Beli pengujian material bekas (472)

Kondisi: siap digunakan (bekas), Tersedia Moving-Die-Rheometer Alpha untuk analisis reologi dan vulkanisasi campuran karet. Standar uji: ASTM D5289/ISO6502, suhu maks.: 200°C, frekuensi: 1667Hz, regangan: 0,2°/0,5°, tekanan uji: 8000kPa. Dimensi mesin X/Y/Z: sekitar 800mm/700mm/1350mm, berat: sekitar 200kg. Tanpa perangkat lunak. Dokumentasi tersedia. Pemeriksaan di lokasi dimungkinkan. Hjdoxruklspfx Ag Roni

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), A like-new Anritsu X-ray inspection system is available. X-ray output: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed for 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed for 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: under 50h. The machine shows no wear on the conveyor belt or the radiation protection curtains. Documentation available. Inspection on site possible. Hnsdpevzr Ausfx Ag Rsi

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), 1 Hnedpfx Agsxvdfme Roi

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), A Niehues hydraulic test stand is available. 1) TP pump, motor power: 315 kW, flow rate: 13.94–41.83 l/min, max. operating pressure: 25 bar, rated delivery head: 28 m. 2) NKG pump, motor power: 315 kW, flow rate: 5.61–16.83 l/min, max. operating pressure: 16 bar, rated delivery head: 80.7 m. 3) Tank, volume: 11,400 l, permissible pressure: 0.5–10 bar, min./max. operating pressure: 1–5.5 bar, medium: drinking water without additives, min./max. temperature: -10°C–50°C, permissible load cycles: 1000. Hjdpfot Daq Usx Ag Rjni

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), f1915a99-41d6-4332-9877-8ceea1afaf22 Hnodpfxsya Hx So Ag Roi

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A complete Anritsu X-ray inspection system for packaged products is available. 1) X-ray Unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal Separator KDS450ABW: Working width: 450mm, working height: 95mm. 3) Metal Separator KW466CW: Max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. capacity: 80 products/min. Hsdpfxot Dpn Ae Ag Reni 4) Material feed via vibrating trough Jöst FDL 350/60x500. Documentation available.

Kondisi: siap digunakan (bekas), Zwei Trocken- und Wärmeschränke Binder für Laborzwecke stehen zur Verfügung. 1) Binder ED 400, Nutzvolumen: 400l, Innendimensionen X/Y/Z: 1000mm/800mm/520mm, Ebenen: 2, max. Ebenenbelastung: 35kg, max. Gesamtbelastung: 90kg, empfohlene Wandabstände hinten/seitlich: 160mm/100mm, max. Temperaturabweichung: +/-3K, max. Temperatur: 300°C, Leistung: 3,4kW, Maschinendimensionen X/Y/Z: ca. 1250mm/1050mm/800mm, Gewicht: ca. 125kg. 2) Binder KBF 115, Nutzvolumen: 100l, max. Temperatur: 100°C, Leistung: 1,7kW. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Hodpfx Agsxhntlj Rjni

Kondisi: siap digunakan (bekas), Tersedia viskometer Alpha untuk analisis elastomer mentah dan campuran karet. Standar pengujian: ASTM D1646/D3346, suhu maksimum: 200°C, kecepatan rotasi: 2 rpm. Dimensi mesin (P/L/T): sekitar 800mm/700mm/1350mm, berat: sekitar 200kg. Tanpa perangkat lunak. Dokumentasi tersedia. Kunjungan di lokasi dimungkinkan. Hedpfx Aoxrukrsg Roni

Kondisi: siap digunakan (bekas), de-to-hu-it-lt-lv-nb-nl-pl Hedpfx Agoxrukxe Rsni

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), r-001 Hodpfx Agsxnp Scj Rsni

Kondisi: bekas, en-001 Hnodpfx Agoybcfks Rji

Kondisi: sangat baik (bekas), CTS Model: CSR-60/810/S Air-cooled Temperature and Climate Conditioning Unit CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system manufactured by CTS GmbH, comprising a conditioning unit (type CSR-60/810/S) and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications—for example, automotive, electronics, component, or material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system by CTS GmbH, consisting of: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance/lifetime testing). Technical Data (per nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System: Refrigerant: - Pre-cooling stage: R452A (17.0 kg) - Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 | Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (WxDxH): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (WxDxH): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information: Hsdpjya Ev Nefx Ag Roni The following work is performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change. Errors excepted.) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Primus Engineering Type: DST 350 This test system is designed for conducting IP protection class tests "Dust" according to standards such as DIN 40050 Part 9 and DIN EN 60529. The test system is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI - Control panel with display and buttons - Manual regulators - Pre-programmed test cycles - Integrated vacuum circuit with flow measurement Technical data: - Total electrical power: Max. 5 kW - Connection voltage: 400V/50Hz 3-N/PE (16A EEC socket) - Dimensions: width approx. 920 mm, depth approx. 710 mm, height approx. 1770 mm - Test chamber dimensions: width approx. 700 mm, depth approx. 650 mm, height approx. 770 mm - Chamber volume: approx. 350 l - Weight: approx. 200 kg - Vacuum: 0 to -100 mbar - Suction air flow: 0 up to approx. 5 l/min - Operating climate: Temperature: +12 °C to +30 °C, Humidity: 25% rel. to 75% rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: - Dust-protected IP5X and IP5KX - Dust-tight IP6X and IP6KX - with and without vacuum Condition: used Scope of delivery: (see image) Hodjrt U Nuspfx Ag Rsni (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Tahun pembuatan: 2018, Kondisi: baik (bekas), Prüfstand zur Sicherstellung der Qualitäts- und Produktionsanforderungen in einem Serienprozess für ein Getriebe-Montagewerk. Die Anlage umfasst einen Universalroboter, ein Kamerasystem sowie eine eigene Steuereinheit. Die Ausrüstung kann neu angelernt werden, um die kundenspezifisch geforderten Arbeitsschritte abzubilden. Hnsdpfx Aeh D Ezgjg Roi

Tahun pembuatan: 2010, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C1210000251, en-GB Hsdpfx Asyg Iqvog Roni

Tahun pembuatan: 1985, Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, Schenk-Trebel Universal Testing Machine Type RME 250 kN Hnsdpfoyhb Rlox Ag Rsi • Load frame and drive system by Schenk Trebel, year of manufacture 1985, total height approx. 3.3 m. Crosshead travel approx. 2 m • Modernization around late 2003: equipped with 'testControl' control electronics from ZwickRoell • Upgrade in 2010: MultiXtens universal extensometer system by ZwickRoell, with swivel mechanism and two pairs of measuring probes (photo), plus a new testControl module • Info: The testControl module operates in conjunction with the current 'testXpert III' software from ZwickRoell (a license for testXpert III version 1.51 is included in the price) • Temperature chamber (photo), retractable into the machine's test area, built in 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; can be cooled with liquid nitrogen down to approx. –40°C • Load cells: 250 kN and 50 kN (currently installed, see machine photo); also included: 5 kN, 1 kN, and 500 N (photo) • 2 wedge specimen grips (photo) Condition of the machine The machine has been in use for testing until early 2026. In operation were the 50 kN load cell and the crosshead travel encoder (both sensors: last calibration 06.05.2024, including standard inspection). A defect in the servo amplifier for the drive (component in the testControl module) has, since around autumn 2025, caused frequent disconnections between the software and the drive, resulting in drive shutdown until hardware and software are restarted. The servo amplifier or the complete testControl module must be replaced (cost information available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since. The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units visible in the photos mounted in the machine will be removed and remain with the seller.

Kondisi: bekas, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80 °C – 400 V – 5 kW For sale is an industrial drying oven / heat drying oven manufactured by Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory settings. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel trays. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80 °C Temperature control: digital Safety thermostat included CE marking present Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (see image) (Misprints and errors in technical data are subject to change!) For further inquiries, we are happy to assist you by phone. Hsdpfx Agsx Uz Rts Rjni

Kondisi: sangat baik (bekas), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell material testing machine designed for professional tensile and compression testing of materials and components. This machine is suitable for metals, plastics, rubber, and many other materials, and is typically used in laboratories, quality assurance, research, and education. Control is via PC with Zwick/Roell testXpert III software (media & documentation included). Technical data: Nominal test force: 20 kN Test direction: tension & compression Mains supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Hnedjx Up Igspfx Ag Roi Technical data (from documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Test direction: tension & compression Max. test frequency: 0.5 Hz Traverse: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Total height: approx. 1,545 – 2,114 mm (depending on traverse position) Total width: approx. 856 mm Total depth: approx. 650 mm Test area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical equipment Electrical Data Mains supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug type: Schuko (CEE 7) Measuring & Control Electronics Internal data acquisition: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection: IP32 Important notice: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC – see photos for condition) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (data media) Original operating and technical documentation Assorted connection and interface cables (Changes and errors in technical data and specifications reserved!) Further questions can be answered by phone.

Tahun pembuatan: 2001, jam operasional: 100.290 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: Simcon/32-NET Version 00.1902, tinggi dalam: 750 mm, panjang dalam: 615 mm, lebar dalam: 580 mm, kapasitas tangki yang dapat digunakan: 270 l, nomor mesin/kendaraan: 58226018400020, RINCIAN TEKNIS Rentang suhu: -70 °C hingga 180 °C Volume ruang uji: 270 L Kecepatan perubahan suhu pendinginan: 10 K/menit Kecepatan perubahan suhu pemanasan: 10,0 K/menit Penyimpangan suhu secara waktu: 0,1 hingga 0,5 K Homogenitas suhu ruang: 0,5 hingga 2,0 K Dimensi ruang uji lebar: 580 mm Dimensi ruang uji kedalaman: 615 mm Dimensi ruang uji tinggi: 750 mm RINCIAN MESIN Dimensi (P x L x T): 2.080 x 895 x 1.950 mm Hnodpfxsyfud Tj Ag Rji Tegangan: 3/N/PE AC 400 V ±10% 50 Hz Daya nominal: 14 kW Arus nominal: 26 A Refrigeran: R-404A/ R-23 Kontrol: Simcon/32-NET Versi 00.1902 PERLENGKAPAN Pintu dengan jendela Penerangan dalam Pendinginan air Port kiri: 2x NW 50 mm Port kanan: 3x NW 125 mm Pengering udara terkompresi Tipe: ZANDER

Kondisi: sangat baik (bekas), Vötsch Model: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-Cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. This unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization to enhance operational safety. Important Note: Due to these safety features, the test chamber’s software limits the temperature range to −42 °C to +150 °C. The chamber is ideal for: - Li-ion battery testing - Electronics and assembly testing - Temperature and climatic stress testing - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Standard feed-throughs installed: R1: Ø 125 mm L1: Ø 50 mm Temperature Test Data: Temperature range: -42°C to +150°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Rate of temperature change: - Heating: 4 K/min - Cooling: 4 K/min Max. heat compensation: 2300 W Climatic Test Data: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % r.H. Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature uniformity: ±0.5 to ±? K Humidity deviation (temporal): ±1 to ±3 % r.H. Heat compensation: 400 W Operating Data: Test chamber lighting: Halogen bulbs 2 x 24V, 50W 3/N/PE AC 400V±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, we provide the following information: The following points are carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant as required 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Hodpfx Asx Slm Hog Reni Scope of delivery: (See picture) (Subject to alterations and errors in technical specifications. All data without guarantee!) We are happy to answer any further questions by phone.

Kondisi: bekas, Flue Gas Cooler Hodsdnca Hopfx Ag Rsni - Flue gas cooler with protective lining - Connection: 240 Volts - Dimensions: 335/560/H390 mm - Weight: 32 kg

Kondisi: bekas, pore detector, holiday detector, surface inspection device - portable high-voltage holiday detector - the holiday detector is an ideal device for detecting pores and defects Hsdpfx Ajb Uhtqjg Roni - in dielectric (electrically insulating) coatings - such as paints, enamels, plastic coatings on all metals and concrete. - Dimensions: 390/220/H260 mm - Weight: 7 kg

Kondisi: bekas, Pore testing device, porosity detector, surface inspection instrument - Portable high-voltage porosity testing device - For detecting: pores, cracks, and other defects - Dimensions: 365 x 220 x H260 mm - Weight: 7.5 kg Hsdpob Riagjfx Ag Roni

Kondisi: bekas, Data acquisition device, testing device, communication system, data acquisition system Hjdpfxoff Nmbo Ag Rjni - DSM: Nanoserver 96M1566L - Suitable for: mobile applications - Input: 8-30 V DC, 15 A - Dimensions: 245/220/H120 mm - Weight: 2.8 kg

Kondisi: bekas, Inductive conductivity transmitter Hnsdpfxob Uhtge Ag Roi -Type: 2AMLid-184 -Sensor immersion depth: 1115 mm -Total length: 1337 mm -Weight: 3 kg