Gerobak Penanganan Kayu Bulat RUW 1703

Baljer & Zembrod RUW 1703

Tahun pembuatan: 2011, Kondisi: hampir baru (bekas), For sale: 1 roller conveyor, each including a geared motor. Technical data: Year of manufacture: 2011 Nedoihpn Nspfx Ahwoku Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details, see type plate image) Three out of four roller tracks are equipped with a wooden side wall along the entire length. One roller track has a wooden side wall for a length of 5.20 m. Two out of four roller tracks are each equipped with 3 lateral removal systems (see pictures).

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Üstünkarli UDKP 160 Nkodpfx Ajucnudohwsu Cutting height: 160 mm Chain bed approx. 420 mm With spikes in the chain bed Includes slat bush and spacer rings Main motor: 75 kW

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 288, Entrindungsmaschine mit Einlaufband, geeignet für maximale Stammdurchmesser von entweder bis zu 460 mm oder 600 mm, Vorschubgeschwindigkeit bis zu 100 m/min, ausgestattet mit Reduzierrotor und Entrindungsrotor. Der Entrindungsrotor mit einer Öffnung von 620 mm ist NEUPRODUZIERT und wird mit Garantie geliefert. Inklusive Vorrichtung zum Wechseln des Reduzierrotors. Auf den untenstehenden Fotos ist der aktuelle Zustand im demontierten Zustand zu sehen. Lieferzeit beträgt ca. 3 Monate ab Bestellung. Nedpfx Ahstk N Dkewoku

Kondisi: bekas, Tahun pembuatan: 2002, jam operasional: 37.000 h, nomor mesin/kendaraan: 1651, jangkauan lengan: 15.200 mm, kapasitas angkut: 1.900 kg, lebar track: 3.000 mm, Perlengkapan: derek, kabin, Year of manufacture: 2002 Machine number: 1651 Track width (m): 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grapple: 1,900 kg at 15.0 m Grapple: included Njdpfsv Hwk Usx Ahweku Crane position: behind the cab Cabin side: center !! Sale on behalf of customer !!

Kondisi: bekas, Tahun pembuatan: 2021, diameter mata gergaji: 800 mm, kecepatan rotasi (min.): 1.450 rpm, daya: 5,5 kW (7,48 hp), Cross-cut saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Robust steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety operation Nksdpfx Aed Szf Nohweu Coolant system Protective cover Optionally available with length measuring system or automatic positioning system Also available as saw-drilling or saw-punching automatic machine upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 122.471 h, Fungsionalitas: berfungsi sepenuhnya, daya: 1.095 kW (1.488,78 hp), bahan bakar: gas rumah tangga L, kecepatan rotasi (min.): 1.500 rpm, jenis arus masuk: tiga fasa, en-de-jenbacher-j320-description Nkjdpoxb D Hbofx Ahwju

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Nodpfx Ahew Sy T Howjku Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: baik (bekas), The debarker is perfectly suited for processing both hardwood and softwood logs. - Trolley made of heavy-duty steel construction - 5 pairs of drive wheels Nkjdpfx Ahjtuyr Ijweu - Milling arm constructed from heavy-duty steel - Hydraulic milling head - 22 kW motor Please note: The log feeder visible in the photo is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR.

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: sangat baik (bekas), Storti RM 500 Edger - Manufactured in Italy - Year of manufacture: 1993 - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Max cutting width: 435 mm - Max cutting height: 170 mm Nedpfjk Talpox Ahwjku - Motor power: 2 x 22 kW - Max element width: 600 mm - Minimum material length: 800 mm - Max saw blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Feed rollers motor power: 2 x 1.1 kW - Automatic pneumatic roller pressure - Seven lower toothed feed rollers - Electric saw blade positioning - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers D100 mm - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg