Automatic Side Sealer

AMTEC SIDE W60-XXXL PRO H180

Tahun pembuatan: 2012, Kondisi: bekas, de Dsdpov Sqxisfx Aavjcp

Kondisi: bekas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right & left) Dsdpfx Aowypqljavscp Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center partition): approx. 2000 x 950 mm - Table size of fixture-changing plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control: YZNC-OP186 - Teach panel: JZNC-T834B - Robot: YRFL-NNA06WB - Automation unit by ECKHARDT type ROBO Robot payload: 6 kg Net weight (robot only): 180 kg The entire system is configured as a compact welding cell. Robot control cabinet positioned adjacently. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirement for welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Weight of welding cell with robot: 1055 kg Space requirement for control and control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight of control and control cabinet: 300 kg Overall space requirement of the system (L x W): approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic case erector for efficient and cost-effective packaging processes. The cardboard is automatically taken from the magazine, erected, and sealed from the bottom (one direction). The erected cartons are then transported out on a conveyor belt and collected for filling. Specifications: SIEMENS PLC, SIEMENS touchscreen; carton size in mm: L(250-450)xW(150-400)xH(100-400); max. idle machine cycle rate: 12 cycles/minute; power supply: 110/220V, 0.3kW; compressed air: 5-6 bar, 0.4m³/min; tape width in mm: 48/60/75; machine dimensions: L2300xW1900xH1700mm; weight: 650kg. Please note that our new prices are often below typical prices for used machines. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we also offer very short lead times starting from approximately 3 weeks. - All machines are available with full warranty. Djdpfx Aasv Nkvpovocp

Tahun pembuatan: 2018, Kondisi: baik (bekas), Mesin las sudut otomatis penuh / Mesin las sisi otomatis penuh Dedpfxotzcd Ss Aavscp Produsen: Diez Tipe: AWS-C 9070 CS Tahun pembuatan: 2018 Terowongan penyusutan Produsen: Diez Tipe: HTC 122-40D Tahun pembuatan: 2018 Sisi pengoperasian: Di sisi kiri arah aliran Lebar bukaan: sekitar 600 mm Tinggi bukaan: sekitar 190 mm Panjang las: sekitar 900 mm Tinggi kerja / tinggi ban masuk-keluar: sekitar 860 mm +100 Kapasitas: Hingga 30 siklus/menit (tergantung pada ukuran paket dan kecepatan pengumpanan) Tegangan suplai: 230V AC, 50Hz, 1 Fasa + N + PE Konsumsi daya: 3,5 KW Arus nominal: 10 A Dilengkapi dengan kabel dan steker Schuko 16A Sambungan udara bertekanan: 6 bar Dimensi luar: Panjang: 2600 mm Lebar: 2000 mm Tinggi: 1500 mm 41126

Tahun pembuatan: 2023, Kondisi: baru, Semi-automatic auger dosing unit for 100–5000 g dosing applications. Suitable for dosing and filling powdered products. Stand-alone version including auger feeder and supply hopper. Included features: horizontal discharge auger to prevent unwanted product dribble, dust extraction interface, PLC control system with touch screen, weighing sensor (operates automatically with each dosing cycle), pouch clip mechanism, auger screws for 500 g and 2000 g dosing, lid for the auger feeder for enclosed operation. Suitable for filling bags, cans, jars, and other containers. – Auger doser specifications: Hopper volume: 50 litres; fill weight: 10–5000 g (auger screw change required); stainless steel design AISI 304; servo motor; filling accuracy: 1–2% (depending on product and total weight); max. machine cycle rate, idle: 50/min; power: 1.5 kW, 3-phase, 380 V; machine dimensions: L600×W800×H1000 mm; weight: 100 kg. The auger feeder comes with a stainless steel housing and tube. The feed hopper holds 230 litres and includes a vibration motor for consistent product flow. – Auger feeder specifications: Conveying capacity (dependent on product): up to 3 m³/h; standard incline angle: 45° (customer-specific adjustment possible, 30–60°); tube diameter: 141 mm; power: 3 kW, single phase, 380 V; machine dimensions: size depends on customer-specific final setup (hopper, conveying length and angle can be customised); weight: approx. 150 kg. The sketch only depicts the auger doser. Dedpfx Aaegzp Ekovecp Please note: Our prices for new machines are often lower than common used machine prices. Feel free to send us an enquiry, stating your specific packaging requirements. – We typically have 30–50 different new machines immediately available from stock. For customer-specific machine builds, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with a full warranty.

Kondisi: bekas, Tahun pembuatan: 2007, Shrink wrapping machine Hugo Beck CWS 500 Year of manufacture: 2007 Description: Dedpfjulixqjx Aavecp - L-sealer - Shrink tunnel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Packing capacity: 60 cycles/min, max. product width: 450 mm, max. product height: 200 mm, conveyor speed: 8 m–30 m/min, film thickness range: 10 µm–80 µm, max. temperature: 170°C, total power: 25 kW. Machine dimensions L/W/H: approx. 4000 mm/2400 mm/1800 mm, weight: approx. 1500 kg, control system: Delta. Documentation available. On-site inspection possible. Djdpfx Aasudm A Aevscp

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Fully automatic side sealing machine for packaging products—regardless of their length—with complete wrapping and without film overlap. The maximum output is 120 cycles per minute. Product feeding is carried out via a conveyor belt while simultaneously guiding the product into a centerfold film using a forming shoulder. Dcedpfxsw E Igvo Aavep The feed belt can be smoothly adjusted to accommodate different product widths. The film tube, with the wrapped and aligned products inside, is hermetically sealed on the side by a side sealing unit. After the product has been wrapped in film, cross sealing is performed using a continuously heated, infeed sealing system. The height of both the forming shoulder and sealing units can be manually adjusted. The remaining film waste strip is collected on a film take-up reel. Wear parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical Data: Cross sealing bar: 550 mm Film: Centerfold film, approx. 12 – 80µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 120 mm Min. product width: 80 mm Working height: 780 – 930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Kondisi: baru, Tahun pembuatan: 2025, Stand-alone auger filler with weight feedback via connected weighing unit. Operated via touchscreen and PLC. Hopper volume: 50 liters. Filling weight: 10-5000g. Stainless steel version with servo motor. Includes: fill level sensor on the opening storage hopper for easy cleaning, adjustable filling head height, free-flow module for improved product flow control, and dust protection cover. Djdpfx Aev Nk Edsavocp Specifications: Packaging accuracy (depending on product and total weight): 0-2% (for 0-100g), 0-1% (for 100-500g), 0-0.5% (for 500g and above); max. machine output in idle mode: 50 cycles/minute; Power: 220V, 1.4kW; Machine dimensions: L1150xW1000xH2100mm; Weight: 200kg. Please note that our new machine prices are often below typical used equipment prices. Please feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. – All machines are supplied with a full warranty.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, de2pl02 Dcodpjg D Uuiefx Aavep