Gergaji potong

ASKLA PAR01

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Bjdjw Sy T Hepfx Ahwjcw Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Tahun pembuatan: 1984, Kondisi: sangat baik (bekas), Blade diameter: 550 mm Minimum cutting length: 500 mm Minimum cutting width: 100 mm Maximum cutting height: 160 mm Bsdpfxslrtnte Ahwocw Minimum cutting height: 40 mm Pneumatic clamps

Kondisi: bekas, Tahun pembuatan: 2014, Stromab CT600 Automatischer Aufwärtshub-Kappsäge für Gerade- und Gehrungsschnitte – Baujahr 2014 CE 6000 mm Einlaufkapazität 2000 mm Auslauftisch 12" Touchscreen-Grafikdisplay Power 1000 Steuerung Fernprogrammierung der Schnittliste über farbiges Grafik-Touchscreen-Panel – Verbindung per USB-Stick. 5 Optimierungskriterien – längstes Maß, geringster Verschnitt, Priorität-Maß, nach Volumen oder nach Wert. Bsdpfewl Hyuex Ahwscw Eingabe der Schnittliste über Steuerungstastatur Grafische Darstellung des Werkstücks. 10-PS-Motor Zahnstangenantrieb für Schiebesystem mit Magnet-Messleiste für hohe Wiederholgenauigkeit der Zuschnitte 600 mm Sägeblattdurchmesser SCHNITTLEISTUNG POSITION A) # max. Höhe Bei 0°: 200 x 215 mm oder 50 x 370 mm Bei 30°: 200 x 185 mm oder 50 x 325 mm Bei 45°: 200 x 150 mm oder 50 x 265 mm SCHNITTLEISTUNG POSITION B) # max. Breite Bei 0°: 160 x 315 mm oder 40 x 410 mm Bei 30°: 160 x 270 mm oder 40 x 350 mm Bei 45°: 160 x 220 mm oder 40 x 285 mm Winkeleinstellung -70 Grad, 0 Grad, +70 Grad Verstellbare Sägeblattvorschubgeschwindigkeit Vertikale Spannvorrichtung Horizontale Spannvorrichtung Absauganschlüsse: 1 x 100 mm, 1 x 120 mm Schutzhaube aus Plexiglas mit Gasdruckfedern Baujahr 2014, CE-geprüft

Kondisi: bekas, Tahun pembuatan: 2004, OC700-20240625-1 Bsdpfox Eblvsx Ahwocw

Kondisi: baru, Tahun pembuatan: 2025, Professional machine for eliminating defects in wood and wooden components. It optimizes the cutting process and ensures minimal material loss. The CROSS CUT 306 optimizer is a new technology for woodworking machines, manufactured by CNC Technologies, the leading brand on the Polish market. The machine enables fast, easy, and precise tailor-made cuts, thereby increasing production efficiency. The optimizer performs cross-cutting of material into sections of specified length, eliminates material defects marked with a fluorescent pen, and analyzes the pen’s position using a sensor. It is worth mentioning that the machine can measure and cut in an automatic cycle. Model: TechnologiesCNC CROSS CUT 306-4M Effective working length – 4000 mm (optional 6 m) Effective working width – 30–230 mm Effective working thickness – 40–80 mm Effective cross-section processing – 250 x 30 mm Scanning speed – 80 m/min Scanning device – Infrared sensor by German manufacturer SICK Error detection/scanning – Fluorescence sensor by German manufacturer SICK Table height – 800 mm Feed speed – 60 m/min Push servo drive – AC DELTA 750 W Saw lift servo drive – AC DELTA 1 kW Cut-off saw motor – 7.5 kW, 3Ph, 2930 rpm Cut-off saw blade diameter – e.g. 500 mm Extraction connector diameter: 100 mm x2 Total power: approx. 10 kW Overall dimensions – 6750 x 1450 x 1800 mm Bcjdotvmv Rspfx Ahwsw Transport dimensions: 535 x 80 x 110 – table, 200 x 100 x 160 – console Weight: 1436 kg

Kondisi: sangat baik (bekas), Garis pemotongan melintang Bjdpfsyf Dy Dex Ahwjcw Pisau pemotong diameter 400 mm Pendorong elektronik

Kondisi: baru, Tahun pembuatan: 2024, Customizable Saw: The Ideal Solution for Small and Medium Cross-Sections Complete Optimization, High Precision, and Maximum Speed in a Single Tool The TRV 1200 is the perfect saw to tackle daily challenges in single-board processing, whether raw or coated. Featuring advanced technology, this ultra-fast and efficient cutting system enables operation optimization without operator stress. Whether for small or medium cross-sections, the TRV 1200 is engineered to fulfill all your requirements, providing a continuous working cycle that guarantees flawless performance. Intelligent Operation and Full Automation With the innovative touchscreen interface, cutting lists can easily be uploaded directly from the machine or remotely from your office. Once you select the desired optimization, the system autonomously manages all subsequent steps, including: - Material feed (*see Cursal accessories) - Automatic feed and positioning - Instant data transfer to the CNC and optimization - Ejection of processed components - Selection of quality, width, and length (*see Cursal accessories) Maximum Speed and Precision Without Compromise The TRV 1200 operates at exceptional speeds: 195 m/min, self-limited by the brushless servomotor. The synergy between a powerful optimizer, an indestructible machine structure, and precise table control guarantees perfect results. CNC-controlled motorized belts and pneumatic pressure rollers ensure optimum material positioning. Full Versatility for Any Processing Requirement The TRV 1200 seamlessly adapts to various applications, from recovery operations and defect removal to more complex tasks requiring advanced software processing. It is the ideal partner for optimizing every phase of your production process, yielding maximum results with minimal waste. Advanced and User-Friendly Programming Software - Over 100 pre-set cutting plans: customizable widths, qualities, and cutting specifications - Multiple optimization options: for commercial value, for waste, for quantity, for length, and mixed optimization - Optimization simulation to guarantee optimal material management - Continuous monitoring of processed quantities Bcsdpjv Ip Uzsfx Ahwew - Internal optimization within the machine frame to streamline processes and save valuable space Advanced Numerical Control for Efficient Management At the heart of the TRV 1200 is the powerful CNC—an industrial computer ensuring uninterrupted, continuous production. With the HD touchscreen, you can easily import data via USB and access user-friendly yet powerful software that is quick to learn and simple to operate. Additionally, online remote support is available to resolve real-time issues. Discover how the TRV 1200 can transform your production: speed, precision, and optimization—at the touch of a button.

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 131/04, lebar total: 2.400 mm, tinggi total: 3.100 mm, panjang total: 3.200 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 3.000 kg, lebar kerja: 1.500 mm, tinggi kerja: 180 mm, daya: 50 kW (67,98 hp), Mesin kerja kayu Storti GSI/150-AL (2004). Lini semi otomatis yang memerlukan dua operator untuk mengisi meja berukuran ganda. Mesin ini dapat memproduksi palet Standar Inggris (1200 x 1000 mm), Euro palet (1200 x 800 mm), dan palet dua arah. Bcjdpfxeydm H Do Ahwow

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, – konstruksi kokoh PARAMETER TEKNIS: – lebar potong maks: 3050 mm – lebar potong min: 450 mm – tinggi potong maks: 125 mm – diameter pisau – tiga unit pemotong – setiap unit pemotong dapat diatur secara independen: 500 mm – daya motor: 3 x 4 kW – daya motor penggerak: 1,5 kW – dua kecepatan penggerak – penekan material – majalah pemuatan papan – dimensi transportasi (P/L/T): 620 / 200 / 120 cm Bcsdpfxow Nau Se Ahwjw – berat: ~ 800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.500 mm, panjang total: 11.300 mm, tinggi total: 1.800 mm, lebar pemotongan (maks.): 350 mm, diameter mata gergaji: 550 mm, lebar rol: 430 mm, diameter spindel: 35 mm, panjang pemotongan (maks.): 5.300 mm, diameter lubang cakram: 35 mm, CEMIL TR550 Crosscut Saw Semi-Automatic Specification: • Condition: used, ready for operation • Manufacturer: CEMIL • Model: TR550 • Max. working width: 350 mm • Max. working height: 130 mm • Maximum cutting length: 5300 mm • Blade diameter: 550 mm • Blade arbor diameter: 35 mm • Blade speed: 3080 rpm • Right outfeed table length: 5050 mm • Left table length: 6000 mm • Table and feed width: 430 mm • Adjustable cutting speed • Adjustable feed pusher speed • Operates in both automatic and manual modes • In automatic mode, the machine allows setting of parameters such as cutting length, number of cut pieces, board length, and waste length • Extraction port diameter: 140 mm • Weight: approx. 280 kg • Manual in Italian, controls partially translated into Polish • Overall dimensions assembled: 11300 x 1500 x 1800 mm (L x W x H) Bsdpfx Aewa Dhlohwecw • Machine body dimensions: 1100 x 1500 x 1800 mm (L x W x H) Additional information: • Very good original technical and visual condition • The photos show the actual condition of the item offered for sale • Possibility to power up and test the machine on site • The price listed in the auction does not include VAT