5 Achsen Universal Portalzentrum

AXA VPC 45-U

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, Herewith I offer you a very well-maintained, as-new AXA VPC 45 U. The machine is immediately available. Inspection under power and in operation is possible at any time; video footage is available. Dodpoyh Nrzjfx Abhokh Machine operating hours ON: approx. 40,000 Spindle operating hours ON: approx. 25,000 Travels (Linear axes): X-axis: 2,940 mm Y-axis: 1,400 mm Z-axis: 900 mm 5-Axis Simultaneous Machining: The machine is a genuine 5-axis machining center and enables true simultaneous 5-axis milling with X/Y/Z + B-axis (infinitely variable swiveling head) + C-axis (NC rotary table). This allows workpieces to be machined in one setup from various spatial orientations in continuous motion. Machine (Basic Data) Machine type: Vertical Gantry Machining Center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH Model: VPC 45 U Year of manufacture: 2014 General Technical Data Overall length: 6,800 mm Overall width: 3,600 mm Overall height: 4,100 mm Total weight: 29 t Electrical Data Connection voltage: 3×400 V / 230 V / N / PE, 50 Hz Power rating: 69 kVA Pre-fuse: max. 125 A Control voltage: 24 V Spindle Spindle type: Hollow-shaft motor, water-cooled Speed range: 30–10,000 rpm Tool holder: SK40 Drive motor: DME 112 AL-4FGS (Kessler) Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm NC Rotary Table Rotary table: RTA 6S-1500 Table diameter: Ø 1,500 mm Weight: 2,700 kg Max. transport load (vertical rotary axis): 10,000 kg Tool Changer Tool changer: Type M Number of tools: 100

Kondisi: bekas, x-travel 1050 mm y-travel 600 mm z-travel 600 mm Control: Fanuc Machine weight approx. 7200 kg 8000 rpm Tool holder: 24 Djdpfx Asvnh Umsbhjkh

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.000 mm, panjang pembubutan: 8.000 mm, panjang total: 10.500 mm, A used lathe from the Italian manufacturer Leopold Pontiggia, model NH 500, is being offered for sale. Technical specifications: Dsdpfov Epigsx Abhskh Swing over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as shown in the photos: - 1 x 3-jaw chuck - 1 x 4-jaw chuck - 1 x steady rest - Various adapters

Kondisi: baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 13639, Steuerung: Heidenhain Verfahrwege: X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 min⁻¹ Antriebsleistung Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorne am Lager: 70 mm Aufgerüsteter Werkzeugwechsler, Kapazität: 100 Plätze Schwenkrundtisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbereich C-Achse: 360° Maximale Tischbelastung: ca. 1.000 kg Maximaler Werkzeugdurchmesser: 80 mm Maximaler Werkzeugdurchmesser bei freiem Nebenfach: 125 mm Djdpeinh Rqsfx Abhskh Maximale Werkzeuglänge: 300 mm Maximales Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X/Y/Z): 30 m/min Elektrischer Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Weitere Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin frais 5 sumbu Jobs. Tipe jomach 143. CNC Fidia. Tahun 1994. X4000 Y2700 Z1250. A 190. C kontinu. B. W. Harga 85.000 € Dkodpfx Aoxr I Scebheh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Max. turning diameter: 658 mm Max. turning length: 1,519 mm Travels: X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis: -30 to 210° Rapid traverse (X/Y/Z/W): 50/40/50/30 m/min Main spindle: Drive power: 30 kW Max. spindle speed: 4,000 rpm C-axis Max. bar capacity: 80 mm Sub spindle: Drive power: 26 kW Max. spindle speed: 4,000 rpm C-axis Milling spindle: Drive power: 24 kW (oil-air lubrication) Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool stations Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment: Mayfran Consep 2000 II chip conveyor, double change filter Preparation for high-pressure coolant system (IKZ) 70 bar 70 bar high-pressure pump, 7 pressure stages Air blowing device on upper turret Interface for bar loader Automatic parts catcher (D:80 x L:150 x 5 kg) Gear hobbing Synchronized thread cutting with milling spindle Constant rapid traverse angle during movement Thread re-cutting function Turning/milling function under Mazatrol 5-axis machining package for SmoothX -EIA/ISO 5-axis simultaneous machining -F) Tool tip control for 5-axis simultaneous machining -Spline fine interpolation -5-axis spline interpolation Sub spindle with C-axis incl. synchronization C1+C2 Prepared for multiple and flash tool tool holders Dimensions / Weight: Dimensions (LxWxH): 4,910 x 2,800 x 2,720 mm Weight: 16,900 kg General machine options: B-axis 0.0001° Main spindle C-axis positioning accuracy 0.0001° Sub spindle positioning without C-axis positioning accuracy 0.001° Absolute positioning system (linear axes) Work area lighting Operator door with interlock switch CE conformity Double footswitches for main and sub spindle Separate controls for opening/closing the chucks Hydraulic pressure interlock Fully enclosed work area Automatic opening/closing of main and sub spindle chuck jaws Chuck status feedback for main and sub spindle Chuck status feedback via sensors Tooleye for upper and lower turret Lead error correction input X, Y, Z Standard tool set (lower turret) Dkodpfx Aoyam D Ujbhjh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management Dodpfxjxmhdno Abhokh - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: bekas, Tahun pembuatan: 2005, Mesin bubut Mazak QTN 200, tahun pembuatan 2005 Mazatrol 640T Chuck 210mm Kitagawa BB 208 Lubang spindle 65mm Panjang pembubutan 500mm Dedpfx Abexgpqpjhskh Diameter pembubutan 380mm Tailstock Probe alat

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Dodpfx Abjw Au H Rehokh Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Pre-fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully functional, very good condition. Dismantled and stored, immediately available.

Kondisi: bekas, Travel in X-axis: 6500/13,150 mm Travel in Y-axis: 4000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 2250 mm Control system: Sinumerik 840 D Clamping surface of table: 5500/12,150 x 3000 mm Passage between columns: 3500 mm Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – stepless: 6.3 - 4000 rpm Milling spindle motor: 63 kW Torque at the spindle: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z = 24,000 mm/min Total power requirement: 120 kVA Machine weight approx. 245 t Required space approx. 29 x 7.7 x 8.1 m The machine is in almost as-new condition and was completely overhauled and modernized in 2020 for €1.6 million! Equipment/Accessories: - Automatic tool magazine for 153 tool positions - Automatic milling head magazine for 6 milling heads - Machining modules/milling heads:  Machining module – straight – straight long –  Machining module – angle standard – 4000 rpm, 144 x 2.5b0, ISO 50  Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5b0, ISO 50  Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5b0, B-axis +/- 44 x 2.5b0, ISO 50 Dodpfswa Dx Rjx Abhjkh - Coolant system - Chip conveyor - Technical documentation