Bilik semprotan

ABC-Group

Kondisi: baru, Tahun pembuatan: 2026, • External dimensions: 7,200 x 5,200 x 3,800 mm • Internal dimensions: 7,100 x 5,100 x 3,100 mm • Entrance gate: 4,000 x 3,100 mm (four-winged) • Service door: 640 x 1,800 mm • Structure: Stainless steel Godpfom Tv I Ajx Aiyoub • Heat exchanger: Stainless steel • Panels: filled with mineral wool • Total power: 21 kW • Seating: inside/outside (following prior roofing of the cabin by the customer at their own expense) • Floor: fully ribbed • Air supply system: Jet turbine 5.5 kW – 2 units • Exhaust system: Jet turbine 7.5 kW – 1 unit • Ceiling lights: LED fluorescent panels, 32 pcs • Side lighting: LED panel 120 x 30 cm – 12 pcs Output: 48 W, single-piece, 1000 lumen • Riello RG5S burner, 160–310 kW • The cabin is available in various colors

Kondisi: bekas, Tahun pembuatan: 2017, jenis bahan bakar: diesel, Perlengkapan: kabin,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW Gsdpfexna U Uox Aiyoub - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.850 mm, panjang total: 12.125 mm, lebar total: 5.150 mm, berat keseluruhan: 8.000 kg, masa garansi: 12 bulan, tinggi dalam: 5.000 mm, panjang dalam: 12.000 mm, lebar dalam: 5.000 mm, Perlengkapan: kabin, pencahayaan, EN: PAINT BOOTH 12x5x5M Model from the EZ Series: - LED ceiling lighting - LED side lighting - RIELLO oil burners - Four fans, including: ‎ ㅤ- 2x supply air fans ‎ ㅤ- 2x exhaust fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm should be considered – can be positioned on the right or left side. - Structure: Galvanized steel frame construction - Heat exchanger: High-quality stainless steel - Panels: Filled with mineral wool Guedjxm U Exspfx Aiyjb - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibrations and the air thrust effect from the main supply air duct. Dual-layer roof: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: radial fan 7.5 kW – 2 units - Exhaust system: radial fan 7.5 kW – 2 units Air filtration system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heat-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the roof of the cabin - Insulated roof - Pass-through doors - Water wall - Color according to RAL color chart - EX version (explosion-proof) available

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA Gujdpfx Aioxnlgceyjb - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, Tahun pembuatan: 2026, - External dimensions: 8125 x 4650 x 4600 mm - Internal dimensions: 8000 x 4500 x 3800 mm - Entrance gate: 4000 x 3800 mm (four-leaf) - Service door: 640 x 1800 mm - Construction: stainless steel - Heat exchanger: stainless steel Gjdpfxsnbdlbe Aiyeub - Panels: filled with mineral wool - Total power: 22 kW - Seating: inside/outside (after the cabin roof has been installed by the customer on site) - Floor fully sanded - Air supply system: jet turbine 5.5 kW – 2 units - Exhaust system: jet turbine 7.5 kW – 1 unit - Ceiling lights: LED fluorescent lamp panels, 36 pcs. - Side lights: LED panel 120x30cm – 12 pcs. Output: 48 W – single element 1000 lumen - Burner Riello RG5S 160–310 kW - The cabin is available in various colours

Kondisi: diremaj di bengkel (bekas), Robot welding system with 2 m two-station positioner. Offered here is a robotic welding system from Yaskawa Motoman, including: RM2-250 positioner Safety technology UP20 XRC robot Nozzle cleaner etc. The system can be assembled and commissioned by us. We also offer the possibility of instruction or training. The system will be reconditioned according to customer specifications. Gujdpfxjd Tfb No Aiyjb We are a YASKAWA system partner and offer you comprehensive service for your Motoman robots and systems.

Kondisi: baru, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2025,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 14 kW (19,03 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, warna: oranye, berat operasi: 2.500 kg, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, jumlah tempat duduk: 1, volume sekop: 0,07 m³, Tahun pembuatan: 2025, jam operasional: 20 h, Perlengkapan: boom yang dapat disesuaikan, hidrolik, kabin, pemanas parkir, pendingin udara, perangkat ganti cepat, sasis yang dapat disesuaikan, track baja, SPECIAL PRICE – STOCK CLEARANCE – ONLY 2 UNITS AVAILABLE! HT25 PRO Mini Excavator with 2.5 t operating weight, featuring a robust configuration for professional use in construction, civil engineering, landscaping, and municipal applications. ➡️ Special price due to stock clearance / B-grade item ➡️ Fully functional, ready for operation and immediate use ➡️ Machine with up to 20 operating hours ➡️ Includes hydraulic quick coupler and 3 buckets (25 / 50 / 100 cm) ➡️ Visual imperfections, storage marks, or transport damage possible The machine comes with a heavy-duty configuration and is designed for demanding tasks. Factory-fitted steel tracks ensure excellent stability, very good traction, and long service life even under tough jobsite conditions. Hop in, start up, and get to work – this excavator is ready for action and functions flawlessly. FEATURES & BENEFITS: • Original Kubota D1105 diesel engine • 14 kW continuous power / up to 18.4 kW peak • Water-cooled diesel engine • Standard steel tracks • Load-sensing hydraulics • Pump capacity 61.6 l/min • Hydraulic pressure up to 25 MPa • Boom with side offset • Enclosed comfort cab • Heating and air conditioning • Ergonomic joystick controls • LED work lights • Hydraulic quick coupler • Including 3 buckets: 25 cm, 50 cm, and 100 cm TECHNICAL DATA: • Operating weight: approx. 2,500 kg • Digging depth: up to 2,370 mm • Dump height: up to 3,500 mm • Transport width: approx. 1,500 mm • Travel speed: approx. 2–4 km/h • Gradeability: approx. 30° Gedpfx Aijx Hhu Nsyjub Price €15,000 net plus VAT Sales Note: Offered as B-grade / special clearance item. The machine is fully functional, ready for immediate use, and sold with a hydraulic quick coupler and a set of 3 buckets (25 / 50 / 100 cm). Visual defects, storage, or transport damages may be present. The machine has up to 20 operating hours. Location / Delivery 📍 Location: Rheda-Wiedenbrück 🚚 Delivery available nationwide and throughout Europe at extra cost 🔧 Inspection by appointment possible Only 2 machines available – while stocks last. Enquire now, secure the special price, and start working immediately.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 30214501, panjang pembubutan: 2.000 mm, panjang total: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Gjdsu Hl R Tspfx Aiyoub Centre distance mm 2000 Swing diameter over saddle mm 480 MAIN DRIVE AC drive with 2-stage gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-stage gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z plane (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle interface for tools as per DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max., with tool magazine and chip conveyor) m 11*12 Width/Height m 4.2/3.5