Saeulenschwenkkran Drehkran Kettenzug

ABUS Kran Drehkran Schwenkkran 500KG Typ VS 0,5t 500Kg 4m Abus Kettenzug

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, warna: putih, berat keseluruhan: 16.000 kg, berat muatan maksimum: 12.720 kg, berat kosong: 3.280 kg, volume ruang muat: 50 m³, lebar ruang muat: 2.480 mm, panjang ruang muatan: 7.250 mm, tinggi ruang muatan: 2.750 mm, panjang kontainer: 24 kaki,

Tahun pembuatan: 2002, Kondisi: baik (bekas), nomor mesin/kendaraan: RHKBK250KG, DEMAG KBK crane ceiling with crane runway, approx. 6x5m Load capacity / lifting capacity: 250 kg (0.25 t) Technical specifications of the system: Crane runway made from Demag KBK2 profile rails Tsderft Nhspfx Adced The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, brackets/hangers, etc. Including Demag DK 250kg electric chain hoist Crane has been dismantled and is available immediately Used condition, see photos Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are available from stock! Other KBK systems also available. Load capacities from 125kg to 1600kg. Please inquire about your crane runway with required load capacity and dimensions, no obligation.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 8.025 mm, lebar total: 3.405 mm, panjang total: 2.810 mm, kapasitas muatan per bagian penyimpanan: 250 kg, tinggi konstruksi: 50 mm, masa garansi: 12 bulan, Perlengkapan: penghadang cahaya keselamatan, Kontrol pra-pemilihan tabel dengan manajemen artikel. Perangkat berasal dari sistem lift. Pelapisan poros samping telah dibuat ulang. Tidak ada pintu akses samping. 4 perangkat tersedia. Tinggi mesin dapat disesuaikan. Lift gudang termasuk pengiriman, pemasangan, persetujuan DGUV & garansi. Tedpow S Udyofx Adced

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, CLEANROOM - ISO 8 | Requirements for Cleanroom ISO Class 8 | ISO 8 Cleanroom Classification | To achieve ISO 8 air cleanliness in Cleanroom environments, a multi-stage air filtration system is typically implemented (e.g. pre-filter G4, filter F9, final filter H13). Airflow within the room is non-unidirectional (there is mixing of "clean" supply air with "dirty" air already present in the room). Air exhausts in ISO 8 rooms are located on the walls. The required number of air changes per hour depends on the operations performed in the room and the number of personnel present, but a target range is 10–40 air changes per hour. In ISO 8 class, personnel may remain in the room continuously. Workers may wear standard workwear, and guests should wear disposable gowns. It is recommended to maintain a minimum positive room pressure relative to adjacent areas at 5–10 Pa. Requirements for equipment and materials intended for ISO 8 air cleanliness class Cleanrooms (maximum average number of particles released, when: number of samples taken = 100; measurement performed according to ISO 14644-14 in a cleanliness class at least one better than device usage class; particles/m³). Detailed description in photos. Technical drawings attached in photos. Tsdjq H H Ruspfx Adcjd Ventilation Description The goal of the installed ventilation system was to achieve the following air parameters in the Cleanroom. Construction was carried out using the GBD PHARMA 2000 system, compliant with all requirements for ‘cleanrooms’ in the highest air cleanliness classes. Parameters for the installation: a. Air cleanliness - ISO 8. b. Temperature 19–23°C c. humidity max 38%. a. To ensure the required supply air cleanliness, a DOSPEL air handling unit with a maximum capacity of V = 3500 m³/h [up to 15 air changes per hour] was used. The unit is equipped with bag filters: pre-filter FK EU5/EC2 and fine filter FK-EU9/EC2. Additionally, HEPA 11 filters by EUFILTER were fitted in ceiling diffusers. Catalog sheets in section H6. As a result, with a measured capacity of 3264 m³/h, ISO 7 cleanroom class [class “C”] was achieved at rest and ISO 8 class [class “D”] during operation. b. The temperature range of 19–23°C is easily maintained by the oversized cooler and unit at 25% fresh air share. c. To achieve the required conditions during summer with outside temperatures up to 30°C and humidity around 80%, a 31.4 kW freon cooler and a 33.5 kW refrigeration unit were used. The refrigeration unit is manufactured by FUJITSU and supplied by Klimatherm Gdańsk. The room maintains automatically regulated overpressure relative to external pressure – pressure difference at doors: 15 Pa. The ventilation automation allows for an “economy” mode, in which the system works in a closed loop, maintaining 15 Pa overpressure. Technical data attached in the photos.

Kondisi: bekas, de-hu-001 Tjdpfx Adou Nxnkscod

Kondisi: baru, en-GB Tjdohp S Trepfx Adcjd

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Floor area: 46.25 m², airflow rate: 1,000 m³/h, relative humidity: 25-35%, length: 8,500 mm, width: 5,000 mm, height: 3,341 mm, with documentation. Todpfxspcgy Rs Adced

Tahun pembuatan: 2025, Kondisi: baru, - Dengan ekstraksi terintegrasi dan pembersihan pneumatik. - Berbagai permukaan tersedia! (Kayu, kisi, pelat berlubang) Tedpfxsxzt Uhj Adcjd - Dapat dipindahkan dengan roda kemudi - Siap colok

Kondisi: baru, carrying capacity in kg: 250 kg Outreach: 4000 mm Height: 3425 mm (underside of jib) Total column height: 4,025 mm Slewing range: 270 degrees Total weight: approx. 375 kg Description: - Load capacity: 250 kg - Outreach: 4000 mm - Overall height: 4025 mm - Crane painted in RAL 1007 daffodil yellow - Design basis: DIN 15018 - Crane classification: H2/B2 - Operating location: indoor use - Size / jib profile: LS36 / shape C 110x90 - Height to underside of jib: 3425 mm - Operating voltage: 3/PE~50 Hz 400 V - Control type: direct control - Protection class: IP55 - Nominal slewing range: 270° - Manual slewing Including: - Anchor rods, size LS 36 - Consisting of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Foundation fixing, incl. accessories Electric chain hoist: - Chain hoist type: GM 2 250.6-1, single-fall Tjdjxak D Repfx Adcod - Painted in RAL 5017 traffic blue - Load capacity: 250 kg - Hook travel: 4000 mm - Maximum hook position: 3034 mm - Design basis: FEM 9.901 - Mechanism group: 2m / M5 - Lifting, 2-speed (pole-changing): 1.5 / 6 m/min - Lifting power: 0.09 / 0.35 kW - Duty cycle: 60% ED Image shows a similar crane system.

Tahun pembuatan: 2014, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: 20020235 UG, Demag ALU crane runway approx. dimensions: 6x4m Tedpfx Adjty S A Noced Payload / lifting capacity: 250 kg (0.25 t) Technical data of the system: - Crane runway made of Demag ALU rails, 180mm, with integrated power supply - System will be delivered complete: rails, rail connectors, trolleys, end plates, cable carriers, brackets/hangers, etc. - Incl. Demag DCS PRO2-250 NL 250kg electric chain hoist – lifting speed 0–16 m/min! - Demag DCS chain hoist 250kg (original price €4,700!) - For cost reduction, it can be swapped for a standard model DK2-250 – please inquire! LIKE NEW CONDITION – installed in a cleanroom! The crane has been dismantled and is available immediately. Like new condition, see pictures. Item location: 75053 Gondelsheim, Germany Shipping via freight carrier or pickup by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Demag KBK systems are also available, with payloads from 125kg up to 1,600kg. Please inquire about your specific crane runway, including cantilever load and dimensions.