Pengering

ANGELO CREMONA model ER 18

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line For any inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator Crodpsilqvrsfx Aqxod - Additional top and bottom drying lamps - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1994, nomor mesin/kendaraan: SN1744271, crane jembatan ± 11.550 mm x 5.000 kg Crjdpsv Ipvxefx Aqxsd

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Cjdpfx Aefxpbmsqxjrd

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Complete line consisting of: Crjdpovm An Ejfx Aqxed 1. Angelo Cremona Peeling Lathe – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Splicer – description and photos available in the listings PEELING PLANT comprised of: Log Centering Loader 1. Model CE08 2. Angelo Cremona 3. Positions the log for loading onto the peeling lathe 4. Power supply 400Vac/50Hz – 50kW Maximum hydraulic pressure 100 bar Compressed air consumption 0 L/min Weight kg Maximum dimensions 600x300x400 5. Production capacity: 4 logs per minute Peeling Lathe 1. Model SFH870 2. Angelo Cremona 3. Produces a veneer ribbon by turning the log 4. Power supply 400Vac/50Hz – 240kW Maximum hydraulic pressure 100 bar Compressed air consumption 10 L/min Maximum dimensions 600x400x300 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled veneer strip to the guillotine for optimized sheet cutting 4. Power supply 400Vac/50Hz – 70kW Maximum hydraulic pressure 100 bar Compressed air consumption 0 L/min Maximum dimensions 300x200x200 5. Production capacity: 50 cubic meters per shift Grading Line and Vacuum Stacker 1. Model LTR27 2. Angelo Cremona 3. Separates and stacks recovery sheets from full-size sheets 4. Power supply 400Vac/50Hz – 180kW Compressed air consumption Maximum dimensions 300x1300x500 5. Production capacity: 50 cubic meters per shift

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Cjdpfx Aev Si Szeqxjrd Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, panjang total: 36.000 mm, Flatironing dryer, working width 4,600 mm, length 22,000 mm (of which 10,000 mm with pressure rollers), separate pressing/cooling section, heating medium: hot water, semi-automatic feeding device, type BFT46 with lifting platform, max. veneer length: 4,600 mm, roller width: 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017. Crsdpfxjv Hygfj Aqxsd A second flatironing dryer of a similar design is also available.

Kondisi: bekas, Tahun pembuatan: 1997, Lini 3 mesin Stenner MHS9 dari tahun 1997 Crsdpfx Aqsw Nrhkoxjd

Kondisi: sangat baik (bekas), TECNI-ARMENTIA CH-70 Edging Machine – Hydraulic control – Programmable cutting width Codpfjidmptsx Aqxerd – Storage for up to 12 programs – Centering feed table TECHNICAL SPECIFICATIONS: Maximum cutting width: 700 mm Maximum cutting height: 130 mm Main motor power: 55 kW Maximum material width: 830 mm Fixed sleeve length: 300 mm Movable sleeve length: 100 mm Minimum material length: 700 mm Spindle diameter: 65 mm Sleeve diameter: 85 mm Saw blade diameter: 350 - 400 mm Feed speed: Stepless hydraulic adjustment Maximum feed speed: up to 38 m/min Feed table: 2700 mm Roller width: 700 mm Roller diameter: 140 mm Centering infeed table Two lasers Pump motor power: 4 kW Anti-kickback pawl row Three upper feed rollers Three lower feed rollers Hydraulic material hold-down Hydraulic height adjustment Dimensions (L/W/H): 480 / 200 / 230 cm Weight: 4000 kg

Kondisi: sangat baik (bekas), panjang total: 3.000 mm, lebar total: 1.500 mm, Press panel dalam kondisi kerja sangat baik + finger jointing Grecon Cedst Uduxjpfx Aqxjrd

Kondisi: baru, The Brugger PX170 wood chipper is powered via the tractor’s PTO and is capable of shredding logs with a diameter of up to 17 cm. Its robust construction and high-quality materials ensure reliable performance. Crsdpfsrblx Hsx Aqxjd Technical specifications: - Hydraulic feed - Maximum log diameter: 17 cm - Weight: 570 kg - PTO speed: 540 rpm - Suitable for tractors: 40–100 hp Equipped with hydraulic feed, it offers an efficient solution for wood processing in various agricultural and forestry applications. Contact us for your customised quotation!