Kompresor sekrup

ATLAS COPCO GA 22 P

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Kompresor sekrup ATLAS COPCO GA22P – mesin setelah servis Data teknis: Kapasitas: 3,49 m3/menit; Motor 22 KW; Tekanan maks: 10 bar; Hfjdpfxew Nh S Sj Ahneh Tahun: 2013 Jam operasional: 8.796!!! Harga: 15.200 netto 18.696 bruto Kompresor sepenuhnya berfungsi, siap digunakan, bergaransi. Layanan purna jual dijamin. Tautan ke video di bawah ini.

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Hsdpfx Aheu Rptyenjfh Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), 1 used short bar loader Hjdpfxjht Rl Eo Ahnefh Manufacturer: Breuning Model: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Bar length: 100-1200 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Dijual konveyor yang terlihat pada foto. Silakan hubungi untuk informasi lebih lanjut. Hfedpfx Ahoxlaa Ssneh

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, tinggi total: 2.700 mm, panjang total: 2.800 mm, lebar total: 3.550 mm, lebar meja: 600 mm, panjang meja: 1.200 mm, beban meja: 800 kg, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 8.000 rpm, hidung spindel: SK40, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, V10 Vertical precision machining center with cross-table design Machine Specification: Control: FANUC 0i-MF Travel: X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Spindle nose to table surface: 150 - 750 mm Precision: Positioning accuracy: 0.008/0.006/0.006 mm (X/Y/Z) Repeatability: 0.005/0.004/0.004 mm (X/Y/Z) Table: Table size: 1,200 x 600 mm Max. load: 800 kg T-slot (table): 5x18x100 mm Spindle: Drive type: Belt drive Max. speed: 8,000 rpm Power: 7.5/11 kW Tool holder: SK40 Drawbar: MAS P40T-I (45°) Feed Rates: Rapid traverse (X/Y/Z): 36/36/36 m/min Cutting feed rate: 15/15/15 m/min Tool magazine: Capacity: 24 stations Type: SK40 Max. tool diameter: 80 mm Max. tool diameter (adjacent free): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Indexing (tool to tool): 2.5 secs Power supply: 30 kVA Machine weight: 6.5 t Dimensions (LxWxH): 2800 x 3550 x 2650 mm Standard configuration: • Control: Mitsubishi M80VB • 8,000 rpm belt-driven spindle • 24-position automatic tool changer • Pneumatic and hydraulic lubrication system • Coolant system • Internal coolant tank with chip conveyor • Full enclosure • Air gun • 3-color signal tower • Standard accessories • Chip cart • CE compliant Options: • SIEMENS 828D • FANUC 0i • 10,000 rpm belt-driven spindle • 12,000 rpm direct drive spindle • Spindle oil chiller Hsdpfevtz Dxjx Ahnsfh • NC rotary table, 4th axis • Tool measurement system • Tool magazine safety cover • Water gun • Oil skimmer • Chip conveyor with chip cart • Oil mist extraction (preparation) • Alternative coolant tank for aluminum chips • Air conditioning for electrical cabinet • Glass scales (not available for V6)

Kondisi: baru, Tahun pembuatan: 2023, Extraction capacity at connection*: 2,600 m³/h (free suction) Hfsdpfx Ahsh Rdxneneh Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions L/W/H in mm: L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour on request OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke; suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air output - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air output options available - Adaptable to pollutant load and air output requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for machining applications using pure oil, and for the separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters in the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitised and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 device variants and can be optimally configured for your specific application regarding size and performance. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are designed to achieve the best possible filtration efficiencies, service life, and trouble-free operation from an economic perspective.

Kondisi: baru, Fastech horizontal bandsaw semi-automatic BMSY 320 DGH Saw blade dimensions: 4160x34x1.1 mm Hedpfx Ahsg Ekp Njnjfh Blade speed: 20 - 100 m/min, stepless Cutting capacity 0° rectangular: 450x320 mm, round 320 mm Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 410x320 mm Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm Cutting capacity -30°: round 320 mm, square 320 mm, rectangular 420x320 mm Cutting capacity -45°: round 320 mm, square 320 mm, rectangular 340x320 mm Cutting capacity -60°: round 240 mm, square 220 mm, rectangular 230x220 mm Working height: 860 mm Coolant pump motor: 0.12 kW Hydraulic motor: 0.37 kW Main motor: 2.2 kW Length: 2260 mm Width: 1160 mm Height: 1700 mm Weight: 1030 kg Double miter saw Infinitely variable blade speed Hydraulic vise High-performance gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital display for miter angle

Kondisi: baru, 1 Hedpfjnzh Hfex Ahnefh

Kondisi: baik (bekas), Tahun pembuatan: 2014, Has been regularly serviced. Technical specifications: 81.2 L/s, 13 bar Connection values: 400V / 50Hz, 26 kW Width: 1260 mm Depth: 860 mm Height: 1500 mm Hsdpfxjvmpt Us Ahnjfh Weight: 520 kg

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Hwacheon T2-2T YSMC CNC Double Turret and Double Spindle Lathe, year 2018, equipped with SIEMENS SINUMERIK 840-D control, high-performance for complex and simultaneous machining, ideal for high-precision series production. Main technical features: Maximum swing over bed: Ø 880 mm Maximum turning diameter: Ø 460 mm (main spindle) / Ø 390 mm (sub-spindle) Turning length: 444 mm (upper carriage) / 437 mm (lower carriage) Bar capacity: Ø 65 mm (main and sub-spindle) Axis travels: X1: 245 mm / X2: 210 mm Z1/Z2: 520 mm Y: ±50 mm (total 100 mm) B: 550 mm Rotary axes C and A: Resolution 0.001° (360°) Spindles: Speed: 50 ÷ 5,000 rpm Power: 11/15 kW Spindle nose: ASA A2-6 Sub-spindle chuck: Ø 210 mm Tool holders: Upper/lower turret: 12 positions each, live tooling Live tool speed: 6,000 rpm, power 5.5 / 7.5 kW Tool dimensions: 25x25 mm (turning), Ø 40 mm (boring) Rapid traverses: Hsdpfowt S N Djx Ahnefh X1/X2/Z1/Z2/B: 30,000 mm/min Y: 15,000 mm/min Included accessories: TOP AUTOMAZIONI MAGIC bar feeder TOP AUTOMAZIONI RETURN D.65 automatic parts catcher Chip conveyor Coolant tank with pumps and 2 high-pressure pumps Various fixed and driven tool holders Tool presetter arm with dual head Manuals, electrical diagrams, CE declaration Complete and high-performance machine, perfect for high-productivity multitasking turning operations.