Ruang cat 12x5x5 m dengan struktur bawah

ABC-Group

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool Gbedpfxjxna U Us Agdow - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.

Kondisi: baru, berat muatan maksimum: 31.500 kg, berat keseluruhan: 42.000 kg, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2026, Perlengkapan: ABS,

Kondisi: baru, Tahun pembuatan: 2026, • External dimensions: 7,200 x 5,200 x 3,800 mm • Internal dimensions: 7,100 x 5,100 x 3,100 mm • Entrance gate: 4,000 x 3,100 mm (four-winged) • Service door: 640 x 1,800 mm • Structure: Stainless steel Gbjdpfx Agom Tv I Aodjw • Heat exchanger: Stainless steel • Panels: filled with mineral wool • Total power: 21 kW • Seating: inside/outside (following prior roofing of the cabin by the customer at their own expense) • Floor: fully ribbed • Air supply system: Jet turbine 5.5 kW – 2 units • Exhaust system: Jet turbine 7.5 kW – 1 unit • Ceiling lights: LED fluorescent panels, 32 pcs • Side lighting: LED panel 120 x 30 cm – 12 pcs Output: 48 W, single-piece, 1000 lumen • Riello RG5S burner, 160–310 kW • The cabin is available in various colors

Kondisi: baru, Tahun pembuatan: 2026, The illustrative photos show completed installations of the 4x7 spray booth for customers. The offer applies only to the spray booth without preparation area (Option to purchase a preparation zone on request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (triple-winged) - Service door: 640x1800 mm - Structure: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool filled - Total power: 16 kW - Fully grated floor - Air supply system: nozzle turbine 4.0 kW - 2 units - Exhaust system: electric turbine 5.5 kW – 1 unit - Ceiling lights: cassettes with LED fluorescent lamps, 32 pcs. - Side lights: LED panel 120x30 cm – 8 units. Output: 48 W – each Gbjdpfer Ha Ehsx Agdsw 1000 lumens - Burner Riello 40 G20 95–213 kW - The booth is available in various colors

Kondisi: baru, Tahun pembuatan: 2025, Oven powered by natural gas for powder coating applications. The oven is designed for powder coat polymerization. It is equipped with the latest heat exchanger, made entirely from stainless steel AISI 1.4301, ensuring a very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Gjdpfx Aofktipogdobw Technical data: • Power supply: 400V, 50Hz • 2 x Riello 90 kW burners • Operating temperature: 210°C • Maximum temperature: 230°C • High-grade insulation: 150 mm • Partition wall in the middle of the oven, allowing for a 50/50 ratio Equipment: • Overhead conveyor, • Hot air circulation (uniform temperature throughout the oven, accelerated heating process for parts), • Safe open/close locking system, • Timer module, • Thermoregulator (controls and maintains the correct internal temperature), • For easy transport, the oven is equipped with rails. Choose BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% customer satisfaction. All BUMEX Sp. Z O.O. products are CE-certified. We offer our own transport – prices are individually calculated per order. We issue invoices with VAT indicated. Short delivery times! Option to order machines in various individual configurations and sizes! Feel free to contact us.

Kondisi: baru, Tahun pembuatan: 2026, - External dimensions: 8125 x 4650 x 4600 mm - Internal dimensions: 8000 x 4500 x 3800 mm - Entrance gate: 4000 x 3800 mm (four-leaf) - Service door: 640 x 1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 22 kW - Seating: inside/outside (after the cabin roof has been installed by the customer on site) - Floor fully sanded - Air supply system: jet turbine 5.5 kW – 2 units - Exhaust system: jet turbine 7.5 kW – 1 unit - Ceiling lights: LED fluorescent lamp panels, 36 pcs. - Side lights: LED panel 120x30cm – 12 pcs. Output: 48 W – single element 1000 lumen - Burner Riello RG5S 160–310 kW Gbodpfx Asnbdlbogdsw - The cabin is available in various colours

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, berat benda kerja (maks.): 100 kg, daya: 88 kW (119,65 hp), suhu: 220 °C, kapasitas pemanasan: 30 kW (40,79 hp), tinggi benda kerja (maks.): 1.500 mm, panjang benda kerja (maks.): 500 mm, bahan isolasi: Steinwolle, ketebalan isolasi: 150 mm, lebar benda kerja (maks.): 500 mm, Sistem Pelapisan Bubuk Semi-Otomatis | Sistem Berbasis Waktu dengan Pra-perlakuan Kimia & Oven Pembakaran Sistem pelapisan bubuk semi-/setengah otomatis yang ringkas dan berbasis waktu untuk komponen baja (1.500 x 500 x 500 [mm]). Sistem lengkap termasuk terowongan penyemprotan 2 ruang (penghilangan minyak/fosfatasi/pembilasan), pengering air adhesi, kabin penyemprotan bubuk yang dapat dipindahkan, oven pembakaran (maks. 220°C), konveyor rantai kardan, dan kontrol PLC. Sistem baru / penawaran proyek – dimensi khusus, jenis pemanas, tata letak, dll. dapat disesuaikan secara individual sesuai dengan kebutuhan pelanggan. Konsep Sistem & Penyesuaian Khusus Pelanggan: Sistem pelapisan bubuk semi-otomatis dalam proses berbasis waktu untuk pelapisan baja yang efisien. Sistem ini menggabungkan ruang yang ringkas dengan kapasitas keluaran dan ideal untuk komponen produksi seri kecil hingga menengah. Pra-perlakuan dilakukan secara otomatis dalam proses berbasis waktu dan pelapisan diaplikasikan secara manual. Catatan tentang Perencanaan: Dimensi, rakitan, dan jenis pemanas yang tercantum di bawah ini sesuai dengan penawaran referensi yang disajikan. Semua komponen (misalnya, panjang yang dapat digunakan, dimensi kabin, jalur rantai, pemanas gas sebagai pengganti pemanas listrik) dapat disesuaikan sepenuhnya dengan dimensi komponen spesifik Anda, kondisi ruang, dan persyaratan proses. - Dimensi komponen maks. (penawaran referensi standar): 1.500 x 500 x 500 [mm] (variabel) - Beban maks. pembawa barang: 100 kg per siklus (kapasitas beban lebih tinggi berdasarkan permintaan) - Kebutuhan ruang / luas lantai: kira-kira 12.000 x 6.500 [mm] (tata letak dapat disesuaikan secara fleksibel) - Total daya koneksi: kira-kira 88 kW (maks.) - Waktu siklus / laju aliran: Waktu henti siklus kira-kira 8,5 - 12 menit dengan kecepatan rantai 3,2 m/menit Data Teknis (Ikhtisar Proyek Referensi) Jenis sistem: Sistem semi-otomatis berbasis waktu Dimensi benda kerja maks.: 1.500 x 500 x 500 [mm] (dapat diskalakan secara individual) Kapasitas beban / pembawa barang: 100 kg (beban lebih tinggi dapat direncanakan) Suhu oven: maks. 220/250°C; suhu kerja 180-200°C Pemanas pengering/oven: Gas, minyak, atau listrik (tidak langsung) Konsumsi daya maks.: 88 kW (tergantung pada ukuran sistem) Kontrol: PLC (misalnya, Siemens) Komponen Sistem dalam Ikhtisar: Gsdpfx Asulwg Nsgdebw Pra-perlakuan kimia (pembersihan semprot 3 zona): Terowongan penyemprotan 2 ruang yang ringkas yang terbuat dari baja tahan karat untuk penghilangan minyak/fosfatasi (alternatifnya nanokeramik) (40 - 45°C) serta pembilasan 2 tahap. Dilengkapi sepenuhnya dengan pompa baja tahan karat, batang nosel PPR, dan sistem pembuangan (4.000 m³/jam). Pengering air adhesi & oven pembakaran bubuk: Dua ruang yang terisolasi secara termal (100 - 150 mm wol batu) dengan pemanas listrik tidak langsung (blok termal dengan 16 atau 30 kW), ruang bakar baja tahan karat, dan sirkulasi udara yang kuat. Pengering hingga 120°C, oven hingga maks. 220/250°C (pintu pengangkat otomatis bersifat opsional) Kabin penyemprotan bubuk yang dapat dipindahkan: Kabin pelapisan terbuka yang dipasang di atas roda (2.000 x 2.100 x 2.200 [mm] dengan pembuangan ATEX (6.000 m³/jam). Unit filter terintegrasi dengan 4 katup impuls untuk pembersihan, filter setelah absolut, dan wadah bubuk portabel 60 liter Catatan: Kabin bubuk yang tertutup sepenuhnya juga tersedia! Teknologi konveyor & kontrol: Konveyor rantai kardan yang digerakkan dengan pengubah frekuensi da

Kondisi: baru, Tahun pembuatan: 2025, panjang total: 1.600 mm, lebar total: 2.200 mm, tinggi total: 2.350 mm, berat keseluruhan: 250 kg, jenis arus masuk: tiga fasa, lebar kerja: 1.400 mm, Paint booth, spray wall, extraction unit TQN1414 With right- or left-side exhaust. Godpfsd S N I Nox Agdjbw Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan power 1.5 kW • Capacity 6,500 m³/h • 2 x 100% polyester filters • Filtration efficiency of 99.9% • IP 66 control panel • Automatic filter cleaning • Hermetic lighting, IP 65 • Paint tank Booth available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machinery among those offered on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products of the BUMEX SP. Z O.O. brand are EC-certified. We offer our own transport – prices are specified for each individual offer. We issue invoices with VAT shown separately. Short delivery times! Possibility to order machines in various, customised configurations and dimensions! Please contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, I am selling a 2-head UV curing tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Gedpjffk Etefx Agdsbw Year of manufacture: 2015. Available immediately. Requires repair: display, power supplies for both UV units.

Kondisi: baru, Tahun pembuatan: 2026, Variable adjustable paint rotary table • Numerous adjustment options for small and large solid workpieces • Sturdy construction • Can be operated by one person, rotatable with rigid outriggers and adjustable swivel arms • Height adjustable Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Top quality Can be shipped by UPS by us. Gbodpfobzmagex Agdsw Requires assembly upon delivery. Location: ex stock Bitburg