Mesin cetak injeksi

Arburg 320C 500-100 mit Multilift

Kondisi: baik (bekas), Tahun pembuatan: 2003, jam operasional: 106.864 h, gaya penjepit: 1.300 kN, diameter sekrup: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on schedule. Good condition, fully functional Hnedpfx Aasrp Dyrsnel Still in operation until week 11 Additional service reports and documentation available Technical data: Year of manufacture: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve on the injection unit for especially high dynamics and reproducibility of the injection process, back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic power optimization and corresponding energy reduction through stepless adjustment of the pump drive speed to match the respective power requirements of the injection cycle - VE 460/00 ED electromechanical dosing drive via a frequency-controlled three-phase asynchronous motor to increase productivity through simultaneous movements, more gentle material preparation, and relevant energy savings compared to hydraulic dosing Loading and transport (Europe-wide) can be organized on request, at an additional charge. Prices plus VAT Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to contact us, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, 1 used injection moulding machine Hedswf I Hijpfx Aanenl Manufacturer: NETSTAL Model: ELION800-270 Year of manufacture: 2007 Clamping force: 80 tons Tie bar distance: 410 x 410 mm Minimum/maximum mould height: 500 mm Opening stroke: 350 mm Screw diameter: 35 mm Maximum shot volume: 123 cm³ Shot weight in PS: 118 g

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, A used four-column stamping press MABU with MPC200 control, in very good technical condition. Pressing force 30° before BDC: 250 kN Stroke rate, steplessly adjustable: 80-400 strokes/min Stroke adjustment: 7-62 mm Tool holder: diameter 40H7 x 90 mm Clearance between columns front/side: 404/334 mm Further technical data see PDF document. Hsdpfx Ajuh U Etjansnl Technical data and dimensions: Subject to errors.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical primary movements powered by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical primary movements with servo drives: dosing, injection, mould opening/closing, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Compact hydraulic unit with pressure accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine mounting plates with centring ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal injection unit 400 • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing unit D25 mm, high wear/ corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25) • Heating band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mould height adjustment • Prepared for mounting a linear robot on the fixed platen • Mould protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blower unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, switch cabinet, interfaces: • Selogica control • Software packages (Pos 555: Advanced mechanical cycle controls; Advanced movements; Production control; Optimisation/operator support; Quality assurance control; Documentation) • Temperature-controlled switch cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorisation via card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mould temperature measuring zones (Pos 469/12) • Additional heating band for nozzle (Pos 468/01) • Interface for HB-Therm temperature controllers (Pos 453/01) Hnodpfx Aajx D Hgvjnol • USB-serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for colour dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/reject parts (Pos 375/00)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jam operasional: 84.840 h, gaya penjepit: 1.300 kN, diameter sekrup: 50 mm, tekanan injeksi: 2.080 batang, berat injeksi: 297 g, Arburg 420C-1300-675 (167) Article number: 167 Availability: In stock Year of manufacture: 2000 Brand: Arburg Technical Data Shot weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Injection pressure: 2080 bar Tie bar distance: 420 x 420 mm Platen size: 615 x 615 mm Minimum mould height: 350 mm Control system: Selogica Language: German Hedpfxsvt Rvqe Aanonl Power: 44.9 kW Operating hours: 84,840 h Weight: 4,330 kg Dimensions: 4.9 x 1.8 m Hopper: No Core pull: Yes Air valve: Yes Robot interface: Yes

Kondisi: baik (bekas), 1x Arburg 370U 500-170 bekas Dengan Multilift Tersedia segera! Hedpoyym R Nofx Aansnl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Arburg 320C 600-250 / Machine in very good technical condition Year of manufacture: 2001 Injection Unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Metering volume: 144 cm³ Clamping Unit: Clamping force: 60 t Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition The machine has been used to produce injection-moulded parts for the medical industry – clean production conditions Core pull control Hardened injection unit – bimetallic Integrated sorting flap Dimensions: Weight: 2,330 kg Length/Width/Height: 3.65 x 1.48 x 1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started up by our service technicians before sale. Hodey Smqmepfx Aanjnl It is possible to obtain a video of the technical tests of the selected machine or to attend live technical tests at our facility in Łódź. Price: On request