Injection molding machine

Arburg 570 S 2000-800 mit Multilift Select

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Arburg injection moulding machine, year 2000. 130 tonnes clamping force. The machine is delivered fully refurbished at our facilities in Heras (Cantabria). New seals in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660x840 mm OPENING STROKE: 575 mm MAX. DISTANCE BETWEEN PLATENS: 800/850 mm TIE BAR DISTANCE: 420x420 / 470x470 mm Crsdpferxtpdex Aavsi SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.000 kN, Perlengkapan: dokumentasi / manual, 1 Cjdpsx Ir Ngsfx Aavori

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 28.600 h, Fungsionalitas: berfungsi sepenuhnya, Mesin telah direvisi sebagian oleh Willemin dengan geometri baru. Siap untuk produksi. Asal pembuatan: CH Tegangan: 3x400V / 60Hz; 50 A; 35 kVA Dimensi: 270x200x260 cm Berat bersih mesin: 2500 kg Credsw T Tk Iopfx Aavoi SPESIFIKASI TEKNIS WILLEMIN MACODEL 508 MT Kontrol: Fanuc 31i A5 Sumbu X: 450 mm Sumbu Y: 200 mm Sumbu Z: 425 mm Sumbu B: -45° sampai +100° Sumbu U: 300 mm Magasin alat: 48 posisi PickUp Spindel utama A: maks. Ø42 mm, maks. 6.000 rpm Spindel utama C: maks. Ø42 mm, maks. 3.000 rpm Spindel bermotor untuk milling: HSK40E, maks. 30.000 rpm Kecuali terdapat kesalahan atau kelalaian, semua data teknis diberikan tanpa komitmen.

Kondisi: bekas, de-techspecs-001 Cjdpfx Aaex Tiwlsvjri

Tahun pembuatan: 1978, Kondisi: bekas, Press force 25 t Stroke 100 mm Table area 440x320 mm Ram area 360x220 mm Pass-through opening in table 160x100 mm Table height 900 mm Ram pinhole Ø 40 mm Installation height 280 mm Machine weight approx. 1.5 t Required space approx. WxDxH 1500x1500x2100 mm Sick light grid for cyclical operation Csdpelp U A Iefx Aaveri Two-hand control Rapid/traverse – working stroke Stroke- and pressure-dependent shut-off Approved only for use with safety tools

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: FANUC, model controller: 16i-MB, berat keseluruhan: 1.700 kg, kecepatan spindel (min.): 500 rpm, kecepatan spindel (maks.): 30.000 rpm, daya motor spindle: 10.000 W, hidung spindel: HSK-E40, jumlah slot dalam magazin alat: 48, panjang alat: 95 mm, diameter alat: 63 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, arus masuk: 25 A, Pusat pemesinan CNC WILLEMIN W 408MT KARAKTERISTIK TEKNIS: Tahun pembuatan: 2006 Kontrol CNC: FANUC 16i-MB Csdjzcx Dfepfx Aavori Jumlah sumbu: 5 Perjalanan sumbu X: 250 [mm] Perjalanan sumbu Y: 200 [mm] Perjalanan sumbu Z: 300 [mm] Kecepatan pemakanan pada sumbu X, Y, dan Z: 30000 [mm/menit] Diameter batang maks. pada spindle pembubutan: 32 [mm] Kecepatan maks. spindle utama: 6000 [rpm] Daya maks. spindle utama: 3.7 [kW] Perjalanan sumbu C sudut: 360 [°] Perjalanan putar sumbu B: 115 [°] Tipe spindle: HSK-E40 Kecepatan minimum spindle: 500 [rpm] Kecepatan maksimum spindle: 30000 [rpm] Daya spindle: 10 [kW] Jumlah posisi magazin penukar alat: 48 Panjang alat maks.: 95 [mm] Diameter alat maks.: 63 [mm] Kapasitas tangki pelumasan: 80 [l] Laju alir pompa pendingin: 40 [l/menit] Arus nominal: 25 [A] Tegangan suplai: 400 [V] Bobot mesin: 1700 [Kg] Informasi lebih lanjut tersedia atas permintaan.

Kondisi: bekas, Technical details: Credpfx Aeu Nfwloavoi Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Pressure test performed up to 2.3 t. Good condition.

Kondisi: bekas, Single-column Hydraulic Press DUNKES Type HZT 2.5 Machine No. H94-2558 Year of manufacture: 1994 Press force: 2.5 tons Throat depth: 180 mm Table dimensions: 420 x 300 mm Pass-through opening in table: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Credpsh Uhqyjfx Aavoi Max. installation height: 250 mm Rapid down movement: 65 mm/sec Rapid up movement: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Electrical connection: 400 Volt, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and stroke cut-off - Two-hand operation on the machine - Stroke counter - Fail-safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for hand insertion operations) - 32,047 recorded operating hours - Electrical and hydraulic circuit diagrams available Required space (L x W x H): 1,100 x 980 x 1,950 mm Weight: 700 kg Very good condition

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jam operasional: 766 h, gaya penjepit: 400 kN, diameter sekrup: 18 mm, Mesin cetak injeksi hidraulik, tahun pembuatan 2024. Mesin Arburg Allrounder 270 C 400-70 ini memiliki gaya penguncian 400 kN dan tekanan injeksi spesifik maksimum 2738 bar. Mesin ini menawarkan rentang tinggi cetakan dari 160 hingga 475 mm dan jarak antar spindel 280 × 280 mm. Jika Anda mencari kapasitas cetak injeksi berkualitas tinggi, pertimbangkan Arburg Allrounder 270 C 400-70 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. - Tekanan injeksi spesifik maks.: 2738 bar Crjdjz Eq S Nspfx Aavei - Volume perpindahan maks.: 28 cm³ - Tinggi cetakan: 160 – 475 mm - Jarak antar kolom: 280 × 280 mm - Diameter pemusatan (pengeluaran/nosel): 110 mm / 125 mm - Jam operasional (pompa): 766 jam - Tarik inti: 1 - Sirkuit kontrol pemanas: 3 sirkuit kontrol pemanas elektrik untuk pemanasan cetakan, maks. 2 kW/230 V - Sirkuit pendingin: Sirkuit pendingin spesifik mesin yang dapat diprogram, distribusi air pendingin dengan 3 sirkuit bebas (DN 13) - Spesifikasi nosel: Nosel terbuka 18 mm dengan ulir dalam M 24x1,5, ujung nosel datar, sabuk pemanas nosel - Kontrol: Kontrol langsung SELOGICA dengan antarmuka pengguna layar sentuh 15 inci (38,1 cm) - Konektivitas & antarmuka: Konektivitas dasar (koneksi Ethernet pada CPU, gateway IIoT), antarmuka robot EUROMAP 67 (50 pin), otorisasi operasi kartu chip EUROMAP 65, antarmuka CompactFlash dan USB, antarmuka printer (serial/USB), antarmuka untuk unit warna dan dosis

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 203129, gaya penjepit: 400 kN, diameter sekrup: 18 mm, volume langkah: 23 cm³, We offer the following well-maintained pre-owned injection moulding machine as a specialist dealer in injection moulding machines: We also actively purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a large-scale dealer for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and cylinder replaced) Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Material diverter The machine features retrofitted interfaces for: - Tool temperature control - Heating channel - Colour dosing/colouring Crjdpfjx Rvcisx Aavji via Siemens Logo PLC control German language - from first ownership, sourced in Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mould height: minimum 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: maximum 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty up to first commissioning Loading/Shipping: Free loading onto buyer’s truck or delivery by freight reimbursement Available ex-warehouse Hannover, Germany Please note about our company and the machines we offer: - We only sell machines acquired directly from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested prior to removal - We do NOT sell insolvency assets and we are NOT brokers dealing with third-party property - All machines on offer come from successful companies for whom maintenance and servicing are a matter of course - All machines are available for inspection at our warehouse