Wadah kantor

Aztech 3x3m

Kondisi: baik (bekas), 1 Knsdsh Hx Nhspfx Aahef

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Mitre saw with a blade diameter of 600 mm (optionally 800 mm) - Manual mitre adjustment - Pneumatic table clamping Knsdpfed Rhzwjx Aahjf - Pneumatic workpiece clamping (clamping cylinders’ height and inclination angle continuously adjustable) - Two-hand safety control Optional features: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Automated saw version - Pre-load magazine - Horizontal clamping device - Extraction system - Further accessories available on request We would be pleased to provide you with a quotation tailored to your specific requirements. The machine can be inspected and tested at 56812.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Ksdpfxeg Ey Rfo Aahsnf Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SAPI Jumbo, tekanan: 12 batang, lebar total: 3.087 mm, tinggi total: 2.078 mm, panjang total: 3.692 mm, berat keseluruhan: 3.000 kg, lebar dalam: 2.340 mm, panjang dalam: 3.520 mm, tinggi dalam: 2.500 mm, berat benda kerja (maks.): 500 kg, luas filter: 20 m², Perlengkapan: pencahayaan, This fully operational, assembled, walk-in JUMBO blasting cabin offers a comprehensive solution for efficient blasting operations. Equipped with 2 LED blast chamber lights, it ensures optimal illumination of the work area. The double-winged door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s service life. For air filtration and dust reduction, the cabin is fitted with a powerful cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor with grating cover provides automatic recovery of the blasting media, and the electrically powered drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance media reclaimer to efficiently process and reuse the blasting media. The pressure blast vessel with a capacity of 38 liters offers sufficient volume for extended work cycles. The scope of delivery also includes a 10-metre blasting hose and a durable boron carbide nozzle, ensuring optimal blasting results. This blasting cabin is ideally suited for companies seeking a reliable and efficient solution for blasting applications. Kjdpfjukdfpsx Aahenf *Special equipment such as loading trolleys is also available on request* Compressed air and electrical supply, as well as installation, are to be provided by the customer. If we have aroused your interest, please feel free to contact us at any time!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, The granulate mixer is available in 6 versions: Execution can be in stainless steel or painted steel: Technical data: MV 2 The MV 2 is designed for thorough mixing of the entire plastic granulate, thanks to the forced guidance via the screw sleeve. Koded R Atrspfx Aahenf Container capacity: 120 kg / 200 L Dimensions (L x W x H): 700 mm x 700 mm x 1050 mm / 1250 mm - Removable screw conveyor - Mixing time control unit - Extraction device - 1 discharge outlet - Mobile frame, 100 mm castors, all with parking brakes.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level. Knjdpoqt Dmysfx Aahjf

Tahun pembuatan: 2024, jam operasional: 10 h, Kondisi: hampir baru (bekas), Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without difficulty. The stuffing unit reliably compacts loose material and feeds it directly to the extruder. This ensures uniform material intake and stable extrusion, even with challenging feedstocks. Advantages: • Effortlessly processes all types of polyolefins Ksdstziudjpfx Aahsnf • Ideal for light and bulky materials such as EPS or film regrind • Efficient material feeding thanks to integrated stuffing unit • Compact design, easy to maintain - Single-screw extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit - Hopper for material feed (suitable for low bulk density material) - Large filter / screen changer - Strand die adapted

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross travel: 920 mm, intermittent cross feed: 750 mm/pulse, continuous cross feed: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic plate dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1000 h, cycle time: approx. 400 h. Includes Hyfra sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and disassembled. Documentation available. On-site inspection possible. Knsdjwi Tpkspfx Aahof

Kondisi: baru, nomor mesin/kendaraan: 1, berat kosong: 10.200 kg, berat muatan maksimum: 28.800 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 13.650 mm, lebar ruang muat: 2.550 mm, tinggi ruang muatan: 850 mm, suspensi: udara, ukuran ban: 245.70 r 17.5, warna: merah tua, Tahun pembuatan: 2021, Perlengkapan: ABS,

Kondisi: baru, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Item number: SH230-1NCHS Motor power: 2.2 kW Vice opening: 235 mm Blade dimensions: 2950x27x0.9 mm Weight: 1,000 kg Speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic band saw with semi-automatic and fully automatic modes. Max. remnant piece length: 70 mm. Bundle cutting up to 230 x 230 mm. CNC band saw equipped with the new MEP 50 Windows-based control system. Knedpfx Aschhfusahof Material feed via stepper motor over ball screw spindle, mounted on opposing ball bearings. Single stroke of 500 mm, repeatable for any cutting length. Easy programming: just enter cut length and quantity, then press "START". Electronic blade tension control. Automatic cutting force monitoring via a servo valve located directly on the cylinder. Band rotation control with instant stop in case of band blockage.