Mesin cetak injeksi
Arburg ALLROUNDER 720 H 3200-1300 244136

Name: Arburg ALLROUNDER 720 H 3200-1300 244136
Brand: Arburg
Availability: InStock

Tahun pembuatan

2018

Kondisi

Bekas (berfungsi sepenuhnya)

Lokasi

Burgoberbach Jerman

Mesin cetak injeksi Arburg ALLROUNDER 720 H 3200-1300 244136

Arburg ALLROUNDER 720 H 3200-1300 244136

Data mesin

Nama mesin:: Mesin cetak injeksi

Pabrikan:: Arburg

Model:: ALLROUNDER 720 H 3200-1300 244136

Nomor mesin:: 244136

Tahun pembuatan:: 2018

Kondisi:: sangat baik (bekas)

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

Lokasi:: Ansbacher Str. 19, 91595 Burgoberbach, Deutschland

Hubungi

Rincian teknis

Gaya penjepit:: 3.200 kN

Diameter sekrup:: 55 mm

Jarak antara tiang:: 720 mm

Volume langkah:: 570 cm³

Tekanan injeksi:: 2.000 batang

Berat injeksi:: 521 g

Tinggi cetakan (min.):: 300 mm

Panjang total:: 7.460 mm

Lebar total:: 1.848 mm

Tinggi total:: 2.267 mm

Berat keseluruhan:: 20.000 kg

Rincian penawaran

ID iklan:: A22345822

Pembaruan:: terakhir pada 17.07.2026

Deskripsi

Dijual mesin cetak injeksi dari produsen Arburg, Tipe 720 H 3200 - 1300, tahun 2018. Kondisi mesin sangat baik.

Gaya penguncian: maks. 3.200 kN
Gaya pembukaan cetakan: maks. 110 kN
Jarak pembukaan: maks. 600 mm
Tinggi pemasangan cetakan (variabel): 300 mm hingga 800 mm
Jarak antar pelat (variabel): maks. 900 mm hingga 1.400 mm
Jarak antar kolom (T x L): 720 mm × 720 mm
Ukuran pelat penahan (T x L): 1.040 mm × 1.040 mm
Berat maks. bagian cetakan yang bergerak: 2.900 kg
Gaya pengeluaran | Jarak: maks. 86 kN | 250 mm
Diameter sekrup: 55 mm
Panjang sekrup efektif (L/D): 22
Langkah sekrup maksimum: 240 mm
Volume langkah terhitung: 570 cm³
Berat maks. produk cetakan (dalam polistirena/PS): 521 g
Tekanan injeksi maksimum (tekanan massa): 2.000 bar
Laju aliran material maksimum (PS): 86 kg/jam
Aliran injeksi maksimum: 713 cm³/s
Tekanan injeksi spesifik (maks.): 2.000 bar
Gaya penekanan nosel | Jarak pengangkatan (maks.): 90 kN | 550 mm
Daya pemanas / Zona pemanas: 22,9 kW | 8 zona
3. Nilai sambungan & Berat mesin

Lodezl Tc Topfx Al Nohi
Berat bersih mesin (tanpa oli): 18.550 kg
Isi oli (hidraulik): 410 liter
Sambungan air pendingin: maks. 30 °C | min. 1,5 bar perbedaan tekanan (Δp) | Ukuran nominal DN 25
Daya penggerak (motor pompa): maks. 60 kW
Total daya sambungan (listrik pada 400V/50Hz): 84 kW
Arus maksimum / Sekering:
Mesin total: 125 A
Pemanas: 40 A
Jika diinginkan, pengangkutan dan pemuatan dapat diatur dengan biaya tambahan di seluruh Eropa.

Harga belum termasuk PPN.

Pemeriksaan dapat dilakukan setelah perjanjian. Hubungi kami, tim kami akan dengan senang hati membantu Anda.
Penerimaan atau pertukaran barang bekas dimungkinkan!

Mesin: Penjualan / Pembelian
PEMBELIAN / PENJUALAN MESIN PRODUKSI & MESIN PENGOLAHAN LOGAM, DLL.
Gjbn N Ay Dowza Dxogoil
Apakah Anda membutuhkan mesin pengolahan logam berkualitas tinggi, tetapi dengan harga terjangkau untuk produksi Anda? Atau apakah Anda ingin menjual mesin Anda?

Untuk informasi lebih lanjut atau cara menghubungi, kunjungi situs web kami.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2017

198 Iklan online

Hubungi

Kirim permintaan

Pesan*

Nama*

Email*

Telepon

Perusahaan

Kode pos dan lokasiTanah

Saya adalah seorang pedagang

Dapatkan penawaran untuk mesin serupa

Catatan: Permintaan Anda akan diteruskan ke semua penjual di kategori mesin. Dengan ini, Anda dapat menerima sangat banyak penawaran.

Kebijakan Privasi

Telepon & Faks

+49 9805 ... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Arburg Allrounder 520S 1600-400 Arburg Allrounder 520S 1600-400

Jerman

11.248 km

Arburg Allrounder 520S 1600-400
ArburgAllrounder 520S 1600-400

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 67 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, berat keseluruhan: 5.900 kg, produsen pengendali: ARBURG, model controller: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine includes a take-out robot and an enclosure with a FilterFanUnit to ensure clean operation. Ideally suited for precision plastics processing, it offers a mould height of 250 mm and a platen gap of 825 mm. Please contact us for further information regarding this machine. Additional equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical advantages of the machine • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 variable displacement pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Central mounting platen set, 125 mm • Machine raised by 100 mm (enhanced vibration elements) • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mould • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits Lhsdpfxsx D E Dye Al Nsi • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heating standby mode • Sound pressure level: 70 dB(A) | ± 3 Additional Information • Screw diameter: 45 mm • Injection pressure (max): 1580 bar • Shot weight (max, g PS): 232 g • Heating capacity: 9.7 kW | 5 zones • Net machine weight: 5900 kg

Lihat detail

Iklan kecil

Arburg 1200T 2000-800 (vertikal, meja putar, jam operasional: 9.562) Arburg 1200 T 2000-800

Trenčianske Stankovce

10.519 km

Arburg 1200T 2000-800 (vertikal, meja putar, jam operasional: 9.562)
Arburg1200 T 2000-800

Hubungi

Iklan kecil

Mesin cetak injeksi Arburg Allrounder 520S/1600-400

Jerman

11.023 km

Mesin cetak injeksi
ArburgAllrounder 520S/1600-400

Hubungi

Iklan kecil

Thermokonténer, 780 lítra kælirými TKT C-780

Moers

11.276 km

Thermokonténer, 780 lítra kælirými
TKTC-780

€399

harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2015, Used thermocontainer; however, in exceptionally good condition, ready for immediate use. Model designation: C-780ü (Various thermocontainers in stock, ranging from 580 liters to 1170 liters capacity, see further photos) Technical Data: Inside dimensions: 610 x 810 x 1570 mm Outside dimensions: 735 x 955 x 1900 mm Weight: approx. 98 kg Capacity: approx. 780 liters With slide-in rails for grids Features: - Central door locking mechanism - 2 side pull handles - 1 folding handle recessed in door - Undercarriage with 108 mm castors, PA, suitable for cold storage use - Door retainer - Internal tub with slide-in rails - Angle supports with edging - PE panels (2 mm thick), light blue - Profiled bump protection plates (3-sided) - 2 fixed castors, 2 swivel castors - Lockable with padlock - Load capacity up to approx. 400 kg - REFURBISHED Fine cleaning is to be carried out by the buyer. Offer consists of one container. Color depending on stock availability. Approx. 100 units in stock. We offer the opportunity to view the units by prior telephone appointment on Tuesdays and Thursdays between 9 a.m. and 4 p.m. If required, the item can be collected immediately. Unless otherwise specified, this is used equipment. The items have been visually inspected and are otherwise technically in order. Shelves and cooling plates are not included in the offer, but are also available from us. For time management reasons, we can only respond to inquiries regarding this item if you provide a phone number. Lhedpod Syg Sjfx Al Noi Price stated is net per unit plus currently applicable VAT. All offers ex-stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Images are similar, as not every individual item is shown)

Lihat detail

Iklan kecil

Mesin cetak injeksi ARBURG 470 C 1500-400 Golden Editions

Hattingen

11.239 km

Mesin cetak injeksi
ARBURG470 C 1500-400 Golden Editions

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2008, Ref.-No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar distance (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight: 750 mm Injection Unit Screw diameter: 35 mm Shot volume: 154 cm³ Shot weight PS: 141 g Injection pressure: 2500 bar Ledexvy Rlepfx Al Nohi Dimensions and Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-Series, featuring optimized hydraulic performance, stable process management, and outstanding reliability. This machine offers a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as applications with high quality requirements. Typical benefits of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good spare parts availability * Suitable for continuous industrial operation The Golden Edition further distinguishes itself with optimized performance and excellent value for money on the used machinery market. Thanks to its versatility, this machine is frequently used in sectors such as automotive supply, technical plastic parts, and series production.

Lihat detail

Iklan kecil

Wrocław

10.574 km

Penggiling
Wanner TechnikC13.20 SV

Hubungi

Iklan kecil

Mesin cetak injeksi ARBURG 320 C 500 - 170

Jerman

11.023 km

Mesin cetak injeksi
ARBURG320 C 500 - 170

Hubungi

Iklan kecil

Mesin cetak injeksi Allrounder 520 C 2000 Arburg Allrounder 520 C 2000-675

Weil der Stadt

11.183 km

Mesin cetak injeksi Allrounder 520 C 2000
ArburgAllrounder 520 C 2000-675

€8.199

~~€8.500~~

EXW harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 95.239 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 173937, gaya penjepit: 2.000 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, tinggi cetakan (min.): 250 mm, panjang total: 5.100 mm, lebar total: 1.800 mm, tinggi total: 2.200 mm, berat keseluruhan: 6.630 kg, Perlengkapan: dokumentasi / manual, The machine was running perfectly until the very last day before the new machine was delivered. Therefore, the machine is in good used condition. Due to a lack of space in the injection molding area, the machine is being sold and is no longer connected to power. Pump / injection unit / clamping unit are leak-free. Machine manual is available. Videos of the machine are available. Operating hours pump: 95,239 Operating hours automatic: 86,082 Ledpfx Aev D Nxljl Njhi Repairs carried out in recent years: - Filter replaced annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed incl. new piston

Lihat detail

Iklan kecil

Arburg 570 S 2200-800/290 Arburg 570 S 2200-800/290

Rumania

11.248 km

Arburg 570 S 2200-800/290
Arburg570 S 2200-800/290

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, gaya penjepit: 2.200 kN, diameter sekrup: 70 mm, berat injeksi: 172 g, Arburg 570 S 2200-800/290 ini diproduksi pada tahun 2020. Mesin ini dilengkapi dengan sistem penggerak hidrolik dan kontrol Selogica untuk pengoperasian yang presisi. Dengan gaya clamping 2.200 kN dan diameter sekrup 40 mm, mesin ini sangat ideal untuk tugas injection molding yang detail. Manfaatkan kesempatan ini untuk membeli mesin injection molding hidrolik Arburg 570 S 2200-800/290. Hubungi kami untuk informasi lebih lanjut. Lhjdpfx Alsx Nkp Ie Nei Unit Pengunci • Jarak antara tie bar: 570 × 570 mm • Stroke pembukaan: 650 mm • Gaya ejektor: 70 kN • Stroke ejektor: 200 mm Unit Injeksi • Ukuran unit injeksi: 290 • Tekanan injeksi: 2.500 bar • Volume shot: 188 cm³ Penggerak & Kontrol • Sistem penggerak: Hidrolik • Kontrol: ARBURG Selogica

Lihat detail

Iklan kecil