Perangkat udara bersih / pengekstrak debu segera tersedia.

AL-KO Power Unit 120 M

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Dusdpecnw U Dofx Adgol Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: baik (bekas), Tahun pembuatan: 2019, Weinig Conturex Greenline Plus CNC Fensterfertigungsmaschine Beschreibung: Baujahr: 2019 Bearbeitungslänge Werkstück: 4.500 mm Automatische Teilekontrolle am Einlauf Spannbackenverstellung in Verbindung mit Falzspannern Hauptantrieb 30 kW indirekt angetrieben Unispindel zum Zapfen, Bohren und für Sonderbearbeitungen Werkzeugwechsler mit 35 und 17 Plätzen Werkzeugaufnahme HSK 63F Spezielle Software zur Maschinen- und Betriebsdatenerfassung Pufferstrecke Ein-/Auslauf: 2.000/2.500 mm Optionales Werkzeugsatz/Plan verfügbar Komplette Beschreibung auf Anfrage Dodpfxsw N Nixo Adgoul (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer in technischen Daten, Preisen und Angaben vorbehalten. Keine Garantie für abgedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise zzgl. Inseratskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 1997, connected load: 380V, 5.2A, 2.0kW, saw blade diameter: 350 mm, swivels 45° to both sides, height adjustable via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, right-side roller conveyor with stop, cutting length: 3200 mm, left-side roller conveyor with stop, cutting length: 2200 mm Dsdpfxowhn T Uo Adgjul

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Dedpfenl Nqqex Adgsul

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), 2054 1 used, partially refurbished and function-tested Alphatec extruder type AE-S 75.28 Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC motor Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control – type Inspection possible at our facility in Wuppertal. Further extruders available. Djdpfxsiyya Aj Adgsul

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Large, semi-automated Polar 137 XT-Autotrim Pace cutting line with stack lift, jogging system with counting scale, gripper transport system, turning gripper, and unloader Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed in the jogger by the operator, jogged, and then transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as needed. After cutting, the Transomat automatically stacks the layers onto a pallet, Duodpfxoxd U Sao Adgel allowing cutting to continue simultaneously. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1,200 kg Equipped with continuously adjustable photoelectric sensors for automatic lifting or lowering. Jogging System RAH-4 with air-removal roller and rear-table discharge Working size up to 75 x 105 cm The jogged material is automatically discharged to the rear into the STR stacking rack. The Autotrans gripper transport system then takes over layer transport to the rear table of the high-speed cutter. Sheet scale – Polar counting scale Avery Weigh-Tronix For creating precisely counted cutting batches Gripper transport system POLAR Autoturn – clamp transport to rear-table loading and rotary gripper takes over the prepared cutting batch from the stacking rack or buffer table. Via air tables, which optimize the conveying process via an air cushion, the material is transported directly onto the rear table of the high-speed cutter and placed precisely in position. During transport, the cutting batch is held firmly by the grips, ensuring the batches remain perfectly square and aligned, even when pre-aligned, during transfer. Polar 137 XT-AT cutting machine with touch operation and Autotrim function for automatic trim waste removal beneath the front table. - Lowerable side gauge left (required for rear table loading), also allows formats with a diagonal of

Kondisi: bekas, nomor mesin/kendaraan: 007350, X-axis working range: 4000 mm Y-axis working range: 1400 mm Dsdpfxjwcyd Ij Adgsul Working area: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Kondisi: baru, Glazing Bead Nailer "2 P Jumbo automatic E.C." - new - Your benefits: - Corner joints are completely closed - No open glazing bead joints - No color discrepancies during painting - Glazing bead frames are easy to allocate Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle guide, clamping fixture from above and front Pressure can be regulated separately. Insertion of parallel and stacked staples possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Joining Machine 2P with the optional mobile work table (see details under additional charges) Duedpfx Adovnh T Negjl Additional Charges: ----- Mobile Work Table Height-adjustable from 700 – 1000 mm, 2 removable support beams, 1000 mm long, 2 swiveling and sliding support beams 1000 mm, support beams covered with felt, 4 swivel casters, 2 of which with locking mechanism. ----- Additional charge: 992.00 Euro net Staples: Packages 15 mm staples (pack of 2,000 pcs.): Price 21.00 Euro 12 mm staples (pack of 3,000 pcs.): Price 31.00 Euro 10 mm staples (pack of 3,000 pcs.): Price 31.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (technical data according to manufacturer – no liability assumed!)

Kondisi: bekas, 04480 Mitre and Crosscut Circular Saw Graule ZS 135 N Used This machine type is designed for crosscutting as well as horizontal and vertical mitre cuts; double mitre cuts are also possible. - Precise ball bushing guide for the tool carriage on hardened and ground steel shafts - Fast mitre adjustment up to 25° horizontally and up to 45° vertically - Re-adjustable fixed stops at 90° and 45° Dusdpfow Htm Rox Adgel - Machine can be set for mitre cuts in two axes - Adjustable aluminium fence plates - Robust cast iron construction - Lower blade guard connectable to extraction system - 3 kW three-phase brake motor, 400 Volt (special equipment) - Saw blade diameter: 350 mm - Saw blade bore: 30/40 mm - Cutting height: 135 mm - Cutting length: 430 mm - Saw blade tilted at 45°: cutting height 92 mm - Includes saw blade for aluminium, 350 mm diameter - Includes machine stand for type ZS 135 N - Includes roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop foldable to the rear, roller diameter approx. 40 mm Transport dimensions of machine approx. 1300 x 700 x 1700 mm (L x W x H), roller conveyor approx. 3000 x 500 x 800 mm (L x W x H) Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale is made as-is. Technical data, description of condition, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner; no guarantee given. Subject to prior sale. No warranty is provided for used machinery; the following applies: "sold as inspected". Terms of payment: prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex stock.

Kondisi: baik (bekas), OFFER 70105 Technical Specifications: - Hole diameters approx.: 44, 45, 48, 52, 2 x 55, 2 x 58, 61, 66 mm - 2 x 68, 2 x 80, 81, 85 mm Dedpfx Adeg T S Axogsul - Slot dimensions approx.: 12 x 42, 12 x 50, 18 x 55 mm - Punch holder: 58 mm - Punch height: 54 + 58 mm - Adapter ring for punch - Die height: 30 + 40 mm - Die external diameter: 90 + 140 mm - Adapter ring for dies: 90 - 140 mm - Weight approx.: 90 kg