Pusat mesin

Weeke BHX 500

Kondisi: bekas, nomor mesin/kendaraan: 005910, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 1300 mm Daya spindle utama: 6 kW Jumlah sumbu yang dikontrol: 3 sumbu Guodpfx Ajwuckhohmoi Jumlah spindle bor: 84

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: A3347169, Fungsionalitas: berfungsi sepenuhnya, jumlah sumbu: 3, Mesin CNC SCM, Record 100 AL action line, lini pemrosesan kayu 3-sumbu, 400V, tahun pembuatan 16/07/2008, panel listrik, kontrol alas keamanan, dinding pembatas, area kerja 305 x 122 cm, ukuran total mesin: sekitar 565 x 250 x 260 cm, pembongkaran sendiri 3 sumbu Guodpfx Aoxg El Aohmoi Berfungsi sempurna 1 vakum besar dengan detail pelat putih dan 1 vakum kecil: Tahun 2019 / N°A3347169 Tipe VTLF2.250/0-79 Frekuensi 50/50Hz Kecepatan 950/1150min-1 Kebutuhan daya 5,5/6,4kW Kapasitas masuk 244/286m³/h Maks vakum 200/200mbar Video tersedia.

Kondisi: bekas, nomor mesin/kendaraan: 008176, arbeitsbereich-achse-x-3050-mm-arbeitsbereich-achse-y-1250-mm-le istung-haupt-spindel-10-kw-anz-kontrollierte-achsen-3-achsen-anza hl-bohrspindeln-25-anzahl-werkzeugplaetze-4 Gsdpfx As Ahwxzohmeui

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, WEEKE BHX 500 – Operator Side Right Weeke machining center with one machining support each on the top and bottom Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2500 mm Min. workpiece width: 70 mm Max. workpiece width: 1000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Gsdpjx S Hzljfx Ahmoui Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit, each located in the upper and lower machining support, with 21 drilling spindles each (individually addressable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in the upper and lower machining support, each with 10 drill spindles individually selectable via the control software: 8 spindles each in the X-direction 2 spindles each in the Y-direction N2 X-Y 90° Grooving saw unit, each located in the upper and lower machining support for machining in the X-Y direction, swiveling 90°. Cutting depth: 30 mm SUPPLEMENT FOR GROOVING SAW BLADE Saw blade width may be 8.4 mm. The chip removal cross-section must not exceed 70mm². F2-ETP-6 KW Milling unit, each located in the upper and lower machining support, suitable for use with shank tools. Manual tool change. Tool clamping: manual hydro quick-release system ETP 25 Rotation direction: clockwise/counterclockwise Spindle speed: 6,000 – 18,000 rpm, infinitely programmable Processing up to 3000 mm Infeed table with automatic workpiece feeding and positioning Workpiece removal area with cross-belt conveyor and lifting arms – Workpiece length measuring system integrated in the machine – Movable operator terminal – Barcode software incl. scanner

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Gusdpfxeiidm Ns Ahmsi Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 2011, CNC – Pusat Pemesinan Kontinu Merek: Weeke Tipe: Optimat BHX 500 Tahun Pembuatan: 2011 Data Teknis Area kerja X: 2500 mm Area kerja Y: 1300 mm Ketebalan benda kerja maksimum Z: 80 mm Jumlah spindel frais: 2 Daya spindel frais: masing-masing 6 kW Kecepatan spindel frais: hingga 18000 RPM Pemasangan alat: ETP 25 Total spindel bor: 84 Bor vertikal atas: 32 Bor horizontal atas X: 8 Bor horizontal atas Y: 2 Bor vertikal bawah: 32 Bor horizontal bawah X: 8 Bor horizontal bawah Y: 2 Unit gergaji alur: 2 Gergaji alur: dapat disetel 0 / 90 derajat di atas dan di bawah Kecepatan gergaji alur: 7500 RPM Pengontrol: PowerControl Perangkat lunak: woodWOP Gujdpfx Ahezzzfbomei Jumlah sumbu: 3 Total daya terpasang: sekitar 20 kW Catatan: Data teknis dan deskripsi adalah salinan dari konfirmasi pesanan saat itu. Informasi ini hanya untuk tujuan informasi dan tidak mengikat.

Kondisi: bekas, Tahun pembuatan: 2012, Automatic CNC machining center for efficient and precise drilling and milling of wooden panel furniture components. Numerical control PC 85 - woodWOP 6 software. Safety enclosure for the machining head. 2 clamps for securing and moving the workpiece during processing. Loading station with air cushion table. Minimum part dimensions (X - Y - Z): 250 x 100 x 8 mm (2 x 4 mm). Maximum workpiece dimensions (X - Y - Z): 3000 x 1000 (optionally 1300) x 80 mm (2 x 40 mm). Capability for simultaneous processing of two panels. 2 machining heads (one below and one above), each with the following configuration: * Upper vertical machining unit: 1 vertical ETP-6 electrospindle (6 kW power), 1 grooving saw (90° on X-Y axis), dia. 125 mm, 32 vertical drilling spindles (2.7 kW), 10 horizontal drilling spindles (8 in X, 2 in Y). * Lower vertical machining unit: 1 vertical ETP-6 electrospindle (6 kW power), 1 grooving saw (90° on X-Y axis), dia. 125 mm, 32 vertical drilling spindles (2.7 kW), 10 horizontal drilling spindles (8 in X, 2 in Y). Panel removal via motorised roller conveyor. Safety system with perimeter fencing and front safety mats. Gsdpfx Ahsvz A E Tjmoui

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 Godpfx Ahodt Rgvjmjui VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), static working head - Horizontal table (workpiece) PowerControl PC86 powerTouch control unit (woodWOP software) Safety enclosure for working head No. 2 workpiece clamps for access to the working area WEEKE pre-positioning unit - for faster workpiece positioning in the machine with clamps. Infeed table (workpiece support) to entry point - outfeed table (with powered conveyor belt) With automatic panel pusher Min. workpiece dimensions (X-Y-Z) mm 200 x 70 x 8 (2 x 4 mm) Max. workpiece dimensions (X-Y-Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) No. 2 workpieces can be processed simultaneously (in Z-axis) Separate control cabinet and operator console WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power kW 2.3) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) Godpjyyvttofx Ahmsui No. 1 grooving saw unit (swivels 90° in X-Y direction) Diameter (mm) 125 No. 1 vertical main spindle (milling unit) ETP (main vertical spindle power (kW 6)) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power kW 2.3) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction) Diameter (mm) 125 No. 1 vertical main spindle (milling unit) ETP (main vertical spindle power (kW 6))

Kondisi: sangat baik (bekas), 3-sumbu (X-Y-Z) PUSAT PEMROSESAN CNC "FLEXIBEL" Pelat bergerak (benda kerja), kepala kerja statis - Pelat horizontal (benda kerja) Kontrol PC 85 (perangkat lunak woodWOP) Gujdpfjziapbjx Ahmsi Kabin pengaman untuk kepala kerja 2 penjepit benda kerja di area kerja Meja penyangga (penopang benda kerja) di sisi masuk Meja keluar (dengan sabuk transportasi) Dimensi minimal benda kerja (X-Y-Z) mm 200 x 100 x 8 (2 x 4 mm) Dimensi maksimal benda kerja (X-Y-Z) mm 3000 x 1000 (opsional: mm 1300)x 80 (2 x 40 mm) Dua benda kerja dapat diproses secara bersamaan (di sumbu Z) Dengan panel listrik dan kontrol terpisah. Daya koneksi total (Kw) 20 (sekitar) KELOMPOK KERJA (ATAS): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW 32 spindel bor vertikal independen (daya kepala bor 2,3 kW) 10 spindel bor horisontal independen (8 di X + 2 di Y) 1 agregat gergaji alur (dapat diputar 90° di arah X-Y), diameter 125 mm 1 spindel utama vertikal (unit frais) ETP (daya spindel utama vertikal 6 kW) KELOMPOK KERJA (BAWAH): 32 spindel bor vertikal independen (daya kepala bor 2,3 kW) 10 spindel bor horisontal independen (8 di X + 2 di Y) 1 agregat gergaji alur (dapat diputar 90° di arah X-Y), diameter 125 mm 1 spindel utama vertikal (unit frais) ETP (daya spindel utama vertikal 6 kW)

Kondisi: baru, Tahun pembuatan: 2025, de Gsdpjg Du Aqsfx Ahmsui

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: 0-250-12-2554, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 1.000 mm, lebar benda kerja (maks.): 3.000 mm, tinggi benda kerja (maks.): 80 mm, model controller: PC 85, technical-details-001 Gusdpfx Ajydnu Njhmsi