Mesin CNC untuk frais dan bubut

CMZ TTL-66-66-T1Y-T2Y

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 220 mm, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 240 mm, jarak lintasan sumbu Y: 90 mm, jarak gerak sumbu Z: 580 mm, No reserve price – guaranteed sale to the highest bidder! The original price of the machine was €342,000! Laedpfx Aoy Ukhhsbvsg Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. passage / max. clearance: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance / distance between centers: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main Spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter Spindle / Sub-Spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Centre Morse taper: MT3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool Holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven Tools Number of rotating stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque / S1: 42 / 32 Nm Fluids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubrication oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage per table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS CNC control: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with one set of soft jaws for right spindle Measuring arm Hinged belt chip conveyor with side discharge Upper turret station (T1) dual high-pressure pump (6+15 bar, 55 l/min) Internal turret station (12) dual high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic workpiece unloader Workpiece unloader with pneumatic open/close function for collecting ejected parts Pneumatic part ejector for sub-spindle with 100 mm stroke, stroke adjustment, and end position sensor Unimag interface for bar feeder

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, LAGUN BM4RT, Mesin Bubut Vertikal Produsen: Lagun Lsdpfx Aezmpydsbveag Tipe: BM4RT Tahun Pembuatan: 2018 Kondisi: berfungsi, bekas, seperti baru Jam operasi: 1650 jam Jam penggunaan spindel: 438 jam Pengendali: Heidenhain iTNC 640 Video tersedia. Informasi lebih lanjut tersedia berdasarkan permintaan.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. Laodpfx Aoxmhdnebvsg The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Pergerakan XYZ: 610 x 406 x 406 mm, meja diameter 400 mm, kapasitas beban meja maks 226 kg, kemiringan meja +120°, -35°, 22,4 kW, 10.000 rpm, BT40, penukar alat 30 posisi, pendingin, konveyor serbuk. Lsdpszg Enqjfx Abveag

Kondisi: bekas, TECHNICAL DATA - Number of Axles: 3 Laodpswyx Rnjfx Abvjg MAIN SPINDLE - Spindle Nose: A2-8" - Spindle Drive Power: 26 kW - Spindle Speed: 3,000 rpm - Max. Bar Capacity: 91 mm - Max. Machining Diameter: 430 mm - Max. Swing over Bed: 650 mm - Minimum C-Axis Resolution: 0.001° TURRET - Number of Positions: 12 - Number of Driven Stations: 12 - Travel X/Z: 245/1,040 mm - Tool System: BMT65 - Driven Tool Speed: 5,000 rpm - Driven Tool Power: 5.5 kW TAILSTOCK - Tailstock Type: Numerical - Taper: MT4 - Tailstock Travel: 966 mm - Quill Stroke: 100 mm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power Input: 41 kW WEIGHT AND DIMENSIONS - Footprint: 3,780 x 1,610 mm - Machine Height: 1,937 mm - Machine Weight: 6,500 kg OPERATING HOURS - Operating Hours: 0 h EQUIPMENT - Control: Siemens 828D - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-In Programming: SHOPTURN - 3-color Status Light - Coolant Tank * with High-Pressure Pump: 10 bar * with Rinsing Gun - Chip Conveyor - Tool Measurement Probe - Parts Catcher - Bar Feeder Preparation - Preparation for Steady Rest - 3-jaw Chuck: SAMCHULLY 305 mm

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] Ljdpfxouhb Uho Abvsag - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Tahun pembuatan: 2015, Kondisi: baru, shaft furnace clear internal height: 1100 mm clear internal diameter: 790 mm external diameter: 1560 mm external height (without lid): 1480 mm Laodpecdi D Dofx Abvjg external height (with lid): 2300 mm electric heating: 40 kW circulation fan: 2.2 kW three-phase connection: 400 V, 50 Hz maximum temperature: 750°C

Kondisi: bekas, DATA TEKNIS - Jumlah poros: 7 - Jumlah spindel: 2 SPINDEL UTAMA - Diameter batang maksimum: 20 [mm] - Panjang pemrosesan maksimum: 205 [mm] - Kecepatan spindel: 10000 [RPM] - Daya penggerak spindel: 3,7 [kW] - Resolusi minimum sumbu C: 0,001 [derajat] SPINDEL LAWAN - Diameter batang maksimum: 20 [mm] - Kecepatan spindel: 8000 [RPM] - Daya penggerak spindel: 2,2 [kW] - Resolusi minimum sumbu C: 1 [derajat] - Jumlah dudukan bus: 1 DUDUKAN BUS 1 - Jumlah posisi: 10 - Jumlah posisi yang digerakkan oleh motor: 4 PERALATAN BAGIAN DEPAN - Jumlah posisi: 7 PEMROSESAN DENGAN SPINDEL LAWAN - Jumlah posisi: 4 - Jumlah posisi yang digerakkan oleh motor: 4 - Kecepatan perkakas yang digerakkan: 8000 [RPM] SUPPLAI LISTRIK - Tegangan suplai: 400 [V] - Total daya penggerak: 7 [kW] BERAT DAN DIMENSI - Luas yang dibutuhkan: 2200 x 1200 [mm] - Tinggi mesin: 1700 [mm] - Berat mesin: 2200 [kg] JAM KERJA MESIN - Jam saat beroperasi: 107555 [jam] - Jam operasi: 91025 [jam] - Jam spindel: 54783 [jam] AKSESORI - Pengontrol: Fanuc 300is-model A - Bus panduan yang digerakkan - Pengambilan komponen - Konveyor sabuk komponen - Pengeluaran komponen - Tangki cairan pendingin Lasdsy Dim Iepfx Abveg

Kondisi: bekas, Tahun pembuatan: 1982, Rincian teknis: Diameter piringan: 2600 mm Diameter putar di atas support: 2500 mm Panjang putar: - mm Lsdpswtctyefx Abvjag Jarak antara pusat: 1600 mm Diameter putar di atas tempat tidur: 2900 mm Lubang spindle: 100 mm Kecepatan putar: langkah gigi U/menit Rentang feeding: pembubutan memanjang 0,12-31,5 mm/menit, pembubutan muka 0,12-45 mm/menit Panjang rel alas: 2900 mm Berat benda kerja maksimal di antara pusat: 400.000 kg Kebutuhan daya total: 45 kW Berat mesin sekitar (semua komponen): ± 29,0 t Dimensi mesin PxLxT: 5,2 x 5,0 x 3,1 m Sistem pengukuran 3 arah dengan tampilan digital RSF-Elektronik Panel pengendali Unit pendingin lemari kontrol Rittal

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), 1 used short bar loader Manufacturer: Breuning Model: ILS RBL 80/12 Year of manufacture: 2016 Lasdpfjht Rl Eox Abvog Clamping range: 5-80 mm diameter Bar length: 100-1200 mm