM Global Approval Standard for ESFR sprinklers. - Compatible with ANSI MH 26.2 - 2007 - Made in Germany - Pre-welded hemmed support channels - Pre-galvanized finish - Maximum deflection independent of the rack beams: 1,100 mm deep: 6.67 mm at 1,000 kg load - Load at structural failure, independent of support beams: Iodpfjiuvxbex Adqstn 1,100 mm deep: 2,000 kg - Mesh has more than 70% open area Sample configuration – we are happy to design a solution for your application! Depth: 1,102 mm Width: 881 mm 4 pre-welded support channels Mesh size: 50 x 100 mm 1,000 kg UDL independent of support beams Front: 30 mm folds outward Rear: 30 mm folds downward on the outside Item weight: 9.43 kg

Kondisi: hampir baru (bekas), 400 running meters of STOW pallet racking, as new condition 🧰 Product features • Color: uprights galvanized / beams yellow • Load capacity: o Bay load: 12,000 kg o Shelf load: 2,400 kg per level (uniformly distributed load) + 145 uprights, approx. height 11,000 mm, depth 1,100 mm + 1,440 beams, length 2,700 mm, 2,400 kg load capacity (with evenly distributed load) + 2,880 locking pins + 2,160 wire mesh shelves, 875 x 1,115 mm, mesh size 50 x 112 mm, load capacity 500 kg per mesh + 580 concrete anchors M12 x 110 mm for fixation 💰 Price / €79,900 plus VAT (net) • Other heights and quantities available on request • Volume discounts: on request • Shipping: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible anytime by appointment We constantly stock over 5,000 m pallet racks from various manufacturers (Technical data, specifications and prices subject to alteration and errors. Sale subject to prior sale! Please see our terms and conditions. All prices ex works excluding VAT.) Ijdpfx Aswnf E Ujdqjtn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Iodpjfdkb Tsfx Adqjtn - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Moving pallet racking system for Euro pallets, etc., SSI Schäfer, 1,000kg per pallet, 2,552 Euro pallet positions – used –: Price ex location: €79,500 (net), plus dismantling, etc.! Manufacturer: SSI Schäfer Type: PR600 / Mobile longitudinal beam racking A6/A7 Year of manufacture: 2012 Manufacturer: SSI Schäfer Type: Mobile racking system PR 600 2 wall-mounted racks 4 mobile carriages with double racks Carriage length: 39,432 mm Carriage width: 2,700 mm Pallet positions: 2,552 Euro pallets Mobile rack specifications: Rack height (top shelf): 7,094 mm Frame height (inside): 7,100 mm Frame height (outside): 7,600 mm Rack depth: 1,050 mm Number of storage levels: 7 Bottom shelf height: 2,444 mm Upright profile: P 15 Compartment load capacities: Level 1: Clear span: 2,700 mm, IPE 100 profile, compartment load 3,000 kg Levels 2-7: Clear span: 2,700 mm, CE 110 profile, compartment load 3,000 kg Max. pallet weight: 1,000 kg Max. usable bay load: 21,000 kg Number of carriages: 4 Max. carriage load: 540,000 kg 3x400 / 240 V AC, 28A Motor output per carriage: 4 x 0.75kW = 3kW Control voltage: 24V Fixed racking: Type: PR600 / Longitudinal beam rack A1 Year of manufacture: 2012 Rack height (top shelf): 7,042 mm Rack depth: 1,050 mm Number of storage levels: 3 Bottom shelf height: 2,942 mm Upright profile: P 15 Compartment load capacities: Clear span: 2,700 mm, CE 110 profile, compartment load 3,000 kg Clear span: 3,600 mm, CE 160 profile, compartment load 4,000 kg Max. pallet weight: 1,000 kg Itjdpfxovnzgce Adqen Max. usable bay load: 9,000 / 12,000 kg Condition: good – very good Available: from the end of March 2025 Location: 78713 Schramberg-Waldmössingen

Kondisi: hampir baru (bekas), 7500 shelf inserts for Schäfer EF 6420 box Used goods, very good condition, see pictures Itjdpfx Aor Ey Dyedqjn Length: 52.5 cm Width: 35.5 cm Height: 2.5 cm Negotiable price: €0.50 net ex stock for orders of 100 units or more Larger quantities available on request! Goods are in stock. Transport and installation available upon request. Viewing possible at any time by appointment. Further information available upon request. Constant stock of over 5,000 linear meters of pallet racks from various manufacturers. (Specifications, details, and prices subject to change and errors excepted. Subject to prior sale! Please see our terms and conditions. All prices excl. VAT ex works.)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. Isdpfx Adjmhh Dhjqjtn According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: baik (bekas), 10,000 pieces of galvanized wire mesh inserts / grating panels for pallet racks Wire mesh inserts available in various sizes, mesh widths, load bars, and load capacities: Negotiable price: from €15,-- net per m² ex stock. Larger quantities available upon request! Product details: | Insert Size (cm) | Mesh Size (cm) | Load Bar (mm) | Load Bar Direction | |-----|-----|-----|----- | | 100.5 x 98.5 | 7 x 3.5 | 35 x 2.5 | 100.5 | | 120 x 89.5 | 7 x 3.5 | 30 x 2.5 | 120 | | 118 x 109 | 7 x 4.5 | 45 x 2.5 | 118 | Iodpfod Hvvbjx Adqetn | 133 x 99 | 3 x 3 | 30 x 2 | 99.5 | | 134 x 75 | 7 x 7 | 25 x 3 | 75 | | 134 x 76.5 | 2.5 x 2.5 | 20 x 2 | 75 | | 134 x 92 | 6.5 x 6.5 | 30 x 2 | 92 | | 134.5 x 99.5 | 7 x 7 | 30 x 2 | 99.5 | | 143.5 x 124 | 7 x 4.5 | 35 x 2 | 124 | Used goods, in excellent condition – see pictures. Goods in stock. Transport available on request. Inspection possible at any time by prior arrangement. Further information upon request. We always have over 5,000 linear meters of pallet racks from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices. Intermediate sale reserved! See our terms and conditions. All prices ex-works plus VAT.) Purchase / Sales We are constantly looking for and offering numerous items from various sectors: - broom-clean factory clearances - business liquidations - fast, flexible, efficient! We also clear out or dispose on behalf of insolvency administrators. Send us a few key details and we will contact you immediately. To visit our website, please click on our logo!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Itsdpfx Aeguk Dksdqon - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: sangat baik (bekas), 78 running metres of Stow pallet racking New and used goods in good condition Height: 6.5 m Iedpfx Aed Tw Hpjdqotn Depth: 110 cm Beam length: 4 m Load per level: 3,000 kg Frames blue, new Beams orange, used Negotiable price: €6,540 net ex stock Offer includes: + 20 frames, pre-assembled, depth 110 cm, height 6.5 m + 152 beams, length 4 m, load capacity 3,000 kg per level + 304 beam locking clips + 40 concrete anchors + Load capacity signs Stock available. Transport and installation available on request. Inspection possible at any time by appointment. Further information on request. Always over 5,000 running metres of pallet racking from various manufacturers in stock. (Subject to alterations and errors in technical data, specifications, and prices, as well as prior sale! See our Terms and Conditions. All prices excluding VAT, ex stock.) Purchase / Sale We are constantly searching for and offering numerous items from various sectors: broom-swept business clearances company liquidations Fast – flexible – efficient! We also clear and/or dispose of for insolvency administrators. Write to us with a few details and we will get back to you promptly. To visit our page, please click on our logo!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. Itsdjmhh Anepfx Adqon According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: sangat baik (bekas), 90 running meters pallet racking Stow Used equipment, very good condition, see pictures Height: 6 m Depth: 100 cm Beam length: 2.70 m Load capacity/shelf: 3,000 kg Itodpsiwkn Refx Adqsn Frames in blue Beams in orange Asking price: €8,650.-- net ex stock Offer includes: + 33 pcs. pre-assembled frames, 12t bay load, depth 100 cm, height 6 m + 192 pcs. beams, length 2.7 m, 3,000 kg load capacity/shelf + 384 pcs. safety clips + 132 pcs. concrete anchors + Load capacity sign Goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Constant stock of over 5,000 running meters of pallet racking from numerous manufacturers. (Technical data, specifications, and prices are subject to change and errors, as well as prior sale! Please refer to our terms and conditions. All prices are ex VAT, ex stock.) Buying / Selling: We are continuously looking for and offering a wide range of articles from various sectors broom-clean business clearances business liquidations fast - flexible - efficient! We also clear out and/or dispose of goods for insolvency administrators. Contact us with a few keywords and we will get back to you promptly. Click on our logo to visit our website!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: Itsdeguk Dvepfx Adqen - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: sangat baik (bekas), 40 running meters pallet racking Stow Used, very good condition, see pictures Height: 4 m Depth: 100 cm Beam length: 2.70 m Load capacity per level: 3,000 kg Frames: blue Beams: orange Negotiable price: €2,570,-- net ex stock Offer includes: Itodpsiwlpfjfx Adqen + 14 pcs. pre-assembled frames, 12t field load, depth 100 cm, height 4 m + 52 pcs. beams, length 2.7 m, 3,000 kg load capacity/level + 108 pcs. beam locks + 56 pcs. concrete anchors + Load capacity label The goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 running meters of pallet racking from various manufacturers in stock. (Subject to change and error in technical data, specifications and prices as well as prior sale! Please see our Terms and Conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from various sectors - broom-clean clearance of business premises - business liquidations - fast - flexible - efficient! We also clear and/or dispose for insolvency administrators. Send us a few keywords and we will contact you immediately. To visit our website, please click on our logo!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) Isdpsmhh Dzsfx Adqotn - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), 70 running meters SSI Schäfer Palflex pallet racking incl. wire mesh shelves Used goods, good condition, see photos Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Itedpfx Ajkx E I Njdqon Galvanized frames Red beams Wire mesh shelves included! 2 pieces of mesh per 2.7 m beam length Negotiable price: € 6,950,-- net ex stock Offer consists of: + 26 pre-assembled frames, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg per bay with evenly distributed load + 200 safety locking pins + 100 galvanized mesh shelves for 50 bays each 2.7 m beam length + 104 concrete anchors + Load capacity signs Goods in stock. Transport and installation available on request. Inspection possible anytime by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, specifications and prices subject to change and prior sale. See our GTC. All prices excl. VAT ex stock) Purchase / Sales: We are always looking for and offering numerous items from different sectors - broom-clean company clearances - business liquidations - Fast, flexible, efficient! - We also clear and/or dispose of assets for insolvency administrators. Contact us with a few keywords and we will reply promptly. To visit our website, please click on our logo!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Iedpsguk A Hofx Adqotn

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Itjdpfxemhhype Adqon