Mesin frais

AXA VCC

Kondisi: baik (bekas), Tahun pembuatan: 2009, Diameter roda - maks. 1200 mm Lebar roda 260 mm Modul - maks. 16 Modul - min. 0,5 Langkah (stroke) 270 mm Jarak spindle/meja 920 mm Penahan roda pemotong - SK Kontrol Bosch MTX Diameter meja 900 mm Diameter benda kerja maks. untuk roda gigi dalam 1200 mm Jumlah langkah - tanpa tahapan 50-1000 langkah/menit Diameter spindle 125 mm Lubang meja 320 mm Jarak sumbu Min/Maks 0-820 Njdpfx Aqowzmpzslswl Daya penggerak kepala pemukul 30 KW Kebutuhan daya total 72 KVA Berat mesin sekitar 24 t Kebutuhan ruang sekitar 6,5x2,9x4 m M8160132

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 20 rpm, lebar meja: 1.000 mm, panjang meja: 4.200 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Travel/Capacity: Longitudinal (X): 4,000 mm Transverse (Y): 1,200 mm Vertical (Z): 1,500 mm Table dimensions: Length: 4,200 mm Width: 1,000 mm T-slot width: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 30 kW Spindle speed range: Spindle speed: 20–3,000 rpm Feed rates: X, Y, and Z axes 2 – 12,000 mm/min Max. rapid traverse speed: X, Y, and Z axes 15,000 mm/min Weight: approx. 22,000 kg HEIDENHAIN iTNC 530 Automatic MTE Diagonal Milling Head Coolant System Nedpfey T Ellox Aqljwl RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured through a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our skilled service team.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Nsdeyn Em Repfx Aqlswl Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Kondisi: sangat baik (bekas), SK 50 tool holders (28627) various manufacturers: Nwjdpjwl U Tcofx Aqljl Bilz Kelch Sandvik Clarkson approx. 90 pieces

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 650 mm, diameter pembubutan: 400 mm, Fanuc Oi-TD control 3-jaw chuck, diameter 250 mm 12-position turret Tailstock Chip conveyor The machine has only 4051 power-on hours Technical details: Swing diameter: 650 mm Turning diameter: 400 mm Turning length: 650 mm Nwedpfovi Haqsx Aqlsl X-axis travel: 230 mm Z-axis travel: 650 mm Max. spindle speed: 4500 rpm Number of tool stations: 12 Spindle drive capacity: 11/15 kW Weight approx.: 5400 kg Technical data, accessories and machine description are non-binding.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 2.450 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 12.001.400 mm, jarak gerak sumbu Z: 18.001.790 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 3.000 kg, tinggi total: 4.700 mm, panjang total: 12.700 mm, lebar total: 7.800 mm, diameter meja putar: 2.200 mm, kecepatan rotasi (maks.): 200 rpm, berat keseluruhan: 57.000 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 2.450 h, pasokan pendingin: 40 batang, jumlah slot dalam magazin alat: 60, panjang alat: 460 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 6000 Travel Y-axis mm: 1200/1400 Travel Z-axis mm: 1800 (H) / 1790 (V) C-axis indexing degrees: 360º (0.001) A-axis indexing degrees: ±180° B-axis indexing degrees: ±180° Rapid traverse m/min: 30 Worktable Pallet dimensions mm: 6000 x 1235 NC milling/turning table: Pallet dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 Max. torque Nm: 4600 Spindle Max. spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/continuous) Spindle torque Nm: 382/278 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 With empty adjacent pockets mm: 200 With adjacent pockets occupied mm: 104 Max. tool length mm: 460 Max. tool weight kg: 25 Tool change time (chip-to-chip) sec: 9.8 Nsdpfjzb H Tfsx Aqlowl Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rinsing gun Operating mode 4 Blow air through spindle center selectable via M function Work area lighting DXF import function Paper band filter Automatic work area door Mounted indexing device for shaft machining Axes can be clamped hydraulically via M function (optional) Machine operating hours: Power-on hours: 29,447 Spindle operating hours: 2,450 Basic machine: Dimensions / Weight Length mm: 12,700 Width mm: 7,800 Height mm: 4,700 Weight kg: 57,000

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle speed: 3,000 rpm - Max. bar diameter: 80 mm - Max. machinable diameter: 300 mm - Max. diameter over bed: 520 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle speed: 6,000 rpm - Max. bar diameter: 53 mm - Minimum C-axis resolution: 0.001° - Travel: 520 mm TURRET - Number of positions: 12 - Travel X/Z: 230 / 460 mm - Driven tool speed: 4,500 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 22.5 kVA WEIGHT AND DIMENSIONS - Footprint: 3,050 x 1,860 mm - Machine height: 1,850 mm - Machine weight: 5,500 kg EQUIPMENT Nwsdpfouhbnnsx Aqljl - Control: OSP-P300L-R - Coolant tank * with high-pressure pump - Chip conveyor - Parts remover - Parts conveyor belt - Bar feeder: Top Automation FU352 - Fire suppression system * * NB: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Description Control: Sinumerik 810M Spindle speed: 5000 rpm Turret head: 12-position Table clamping surface: length 850 mm, width 325 mm Very good condition, regularly serviced. Nwodpfx Asvt Amujqlol Operating manual in German Number of axes: 3 (X, Y, Z) Travel paths: X 420 mm, Y 330 mm, Z 240 mm Control system: Sinumerik 810 M Max. spindle speed: 5000 rpm Automatic tool changer for 12 tools Tool holder: SK40 Coolant system

Kondisi: baik (bekas), 3 "GOODY" bench vices Nsdperai Aksfx Aqlewl

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Base machine CTX 200E with driven tools, C-axis, and 1x sub-spindle machining. Includes DATAPILOT software package TurnPlus, control cabinet cooling unit, hinged belt chip conveyor, discharge height: 1100 mm including coolant tank, set of tool holders for the universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank interface, sealing plugs, reduction sleeves. Complete axial bar gripper, workpiece pick-up unit, 3x axial tool spindles for drilling/milling/tapping, 1x radial spindle for drilling/milling/tapping, 1x for saw blades, complete collet chuck for main spindle, complete collet chuck for sub-spindle, 17x round DIN collets 173E, Ø 3–40 mm, 2x hex DIN collets 173E, SW 7 and 12 mm, 2x square DIN collets 173E, SW 8 mm. Bar feeder magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar feeder IEMCA BOSS 542/32, Ø 8–41 mm. Complete documentation included. The machine has been idle for one year as the turret head is missing; no further defects known, operating hours unknown, no maintenance records available. Includes bar loader and numerous tools. Nwodpfx Aqsw Tl Ifsljl