Mesin cetak injeksi

Arburg 270 S 250-100

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 36 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1024-54, Made in Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic increment: 1 mm Feed rate: 100–3500 mm/min Reversal delay: 0–5 sec. Max table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350x32x127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel angle (right): 15° + 30° Optional wheelset guard for max wheel width: 50 mm WORKPIECE SPINDLE (WORKHEAD): Swivel range: 0° – 90° Speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max workpiece weight: 20 kg Max load during between-centres grinding: 12 Nm Option – infinitely variable speed range I: 30–300 rpm Option – infinitely variable speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Iaodpow T Sc Nefx Aa Nel Between centres: 400 mm / measured over 400 mm: 0.002 mm Between centres: 650 mm / measured over 650 mm: 0.003 mm Roundness accuracy for between-centres grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permitted voltage variations: -15% to +10% Permitted frequency variations: +/- 3% Compressed air: 5 bar The above technical data are given without obligation and subject to errors or omissions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 used injection moulding machine Isdpfxju Eu Tno Aa Neal Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tonnes Tie bar spacing: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Full stainless steel construction for 2 Euro pallets with a load height of 1,500 mm maximum 80 crates with dimensions 400 x 300 x 300 mm (L x W x H) External dimensions: Width x Height x Depth: 2,450 mm x 2,678 mm x 2,050 mm Chamber internal dimensions: 2,066 x 1,795 x 1,340 mm (Width x Height x Depth) Insulation thickness: 40 mm Standard equipment includes electronic pasteurization control, consisting of: - Adjustable heating rate (also dependent on the heating capacity of the steam boiler) - Setting the desired pasteurization temperature - Setting the desired holding time - Setting the shutdown temperature - Electronic temperature recorder for product and chamber temperature Air circulation via 1 high-performance radial fan with stainless steel impeller Steam injection into the air duct for optimal steam distribution Pneumatic steam valve Iajdpfx Aasclq Ixe Nel Switch-over flap for fresh air supply for cooling Central condensate drain with DN 100 connection socket for channel pipe 4 adjustable feet on rubber pads Steam consumption: approx. 80 kg per hour at 1 bar Power consumption: 5.5 kW Weight: approx. 650 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Mikron / GF HPM 450 U WPC with Pallet Changer About the Machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, comprehensive equipment! Very low spindle hours! Technical Data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45 / -120 ° Ijdpfx Aex Hx Rhsa Nsal - C-axis: 360 ° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine positions: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec - Feed force X-Y-Z: 5 kN - Rapid traverse X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Equipment: - 7 pallets, of which 6 with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction - Tool blow-off device - Blow air at spindle carriage - Blow air through spindle center - Internal coolant supply 18 - 70 bar - Paper band filter unit - Chip conveyor - Spindle oil cooler Dimensions (L x W x H): 6600 x 4000 x 2800 mm Weight approx. 8,600 kg Inspection / test under power on site is of course possible. We are not your average machine dealer -> Here you are advised by CNC experts! We are pleased to offer you transport, moving, installation, commissioning, and training for the machine — all with our own technicians. All from one source: We, Baumgärtner CNC GmbH & Co.KG, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repairs, you can count on us.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Iajdpfx Aothd Shsa Nel Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 83.000 h, gaya penjepit: 350 kN, diameter sekrup: 25 mm, For sale: Injection moulding machine by Arburg, model 320S 350-60 Iodpfx Aehhuq Asa Nsal Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide on request and for an additional fee. Price incl. VAT Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection Iasdpfxevambco Aa Nsl >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: baik (bekas), Tahun pembuatan: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main data: Table surface: 605 x 300 mm Max. longitudinal table travel (manual): 750 mm Cross table travel: 340 mm Grinding height (min./max., table to new grinding wheel): 22.5 / 322.5 mm Standard magnetic chuck size: 600 x 300 mm Workpiece weight incl. magnet: 420 kg X-Axis / Longitudinal Travel: T-slots (number x width): 3 x 17 mm Table feed, hydraulic: 0.3 – 25 m/min Iaedpjw Dvkaofx Aa Nel Travel per handwheel revolution: 47 mm Y-Axis / Vertical Feed: Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm Graduation per handwheel division (x1/x10): 0.001 / 0.1 mm Spark-out strokes: 0 – 5 Rapid traverse: 400 mm/min Z-Axis / Cross Travel: Automatic cross feed, intermittent: 0.5 – 20 mm Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min Travel per handwheel revolution: 5.0 mm Graduation per handwheel division: 0.02 mm Standard grinding wheel: Diameter x width: Ø 355 x 38 (50) mm Bore: Ø 127 mm Speed: 1500 rpm Accessories: various grinding wheels Documentation

Kondisi: bekas, Cutter Hersteller: Seydelmann Modell: K 204 Ultra Ausführung: Edelstahl Volumen: 200 Liter 2 Messergeschwindigkeiten 2 Schüsselgeschwindigkeiten 2 Mischgeschwindigkeiten Abmessungen: 280x205x255 cm Elektrische Leistung: 78 kW Isdetu I T Espfx Aa Njal Spannung: 400 V, 3-phasig, 50 Hz

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tonnes Screw diameter: 25 mm Iaodohrw Amjpfx Aa Nsl Year of manufacture: 2003 Sprue picker 2 units