PUSAT PERMESINAN

AWEA BM-1400 II

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 610 mm, berat benda kerja (maks.): 1.500 kg, tinggi total: 24.920 mm, panjang total: 43.670 mm, lebar total: 30.700 mm, panjang meja: 1.600 mm, lebar meja: 700 mm, daya motor spindle: 11 W, pergerakan cepat sumbu Z: 24 m/menit, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, hidung spindel: Iso 40, kecepatan spindel (maks.): 8.000 rpm, kecepatan spindel (min.): 40 rpm, diameter alat: 75 mm, panjang alat: 250 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, NEW Vertical Machining Center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Included accessories: - Rotary table preparation - External spindle air blast - Left-side auger-type chip conveyors - Automatic high-pressure coolant system through the spindle at 20 bar - Workpiece washdown gun - Enclosure base wash system - 390-liter coolant collection tank Nodjrkn Iispfx Alkecr - 3-color end-of-cycle signal lamp - Full auto power-off system

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Ncsdpfecc D Ddox Alkor Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, Area kerja Kontrol: Fanuc 31i-B5 Lintasan X: 700 mm Lintasan Y: 400 mm Lintasan Z: 400 mm Luas meja penjepit: 850 x 410 mm Kapasitas beban meja (maks.): 400 kg Kecepatan rapat pada sumbu X/Y/Z: 54 m/menit Akurasi posisi: 0,006 mm Akurasi pengulangan: 0,004 mm Spindle Teknologi: Penggerak langsung Putaran maksimum: 24.000 rpm Daya maksimum: 26 kW Torsi maksimum: 35 Nm Tipe koneksi alat: BBT 30 Penukar alat Magazin alat: 21 slot Ncedpfx Aljydi Hyokjr Waktu pergantian alat: 1,3 detik Perlengkapan Pasokan pendingin: IKZ 20 Bar Pengukuran benda kerja: Renishaw OMP 400 Pengukuran alat: Renishaw Laser NC 4 Garansi: 12 bulan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 11.574 h, jarak pergerakan sumbu X: 1.525 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 625 mm, tinggi total: 3.235 mm, berat keseluruhan: 13.500 kg, panjang produk (maks.): 5.000 mm, DOOSAN MYNX 7500 II 3-sumbu ini diproduksi pada tahun 2020 dan dilengkapi dengan kontrol Heidenhain TNC 620 serta probe pengukuran TS 460. Mesin ini memiliki ukuran meja 1600 mm x 750 mm dan kecepatan spindle maksimum 12.000 rpm. Dengan dimensi 5000 × 4050 × 3235 mm dan berat 13.500 kg, ini adalah kesempatan yang sangat baik untuk membeli pusat pemesinan vertikal DOOSAN MYNX 7500 II ini. Hubungi kami untuk informasi lebih lanjut. • Panjang meja: 1600 mm Ncsdpex U Dtwofx Alkjr • Lebar meja: 750 mm • Taper spindle: ISO 40 Double Contact • Kecepatan spindle maksimum: 12.000 rpm Dimensi Kedalaman mesin: 4050 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 7.600 h, Fungsionalitas: berfungsi sepenuhnya, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Kategori: Pusat Pemesinan Vertikal (VMC) No. Referensi: 311119 Kapasitas: 700 x 400 x 330 mm Tahun Pembuatan: 2000 Spesifikasi Teknis: SPINDEL Taper Spindel: BT 30 Kecepatan Spindel: 8000 RPM Motor Spindel: 3,7 / 5,8 kW KAPASITAS KERJA Gerak (XYZ): 700 x 400 x 330 mm Rel Pemandu: LM ATC Kapasitas Ganti Tool: 14 tool Ncjdpfox Ehi Ijx Alkjr CNC Kontrol: Fanuc 16iM Detail Tambahan: Dengan Nikken 170 sumbu ke-4

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Ncjdpfx Ajlz Rvlelksr Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Ncodpfxjifn N Ne Alksr Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A04B-0105-B133#BBH, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 330 mm, gerak cepat sumbu X: 54 m/menit, pergeseran cepat sumbu Y: 54 m/menit, pergerakan cepat sumbu Z: 54 m/menit, lebar meja: 850 mm, panjang meja: 410 mm, beban meja: 300 kg, berat keseluruhan: 2.200 kg, kecepatan spindel (maks.): 10.000 rpm, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: 2x FANUC Robodrill α-D21MiB5 Plus – Ready for Immediate Use We are offering two FANUC Robodrill α-D21MiB5 Plus machining centers in excellent condition. These machines combine high speed, precision, and reliability, making them ideal for both series production and flexible machining operations. Both machines have seen minimal use, have been professionally maintained, and are equipped with valuable options that are typically charged extra. Highlights & Equipment: - Year of manufacture: 03-2022 and 06-2022 - Large chip conveyor - High-pressure coolant pump through the spindle - Extraction unit - Data server via FTP - Fanuc Program Transfer Tool (software) - All tool holders as shown in the photo - Manuals included - Always serviced by Humacs Krabbendam - Low operating hours These Robodrills are immediately deployable and present an excellent opportunity to invest in young machines with comprehensive options, without the manufacturer’s lead time. The listed price is per machine. Nedpsxwiglofx Alkocr Interested? Please feel free to contact us for more information, specifications, or to arrange a viewing.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a welding robot system with the following components: Elite Robot CS620 (1750mm reach) with programming flange and software Fronius TPSi 500 rotateZERO 500 positioner with 1800mm x 800mm intermediate frame Machine base frame Ncodpfjv Dvlljx Alkor The system is immediately ready for welding.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Technische Daten auf den Fotos ersichtlich. Teile, die von Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Ncjdsufp Svspfx Alkjr