Tempat penyemprotan 7.2x5.2m

ABC-Group

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.850 mm, panjang total: 12.125 mm, lebar total: 5.150 mm, berat keseluruhan: 8.000 kg, masa garansi: 12 bulan, tinggi dalam: 5.000 mm, panjang dalam: 12.000 mm, lebar dalam: 5.000 mm, Perlengkapan: kabin, pencahayaan, EN: PAINT BOOTH 12x5x5M Model from the EZ Series: - LED ceiling lighting - LED side lighting - RIELLO oil burners - Four fans, including: ‎ ㅤ- 2x supply air fans ‎ ㅤ- 2x exhaust fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm should be considered – can be positioned on the right or left side. - Structure: Galvanized steel frame construction - Heat exchanger: High-quality stainless steel - Panels: Filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibrations and the air thrust effect from the main supply air duct. Dual-layer roof: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: radial fan 7.5 kW – 2 units - Exhaust system: radial fan 7.5 kW – 2 units Air filtration system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heat-up time: 8–15 min. (max. 80°C) Nodpfjxm U Exsx Abvekw Optional equipment: - Boxes on the roof of the cabin - Insulated roof - Pass-through doors - Water wall - Color according to RAL color chart - EX version (explosion-proof) available

Kondisi: bekas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Nkedpov Uq Tljfx Abvjw Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)

Kondisi: baru, The illustrative photos show completed installations of the 4x7 spray booth for customers. The offer applies only to the spray booth without preparation area (Option to purchase a preparation zone on request) - External dimensions: 7000x4000x3500 mm Nkedpfx Aer Ha Ehjbvsw - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (triple-winged) - Service door: 640x1800 mm - Structure: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool filled - Total power: 16 kW - Fully grated floor - Air supply system: nozzle turbine 4.0 kW - 2 units - Exhaust system: electric turbine 5.5 kW – 1 unit - Ceiling lights: cassettes with LED fluorescent lamps, 32 pcs. - Side lights: LED panel 120x30 cm – 8 units. Output: 48 W – each 1000 lumens - Burner Riello 40 G20 95–213 kW - The booth is available in various colors

Kondisi: baru, - External dimensions: 8125 x 4650 x 4600 mm - Internal dimensions: 8000 x 4500 x 3800 mm - Entrance gate: 4000 x 3800 mm (four-leaf) - Service door: 640 x 1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 22 kW - Seating: inside/outside (after the cabin roof has been installed by the customer on site) - Floor fully sanded Njdpfx Abenbdlbovskw - Air supply system: jet turbine 5.5 kW – 2 units - Exhaust system: jet turbine 7.5 kW – 1 unit - Ceiling lights: LED fluorescent lamp panels, 36 pcs. - Side lights: LED panel 120x30cm – 12 pcs. Output: 48 W – single element 1000 lumen - Burner Riello RG5S 160–310 kW - The cabin is available in various colours

Kondisi: baru, Step-by-Step Painting Systems Elboy Industrial Solutions designs and manufactures a broad range of paint shops tailored to your products. With ELBOY, you can use virtual reality during the design phase to navigate through your facility, allowing you to implement desired modifications at this early stage and avoid unexpected outcomes later on. Njdpfsdy Dw Ajx Abvjkw We provide engineering and manufacturing services for your application, with particular emphasis on environmental protection and occupational safety across processes such as sandblasting, filling, washing, priming, and top-coating for all product sizes. Step by Step systems are available with overhead conveyors or floor conveyors and can be configured to accommodate products of any size. Booths for sandblasting, chemical washing, pre-coating, drying, filling, top-coating, and curing can all be integrated into the system. To carry out the processes specified by the system in sequential steps, automatic doors open upon completion of each process, and the product automatically advances to the next processing station. These fully automated systems are operated via a 15-inch touchscreen and offer various reporting options, such as main computer monitoring, product reporting, outcome reporting as required, and remote control. These are paint shops that are engineered and manufactured by our specialists according to your capacity, operational requirements, and other specifications. For requirements such as electrostatic powder coating, wet coating, sandblasting, painting, coating, washing, and similar systems, maximum efficiency is achieved with minimal staffing and optimal use of space.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW Njdpfxjxna U Us Abvokw - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.

Kondisi: bekas, Tahun pembuatan: 1987, en:Technical Details: Press force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm CNC control: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Rapid approach speed: 70 - 80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimension (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connected load: 380 V Total power requirement: 15 kW Nedpfx Aou Icc Asbvskw Approx. machine weight (total): 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel frame Available operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support: 700 mm travel, motorized, and 2 support brackets with 1500 mm travel, motorized right/left Operation via control panel with emergency stop and electric foot pedal Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump capacity 19.3 l/min Control: DNC 7000, graphic display, PC software Equipment/features: Cutting zone lighting Stroke counter Tools optional

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, CNC Lathe Mori Seiki SL403B/800, tahun produksi 2011, Jepang 2 sumbu - Sumbu X: 345 mm - Sumbu Z: 995 mm Kecepatan spindle maksimum: 2000 rpm Kontrol Fanuc mapps MSX 500-IV Chuck Kitagawa B-18 18 inch (450 mm) Diameter pembubutan: 620 mm Panjang maksimal pembubutan: 958 mm Njdpfjyffctsx Abvskw Kepala revolver 12 alat Tailstock Konveyor serpihan Probe pengukur Renishaw

Kondisi: bekas, de-hu-it-lt-001 Nedpfexmh U Hsx Abvjkw

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Connected load: 4 kW, weight: 1 t. Nksdpfshlp Efox Abvsw