Mesin EDM / EDM yang tenggelam / EDM

Agie AGIETRON SPIRIT 4

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Csdpfx Aofxyhfsa Togp Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 750 mm, jumlah slot dalam magazin alat: 36, panjang meja: 2.200 mm, lebar meja: 850 mm, model controller: OKUMA-OSP-HMI, pasokan pendingin: 15 batang, jarak dari tengah meja ke hidung spindel: 950 mm, daya motor spindle: 22 W, jumlah spindel: 36, pergerakan cepat sumbu Z: 16 m/menit, gerak cepat sumbu X: 16 m/menit, pergeseran cepat sumbu Y: 16 m/menit, hidung spindel: BT 50, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 50 rpm, beban meja: 2.500 kg, diameter alat: 120 mm, panjang alat: 400 mm, berat alat: 20 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, 3-axis vertical machining centre with OKUMA-OSP-HMI CNC Cjdsu Dinkopfx Aa Tegp

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Good day, We are offering used as well as compatible clamping devices from Erowa. These are suitable for die-sinking EDM and milling applications. Here are some of the available parts: ER-008617 Measuring Arbor ER-010723 Control Arbor ITS 50 ER-010561 Replacement Probing Pin ø 2mm ER-010560 Replacement Probing Pin ø 5mm ER-093992 Square 25 Holder C F-Tool Holder with Square 25 ER-010592 Square 25 Alignment Ruler ER-010495 Square 15 Alignment Ruler ER-129072 Universal Plate Collet Holder ø 72 ER16-ER50 Dial Indicator with Magnetic Base 3D Probe ø1-5 Steel Pallet ø148mm All parts have been cleaned and inspected by us. Additionally, a functionality test has been carried out. Cjdpfjvby U Sox Aa Tegp Spare parts are available. If you have any questions, please do not hesitate to contact us.

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Csdpfsu A Dn Nex Aa Togp

Tahun pembuatan: 2007, Kondisi: diremajakan ulang (bekas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in water bath) / 800 kg (out of water bath) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup Cjdemmfwuepfx Aa Tjgp AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled upon receipt of order. You will receive a 6-month warranty on all machine components. We are also pleased to offer you commissioning and training services.

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) Csdpfx Ajd N H A Noa Tjgp - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1980, Sägeblattdurchmesser 380 mm pneumatische Klemmung ja Masch.-Nr.: 46893 Maschinengewicht ca. 1,3 t +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++ Cgjded N Sm Djpfx Aa Tep

Kondisi: bekas, Tahun pembuatan: 2009, x-axis travel: 1,800 mm y-axis travel: 700 mm z-axis travel: 700 mm Control: iTNC 530 Heidenhain Speed range - main spindle: 20 – 18,000 rpm Drive power - main spindle: 25 / 35 kW Max. torque: 130 / 87 Nm Tool holder: HSK A63 DIN 69893 Swiveling B-axis: +/- 100° Table clamping surface: 2,100 x 700 mm Max. table load: 1,500 kg Number of T-slots: 7 Table diameter: 750 mm Max. table load (rotary table): 500 kg Number of T-slots (rotary table): 7 Rotatable C-axis: 360° Number of tool positions: 30 Tool holder: HSK A63 DIN 69893 Max. tool weight: 6.0 kg Max. tool diameter: 80 mm Cgsdpoyhhtgefx Aa Tep Max. tool diameter with adjacent vacant pocket: 130 mm Max. tool length: 300 mm Chip-to-chip time: 7.6 sec Rapid traverse (X / Y / Z): 40 m/min Acceleration: 4 m/s² Max. feed rate: 40,000 mm/min Feed force (X / Y / Z): 8 kN Total power requirement: 70 kVA Machine weight: approx. 13.0 t Required space: approx. 7.0 x 6.2 x 2.8 m 5-axis CNC gantry-type milling machine DECKEL MAHO - DMF 180 New Design - Swivel milling head (B-axis) - Integrated rotary table - Internal coolant supply - Operating hours: spindle hours approx. 10,000 h

Kondisi: bekas, Tahun pembuatan: 2008, Jangkauan gerak: Sumbu X = 350 mm Sumbu Y = 250 mm Sumbu Z = 220 mm termasuk pendingin Berfungsi penuh Codpfxow Swd Ae Aa Tsgp

Kondisi: bekas, Tahun pembuatan: 1979, de-sn440-gewicht Cjdpef Dwa Uefx Aa Tjgp